Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 256; Package Code: HLFQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$4.000
$3.920
$3.881
AZTECH Wire
$10.130
Vigor
$31.940
Microchip USA
$48.313
Supply Digital
Native Components
Northwest PG Solutions
Corphita
Network Interfaces BCM53128VKQLEG attributes and parameters. Explore more Network Interfaces devices from Broadcom
Additional Features:
Data Rate:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BCM53128VKQLEG Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - BCM53128 23/Sep/2021
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
DP83848CVV/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83640TVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
LAN8720AI-CP-TR-ABC
Microchip Technology
LAN8720AI-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a low supply current of 54 mA at 3.3V, suitable for industrial applications requiring reliable network interfaces in compact square chip carrier packages.
TJA1043T
NXP Semiconductors
NXP Semiconductors' TJA1043T is a 14-terminal interface circuit with 5V supply voltage, supporting data rates up to 5 Mbps. AEC-Q100 screened for automotive applications, it features Gull Wing terminals and small outline package style. Ideal for network interfaces in compact designs with peak reflow temperature of 260°C.
KSZ8041NLI-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8851SNL
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1050T
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DP83848MSQ/NOPB
DP83848MSQ/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a 40-terminal chip carrier package suitable for commercial temperature grades. This network interface IC is designed for surface mount applications in various electronic devices.
ISO1050DWR
ISO1050DWR by Texas Instruments is a 16-terminal network interface with a small outline package. It operates b/w -55 to 105°C, with a peak reflow temperature of 260°C. Ideal for telecom applications requiring an interface circuit at a nominal voltage of 5V.
KSZ8081RNBCA-TR
LAN8741A-EN
Standard Microsystems
VSC8541XMV-02
VSC8541XMV-02 by Microchip Tech is an Ethernet transceiver with 1000 Mbps data rate. It operates b/w 0-125°C, has 68 terminals in a square package style, and is surface mountable. Ideal for telecom applications requiring high-speed network interfaces.
KSZ9031MNXCA-TR
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1028TK/3V3/20,1
NXP Semiconductors' TJA1028TK/3V3/20,1 is an AEC-Q100 compliant network interface IC with 8 terminals. It operates at -40 to 150°C, drawing a max of 4.5mA at 3.3V. Ideal for telecom applications, this small outline package has a terminal pitch of 0.65mm and no-lead terminal form.
SJA1105PELY
SJA1105PELY by NXP Semiconductors is a network interface with 159 terminals, supporting a data rate of 1000 Mbps. It operates b/w -40 to 125°C and has a max supply current of 200 mA. Ideal for telecom applications, this IC features a low profile grid array package style.
TCAN1042HVDR
TCAN1042HVDR by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates in a temperature range from -55 to 125°C, making it suitable for military applications. With a nominal voltage of 5V and max supply current of 180mA, this network interface IC is designed for high-reliability communication systems.
TJA1057GT/3
NXP Semiconductors' TJA1057GT/3 is a network interface IC with AEC-Q100 screening. It features 8 terminals in a small outline package, suitable for telecom applications. Operating at 5V, it has a terminal pitch of 1.27mm and gull wing terminal form.
SN65HVD231QDRG4
SN65HVD231QDRG4 by Texas Instruments is a BICMOS interface circuit with 1 Mbps data rate, suitable for automotive applications. It operates at 3.3V and has a max supply current of 0.017 mA, making it ideal for network interfaces in harsh environments. This small outline package with gull wing terminals can withstand temperatures from -40 to 125°C.
88E1512-XX-NNP2I000
Marvell Technology
Marvell's 88E1512-XX-NNP2I000 is a square-shaped Ethernet transceiver chip carrier with 56 terminals. It operates at a nominal voltage of 3.3V and is designed for network interfaces, suitable for surface mount applications in telecom equipment.
MCP2562-E/MFVAO
MCP2562-E/MFVAO by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, -40 to 125°C temp range. Small outline package with 8 terminals, AEC-Q100 screening.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCM5241A1IMLGT
Broadcom
BCM5241A1IMLGT by Broadcom is an Ethernet transceiver with a 2.5V supply voltage and silver terminal finish. It has a peak reflow temperature of 260°C and MSL level of 3, making it suitable for network interfaces in various applications.
BCM54811A2IMLG
ETHERNET TRANSCEIVER; Terminal Form: UNSPECIFIED; No. of Terminals: 48; Package Shape: UNSPECIFIED; No. of Functions: 1; Technology: CMOS;
BCM5241A1IMLG
ETHERNET TRANSCEIVER; Package Shape: UNSPECIFIED; Package Body Material: UNSPECIFIED; Terminal Finish: SILVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
ETHERNET TRANSCEIVER; Package Shape: UNSPECIFIED; Package Body Material: UNSPECIFIED; JESD-609 Code: e4; No. of Functions: 1; Terminal Finish: SILVER;
BCM5221A4KPTG
BCM5221A4KPTG by Broadcom is an Ethernet transceiver with a data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a compact square package (10mm x 10mm). Suitable for network interfaces in various applications.
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
BCM53134OKFBG
ETHERNET TRANSCEIVER; Moisture Sensitivity Level (MSL): 3;
BCM53128KQLEG
ETHERNET TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 256; Package Code: HLFQFP; Package Shape: SQUARE; Maximum Seated Height: 1.6 mm;
BCM5461SA1IPFG
Network Interfaces; Terminal Finish: TIN SILVER COPPER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e1;
Network Interfaces;
BCM53128VIQLEG
ETHERNET TRANSCEIVER;
BCM53134SIFBG
BCM5241XA1KMLG
ETHERNET TRANSCEIVER; Terminal Form: UNSPECIFIED; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XXSS-X; Moisture Sensitivity Level (MSL): 3;
BCM54210B0IMLG
BCM5241A1KMLGT
ETHERNET TRANSCEIVER; Terminal Form: NO LEAD; Package Code: QCCN; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER; JESD-609 Code: e3;
ETHERNET TRANSCEIVER; Terminal Form: NO LEAD; Package Code: QCCN; Package Shape: SQUARE; JESD-30 Code: R-XQCC-N; No. of Functions: 1;
BCM53134MIFBG
BCM53134MIFBG by Broadcom is a Network Interfaces IC with 212 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial use. This Ethernet transceiver has a thin profile, ball terminal form, and 1V supply voltage for telecom applications.
BCM5221A4KPTGT
BCM5241A1KMLG
ETHERNET TRANSCEIVER; Package Shape: UNSPECIFIED; Nominal Supply Voltage: 2.5 V; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Package Body Material: UNSPECIFIED;
ETHERNET TRANSCEIVER; Package Shape: UNSPECIFIED; Package Body Material: UNSPECIFIED; Nominal Supply Voltage: 2.5 V; Terminal Finish: MATTE TIN; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved