Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACPL-824-300E by Broadcom is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -30°C to 100°C. With an isolation voltage of 5000V, it is ideal for applications requiring high electrical separation.
Median Price
$1.290
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.675
1k+ parts
$0.540
10k+ parts
$0.457
EBV Elektronik
-
Digiode
$1.188
Bristol Electronics
$1.350
$0.499
$0.351
VNN
Vyrian
ComSIT Distribution GmbH
Dan-Mar Components
Flip Electronics
ACDS - Activité Composants Distribution Service
Fibra_Brandt Electronic GMBH
Zilex Electronics Inc.
Nova Conductors
Ampacity Inc.
$1.060
Decca Corp
$1.039
$1.028
Corphita
$1.125
AZTECH Wire
$7.240
$6.950
$6.810
$6.680
Perfect Parts
A-Z Elektronik GmbH
Argo Parts USA
Alle Elektronik GmbH
Supply Digital
Continental Prestige Electronics
Assy Fe
Eastek
Aranea Global
Having 2 separate channels allows for independent control or monitoring of different signals or circuits, increasing versatility and customization.
This high maximum forward current capability ensures that the optocoupler can handle a variety of loads and applications safely and effectively.
This optocoupler is specifically designed for AC input signals with transistor output, making it suitable for a wide range of applications where isolation and signal conditioning are required.
With a high maximum operating temperature, this optocoupler is reliable and can withstand demanding operating conditions without compromising performance.
The low minimum operating temperature allows for use in a wide range of environments, ensuring functionality even in colder conditions.
The TIN terminal finish provides good conductivity and corrosion resistance, enhancing the overall reliability and longevity of the optocoupler.
With a low power dissipation level, this optocoupler is energy-efficient and helps to minimize heat generation, improving reliability and longevity.
The high minimum current transfer ratio ensures accurate signal transmission and effective isolation between input and output circuits, enhancing overall performance.
The high maximum isolation voltage provides excellent protection against voltage spikes and ensures reliable signal isolation between input and output circuits.
The surface mount design allows for easy and secure installation on circuit boards, saving space and simplifying assembly processes.
Optocoupler Transistor Outputs ACPL-824-300E attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Broadcom
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
ACPL-824-300E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Packaging - Mult Dev Laser Marking Chg 25/Jan/2018
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
CGA3E2X7R1H104K080AA
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Jiangsu Changjiang Electronics Technology
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Rugao Dachang Electronic
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FOD817B300W
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 110 Cel; Minimum Current Transfer Ratio: 130 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
PS2501L-4-A
California Eastern Laboratories
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .08 A; JESD-609 Code: e6; No. of Elements: 4; Minimum Operating Temperature: -55 Cel;
ILD207T
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -55 Cel; Additional Features: UL APPROVED; Minimum Collector-emitter Breakdown Voltage: 70 V;
SFH6186-5-X001T
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 300 %; Maximum Dark Current: 200 nA; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 55 V; No. of Elements: 1;
MOCD223R2M
MOCD223R2M by Onsemi is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.06A, Darlington output type, and 1000% nominal current transfer ratio. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems and power supplies.
CNY17-3
Broadcom
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.7 V; Maximum Forward Current: .06 A; Maximum Power Dissipation: .15 W;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Dark Current: 100 nA; No. of Elements: 1;
PS2801-4-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; No. of Elements: 4;
PS2811-1-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN/TIN BISMUTH; Nominal Current Transfer Ratio: 200 %; Maximum Dark Current: 100 nA; Configuration: SINGLE; Maximum Isolation Voltage: 2500 V;
GP2S700HCP
Sharp Corporation
Sharp Corporation's GP2S700HCP is a SINGLE optocoupler with max forward current of 0.05A and min operating temp of -25°C. Ideal for applications requiring transistor output optocouplers, with max collector-emitter breakdown voltage of 35V and gold terminal finish.
SFH6156-3-X001T
SFH6156-3-X001T by Infineon is a SINGLE optocoupler with 0.06A forward current, 100% transfer ratio, and 5300V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage of 70V in temperatures ranging from -55 to 100°C.
FODM8801AR2
FODM8801AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. It features a min CTR of 35%, operating temperature range from -40°C to 125°C, and surface mounting feature.
FOD817C300
FOD817C300 by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temp of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a response time of 18μs and collector-emitter breakdown voltage of 70V, it's suitable for through-hole mounting in various electronic circuits.
SFH6186-5
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
HMHAA280R2
The Onsemi HMHAA280R2 is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05 A and operates b/w -55°C to 100°C. With an isolation voltage of 2500 V, it's ideal for applications requiring high voltage protection in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .08 A; Nominal Current Transfer Ratio: 300 %; Configuration: SEPARATE, 4 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
PS2801-4-F3-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA; Maximum Forward Current: .05 A;
SFH6286-3T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Minimum Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A;
TLP291-4(GB-TP,E(T
Toshiba
Toshiba's TLP291-4(GB-TP,E(T) is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.1W, it offers reliable performance in various industrial settings. Its surface mount feature makes installation easy while ensuring optimal functionality.
TCMD1000
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACPL-247-500E
Broadcom's ACPL-247-500E is a 4-channel optocoupler with separate configuration. It offers a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage up to 3000V, such as in power supplies and industrial control systems.
ACPL-217-500E
Broadcom's ACPL-217-500E is a SINGLE optocoupler with 0.05A forward current, 110°C max temp, and 3000V isolation voltage. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-247-560E
Broadcom's ACPL-247-560E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high current transfer ratio and surface mounting feature.
ACPL-217-50BE
ACPL-217-50BE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, min. operating temp -55°C, and max. isolation voltage of 3000V. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-217-56BE
ACPL-217-56BE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with high collector-emitter breakdown voltage and low dark current.
ACPL-217-50AE
Broadcom's ACPL-217-50AE is a SINGLE optocoupler with 0.05A forward current, 80% min CTR, and 3000V isolation voltage. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-227-500E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum On State Current: .05 A;
ACPL-217-50DE
ACPL-217-50DE by Broadcom is a SINGLE optocoupler with 0.05A forward current, 300% min transfer ratio, and 80V min breakdown voltage. Ideal for applications requiring high isolation voltage of 3000V in temperature range -55 to 110°C.
ACPL-244-500E
Broadcom's ACPL-244-500E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation and signal transfer in harsh environments.
ACPL-214-500E
ACPL-214-500E by Broadcom is a SINGLE optocoupler with AC INPUT-TRANSISTOR OUTPUT. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high isolation and signal transfer efficiency in compact designs.
ACPL-217-56CE
ACPL-217-56CE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3000V. With a min. CTR of 200% and max. operating temp of 110°C, it's suitable for surface mount configurations in various electronic devices.
ACPL-217-56AE
ACPL-217-56AE by Broadcom is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3000V. With a min operating temp of -55°C and max temp of 110°C, it offers reliable performance in various environments. Featuring a surface mounting feature, it ensures easy integration into electronic circuits.
ACPL-217-560E
Broadcom's ACPL-217-560E is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with a min C-E breakdown voltage of 80V.
ACPL-217-56DE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 110 Cel; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V;
ACPL-217-50CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -55 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .05 A;
ACPL-227-50BE
Broadcom's ACPL-227-50BE is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high isolation and signal transfer in compact designs.
ACPL-244-560E
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 20 %; No. of Elements: 4;
ACPL-227-56CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.4 V; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 3000 V;
ACPL-227-50CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 110 Cel; Minimum Current Transfer Ratio: 200 %; Maximum On State Current: .05 A;
ACPL-224-500E
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Current Transfer Ratio: 20 %; Maximum On State Current: .05 A; Configuration: SEPARATE, 2 CHANNELS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved