Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACPL-217-56AE by Broadcom is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3000V. With a min operating temp of -55°C and max temp of 110°C, it offers reliable performance in various environments. Featuring a surface mounting feature, it ensures easy integration into electronic circuits.
Median Price
$0.790
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.398
1k+ parts
$0.310
10k+ parts
-
EBV Elektronik
Nova Conductors
$0.235
Bristol Electronics
$0.563
$0.225
Digiode
$0.646
Vyrian
Chip Stock
Sensible Micro Corp
VNN
Cyclops Electronics Ltd
Corohmni
$0.166
Ampacity Inc.
$0.181
Decca Corp
$0.177
$0.176
Semicontronic
Continental Prestige Electronics
$0.230
Argo Parts USA
$0.228
Aztec Data Supply Inc.
$0.590
Corphita
$0.612
Advanced Electronics
$0.758
$0.720
RC Electronics
$0.240
$0.220
$0.210
Perfect Parts
Authorized Procurement Solutions
Eastek
Futuretech Components
Supply Digital
Netroflash
$0.223
$0.219
Kepictronics
This single configuration makes it easy to integrate into various electronic circuits.
With a high maximum forward current, this optocoupler can handle heavy loads without issues.
The transistor output design ensures fast response times and efficient signal transmission.
With a high maximum operating temperature, this optocoupler is suitable for harsh environments.
The low minimum operating temperature allows for reliable performance in cold conditions.
The matte tin finish ensures good solderability and long-lasting connections.
The low power dissipation helps in maintaining the temperature within safe limits.
With a high minimum current transfer ratio, accurate signal transmission is guaranteed.
A low dark current ensures minimal leakage and interference in the output signal.
The high breakdown voltage protects the circuit from voltage spikes and overloads.
The nominal current transfer ratio ensures consistent performance under varying conditions.
The high isolation voltage provides safety in high-voltage applications.
The surface mount design enables easy installation on PCBs, saving space and labor.
A low forward voltage drop minimizes power loss and heat generation.
The high on-state current capacity allows for reliable switching and operation.
Optocoupler Transistor Outputs ACPL-217-56AE attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Broadcom
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
ACPL-217-56AE Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Hi-tron Semiconductor
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Good-ark Electronics
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPI110C
Tt Electronics Plc
OPI110C by Tt Electronics Plc is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.04 A and Max Isolation Voltage of 10 kV. It operates b/w -40 to 85°C, has a Min Current Transfer Ratio of 100%, and is ideal for applications requiring high voltage isolation and signal transmission in harsh environments.
MCT6.SD
Qt Optoelectronics
MCT6.SD by Qt Optoelectronics is a 2-channel optocoupler with separate configuration. It features a min collector-emitter breakdown voltage of 30V, nominal current transfer ratio of 20%, and max isolation voltage of 5300V. Ideal for applications requiring high-voltage isolation and signal transmission in electronic circuits.
PS2801-1-A
Renesas Electronics
PS2801-1-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 100°C, and isolation voltage of 2500V. It's used in applications requiring transistor output optocouplers with high collector-emitter breakdown voltage, low dark current, and nominal current transfer ratio of 80%.
SFH6186-5-X001T
SFH6186-5-X001T by Infineon is a SINGLE optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 300%.
TLP185(GB,SE
Toshiba
Toshiba's TLP185(GB,SE) is a single optocoupler with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V), low dark current (80nA), and surface mounting feature. Operating temp range: -55 to 110°C.
PC817X1NIP1B
Sharp Corporation
Sharp Corporation's PC817X1NIP1B is a SINGLE optocoupler with max. forward current of 0.05A, 160% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring transistor output optocouplers like temperature sensors and power supply control due to its -30 to 100°C operating range and 80V breakdown voltage.
4N25SR2VM
4N25SR2VM by Onsemi is a SINGLE optocoupler with 0.06A forward current, 30V collector-emitter breakdown voltage, and 7500V isolation voltage. Ideal for applications requiring high-voltage signal isolation in temperature range of -55 to 100°C.
HCPL-817-500E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
HMHA2801AR2V
HMHA2801AR2V by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
4N35-X007T
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Dark Current: 50 nA;
MOCD207R2VM
The Onsemi MOCD207R2VM is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temperature range from -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
Broadcom
Broadcom's HCPL-817-500E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. It features a fast response time of 18μs and operates b/w -30°C to 100°C, making it suitable for various surface mount configurations in electronics.
H11G2SR2M
The Onsemi H11G2SR2M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it is ideal for applications requiring high isolation voltage up to 7500V in surface mount configurations.
TLP292-4(LGB-TP,E
Toshiba's TLP292-4(LGB-TP,E is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, min transfer ratio of 100%, and max isolation voltage of 3750V. Ideal for applications requiring high electrical isolation in temperature range -55 to 125°C.
4N35
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Collector-emitter Breakdown Voltage: 30 V; No. of Elements: 1; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V;
PS2801-1-F3-A-N
PS2801-1-F3-A-N by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.05A, collector-emitter breakdown voltage of 80V, and isolation voltage of 2500V. It operates b/w -55°C to 100°C, ideal for applications requiring high voltage isolation like industrial control systems.
TLP521-4GB
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn); Maximum Power Dissipation: .15 W; Packing Method: TUBE; Maximum Operating Temperature: 100 Cel;
TLP187(E(T
Toshiba's TLP187(E(T optocoupler features a Darlington output with built-in diode and resistor. With a max forward current of 0.05A, it offers high collector-emitter breakdown voltage of 300V. Ideal for applications requiring high isolation voltage up to 3750V, operating in temperatures ranging from -55°C to 110°C.
TLP183(BL-TPL,E
Toshiba's TLP183(BL-TPL,E is a TRANSISTOR OUTPUT OPTOCOUPLER with 0.05A max forward current, 3750V isolation voltage, and -55 to 125°C operating temp. Ideal for applications requiring surface mount optoelectronic components with high current transfer ratio of 200%.
CNY173SR2M
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACPL-247-500E
Broadcom's ACPL-247-500E is a 4-channel optocoupler with separate configuration. It offers a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage up to 3000V, such as in power supplies and industrial control systems.
ACPL-217-500E
Broadcom's ACPL-217-500E is a SINGLE optocoupler with 0.05A forward current, 110°C max temp, and 3000V isolation voltage. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-247-560E
Broadcom's ACPL-247-560E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high current transfer ratio and surface mounting feature.
ACPL-217-50BE
ACPL-217-50BE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, min. operating temp -55°C, and max. isolation voltage of 3000V. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-217-56BE
ACPL-217-56BE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with high collector-emitter breakdown voltage and low dark current.
ACPL-217-50AE
Broadcom's ACPL-217-50AE is a SINGLE optocoupler with 0.05A forward current, 80% min CTR, and 3000V isolation voltage. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
ACPL-227-500E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum On State Current: .05 A;
ACPL-217-50DE
ACPL-217-50DE by Broadcom is a SINGLE optocoupler with 0.05A forward current, 300% min transfer ratio, and 80V min breakdown voltage. Ideal for applications requiring high isolation voltage of 3000V in temperature range -55 to 110°C.
ACPL-244-500E
Broadcom's ACPL-244-500E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation and signal transfer in harsh environments.
ACPL-214-500E
ACPL-214-500E by Broadcom is a SINGLE optocoupler with AC INPUT-TRANSISTOR OUTPUT. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high isolation and signal transfer efficiency in compact designs.
ACPL-217-56CE
ACPL-217-56CE by Broadcom is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3000V. With a min. CTR of 200% and max. operating temp of 110°C, it's suitable for surface mount configurations in various electronic devices.
ACPL-217-560E
Broadcom's ACPL-217-560E is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with a min C-E breakdown voltage of 80V.
ACPL-217-56DE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 110 Cel; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V;
ACPL-217-50CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -55 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .05 A;
ACPL-227-50BE
Broadcom's ACPL-227-50BE is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05A, operating temp range from -55 to 110°C, and isolation voltage of 3000V. Ideal for applications requiring high isolation and signal transfer in compact designs.
ACPL-244-560E
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 20 %; No. of Elements: 4;
ACPL-227-56CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.4 V; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 3000 V;
ACPL-227-50CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 110 Cel; Minimum Current Transfer Ratio: 200 %; Maximum On State Current: .05 A;
ACPL-224-500E
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Current Transfer Ratio: 20 %; Maximum On State Current: .05 A; Configuration: SEPARATE, 2 CHANNELS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved