Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Terminal Finish: TIN; JESD-609 Code: e3;
Median Price
$1.316
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.010
100+ parts
$1.098
1k+ parts
$0.948
10k+ parts
$0.445
Avnet
-
$0.623
Digiode
$2.062
Vyrian
$2.170
Flip Electronics
Nova Conductors
Andel Nordic
$0.910
$0.638
Ampacity Inc.
$1.710
Decca Corp
$1.676
$1.659
Corphita
$1.953
Perfect Parts
Eastek
Argo Parts USA
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Component Stockers USA
Aranea Global
Supply Digital
Continental Prestige Electronics
Visible LEDs HLMA-PL00-QRR11 attributes and parameters. Explore more Visible LEDs devices from Broadcom
JESD-609 Code:
Optoelectronic Type:
Terminal Finish:
HLMA-PL00-QRR11 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Subminiature Lamps Qualification 22/Nov/2013
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Daco Semiconductor
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
HSMG-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
HSMG-C120
Broadcom
HSMG-C120 by Broadcom is a 1.2mm single color LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 155°, it's suitable for surface mount configurations in various electronic devices. Operating b/w -40°C to 85°C, this LED offers clear untinted nondiffused lighting with a nominal luminous intensity of 15.0mcd.
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
598-8010-107F
Dialight
Dialight's 598-8010-107F is a single color LED with water clear lens, ideal for surface mount applications. Featuring a size of 1.1mm and max forward current of 0.025A, it emits red light at a wavelength with luminous intensity of 60.0mcd. Perfect for compact electronic devices requiring efficient and bright illumination.
LTST-C150TBKT
Lite-on Technology
LTST-C150TBKT by Lite-on Technology is a 2.06mm BLUE LED with WATER CLEAR lens, operating at -20 to 80 °C. It has a peak wavelength of 468nm, forward current of 0.02A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with a luminous intensity of 70.0mcd.
ASMT-UWBG-NACF8
ASMT-UWBG-NACF8 by Broadcom is a single color LED with max forward current of 0.1A and max operating temp of 100°C. At 1.1mm height, it emits white light at 120° viewing angle. Ideal for applications requiring low power consumption and high brightness in compact spaces.
SSL-LX2573GD
Lumex
SSL-LX2573GD by Lumex is a 5mm green LED with a peak wavelength of 565nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring a diffused light source, such as indicator lights in electronic devices.
MSL0402RGBU1
ROHM
ROHM's MSL0402RGBU1 is a triple color LED with separate 3-element configuration. It has a max forward current of 0.03A and nominal luminous intensity of 400/550/180 mcd. Ideal for surface mount applications, this RGB LED operates b/w -40 to 85°C, making it suitable for various lighting and display projects.
551-0607-004F
Dialight's 551-0607-004F is a 3mm green LED array with 4 separate elements. It has a peak wavelength of 565nm, forward current of 0.02A, and max voltage of 7.5V. Ideal for applications requiring high luminous intensity and a wide viewing angle in industrial settings.
KP-3216SGC
Kingbright Electronic
Kingbright Electronic's KP-3216SGC is a 2mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.025A, it offers super bright green light ideal for surface mount applications in electronics.
SSL-LX5093XUSBC
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
SML-D12U8WT86S
ROHM's SML-D12U8WT86S is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, emitting RED light at 63.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
555-2001F
Dialight's 555-2001F is a 2mm single color LED with peak wavelength of 655nm. It has a max forward current of 0.05A and viewing angle of 90°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
OVS-0803
SPC TECHNOLOGY/ MULTICOMP
OVS-0803 by Spc Technology/Multicomp is a 1.4mm BLUE LED with WATER CLEAR lens. It has a max forward current of 0.03A and viewing angle of 130°, suitable for SURFACE MOUNT applications in electronics due to its compact size and high luminous intensity of 100.0mcd.
TLUV5300
Temic Semiconductors
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.5; Lens Type: UNTINTED DIFFUSED; T-code: T-1 3/4;
SML-D12M8WT86CN
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B
Osram Opto Semiconductors
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B is a 2.8mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, diffused lens, and max forward current of 0.04A. Ideal for surface mount applications in electronics requiring red/true green/blue illumination with a viewing angle of 120° and luminous intensity up to 2200mcd.
APT1608SURCK-AMT
Kingbright Electronic's APT1608SURCK-AMT is a 1.2mm SINGLE COLOR LED with 0.03A forward current, emitting HYPER RED light at 650nm wavelength. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 260.0mcd, operating b/w -40°C to 100°C temperatures.
APT1608ZGCK
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
SSL-LXA3025IGC-TR
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMA-QH00-S0031
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 500.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: TIN;
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 500.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMA-KL00-I0000
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: MATTE TIN;
HLMA-QG00-S0021
HLMA-QH00-S0011
HLMA-PG00-N0011
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 75.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: TIN;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 75.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMA-QL00
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Voltage: 2.4 V; Additional Features: CMOS COMPATIBLE;
Visible LEDs; Lens Type: TRANSPARENT; Terminal Finish: TIN; Viewing Angle: .1 deg; JESD-609 Code: e3; Peak Wavelength (nm): 590;
Visible LEDs; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e0; Maximum Reverse Voltage: 5 V;
HLMA-QL00-UVR11
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 825.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: TIN;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 825.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMA-CH15-OPTION-001
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1300; Lens Type: UNTINTED NONDIFFUSED; Terminal Pitch: 2.54 mm;
HLMA-CG17-OPTION-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 800; Lens Type: UNTINTED NONDIFFUSED; No. of Functions: 1;
HLMA-CH15-OPTION-002
HLMA-CH15-OPTION-007
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1300; Lens Type: UNTINTED NONDIFFUSED; No. of Functions: 1;
HLMA-CG15-OPTION-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 800; Lens Type: UNTINTED NONDIFFUSED; Shape: ROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved