Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-0603F300-2 fuse, rated 32V/3A, with fast blow characteristic. Ideal for circuit protection in electronics. Dimensions: 1.6mm x 0.8mm x 0.45mm, UL standard compliant for surface mount applications.
Median Price
$0.331
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.200
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.630
$0.367
$0.282
$0.231
RS Americas
$0.820
$0.650
DigiKey
$0.880
$0.515
$0.394
$0.300
Avnet
$0.178
Master Electronics
$0.294
$0.270
Verical
$0.346
$0.322
Chip1Stop
Arrow
Maritex
$0.403
$0.298
$0.237
$0.180
ComSIT Distribution GmbH
Electro Sonic
$0.339
$0.317
ComSIT USA
IBS Electronics
$0.427
$0.392
Nova Conductors
Bristol Electronics
Atlantic Semiconductor
Ampacity Inc.
$0.113
Perfect Parts
RC Electronics
Authorized Procurement Solutions
Aranea Global
Allen Electronics Distributors
High joule integral ensures efficient protection against power surges and spikes, making this fuse reliable in safeguarding electronic devices.
Suitable for a wide range of applications requiring a voltage rating of up to 32 volts, providing versatility in use.
With a rated current of 3 amps, this fuse can handle moderate current loads effectively, preventing overheating and circuit damage.
Fast blow characteristic ensures quick response to overcurrent conditions, minimizing the risk of damage to connected equipment.
Capable of operating at high temperatures, making it suitable for applications where temperature variations are common.
Fuses SF-0603F300-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Resistance:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-0603F300-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Excel (Suzhou) Semiconductor
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Wuxi Xuyang Electronic
Yangzhou Yangjie Electronics
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Jiangsu Jiejie Microelectronics
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
CCMR020.TXP
Littelfuse
Littelfuse CCMR020.TXP fuse, rated 20A with 600V AC/500V DC, offers time delay blow characteristic and 200kA breaking capacity. Measuring 10.3mm x 38.1mm, it's ideal for electric circuit protection in various applications like inline mounting systems.
LPJ-60SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
AJT125/400
Mersen S A
Mersen S A's AJT125/400 fuse, rated 125A and 600V, features time lag blow characteristic. With dimensions of 54mm x 181mm, it is a J-class fuse with 200kA breaking capacity. Ideal for electric circuit protection in applications requiring inline mounting and compliance with IEC and UL standards.
KTK-R-25
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
FNQ-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FRN-R-3.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 35 A; Terminal Shape: END CAP;
0452003.MRL
Littelfuse 0452003.MRL fuse, rated at 125V, 3A, with slow blow characteristic and trip time of 0.002s. Nano size for circuit protection in applications requiring a 20.16J nominal joule integral and WRAPAROUND terminal shape. Suitable for surface mount installations with CSA, CUL, UL standards compliance.
0501020.WR
0501020.WR by Littelfuse is a 1206 fuse with 20A rated current, 32V DC voltage, and fast blow characteristic. It has a trip time of 14400s and nominal joule integral of 54.76J. Ideal for circuit protection in electronics due to its small dimensions and high breaking capacity.
KTK-1
Eaton Corporation
The Eaton Corporation's KTK-1 fuse is a 10.3mm x 38.1mm fast-blow electric fuse with a rated voltage of 600V and current of 1A. It has a terminal shape of END CAP, rated breaking capacity of 100kA, and meets CSA and UL standards. Ideal for circuit protection in various applications requiring reliable overcurrent protection.
3413.0114.22
Schurter Ag
Schurter Ag's 3413.0114.22 fuse is a 1206 size with 0.75A rated current and 32V AC voltage, suitable for electric circuit protection in various applications. With a very fast blow characteristic and gold nickel terminal finish, it offers high reliability with a rated breaking capacity of 50A and pre arcing rating of 0.05 A2/s.
TCF90
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 90 A; Terminal Shape: TAB/BLADE;
SR-5-1A-AP
Eaton Corporation's SR-5-1A-AP fuse has a rated current of 1A and nominal joule integral of 7.5J, suitable for circuit protection with a blow characteristic of time delay. With a max operating temperature of 125°C and rated AC voltage of 250V, it is ideal for applications requiring reliable electrical fuse protection in various industries.
C14G40
The Eaton Corporation C14G40 fuse is a 40A electric fuse with a rated AC/DC voltage of 500V. It has a body length/diameter of 14mm and height of 51mm, featuring an end cap terminal shape. With a high breaking capacity of 120kA, it is ideal for inline/holder mounting in various applications requiring reliable circuit protection.
0218.050MXEP
Littelfuse 0218.050MXEP fuse, rated at 250V and 0.05A, features time lag blow characteristic with trip delay of 0.01s. Measuring 5x20mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CE, CSA, KC, SEMKO, UL, VDE standards.
36916300000
Littelfuse 36916300000 TE5 fuse with 6.3A current, 300V AC/DC voltage rating, and 160.74J joule integral is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a trip delay of 20s and operates b/w -40°C to 85°C temperatures, meeting CUL, UL, and VDE standards.
3413.0009.22
The Schurter Ag 3413.0009.22 fuse is a 3.2x1.6mm surface mount device with a rated current of 0.2A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/63V DC. With dimensions of 3.2mm x 1.6mm x 1.6mm and a max operating temperature of 90°C, it meets CUL and UL standards for various applications requiring quick-acting fuses.
FWP-40A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: END CAP;
FRS-R-100
Eaton Corporation's FRS-R-100 fuse, rated at 100A and 600V AC/DC, features a time delay blow characteristic. With a compact body size of 34mm x 200mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
0217002.HXP
0217002.HXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a very fast blow characteristic and is commonly used for circuit protection in applications such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, SEV, UL, and VDE standards.
0FLU.440T
0FLU.440T fuse by Littelfuse is a fast blow electric fuse with a rated current of 0.44A and rated voltage of 1000V, suitable for inline mounting applications. It has a high breaking capacity of 10kA and terminal shape in end cap design, meeting CSA and UL standards for reliable circuit protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
SF-0603SP600-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603FP020F-2
Bourns SF-0603FP020F-2 fuse, rated 0.2A, 35V AC/65V DC, with fast blow characteristic and 0.00142J joule integral. Ideal for circuit protection in electronics applications due to UL standard compliance and compact 1.6mm x 0.81mm x 0.3mm size for surface mounting method.
SF-0603SP600M-2
Bourns SF-0603SP600M-2 fuse, rated 6A with 4J nominal joule integral and 0.001s trip time. Ideal for circuit protection in electronics, featuring surface mounting and 32V DC voltage rating. Measuring 1.6mm x 0.8mm x 0.8mm, it ensures reliable performance from -55°C to 125°C temperatures.
SF-0603F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603S063-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
SF-0603S200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
SF-0603FP150F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
SF-0603FP160-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
SF-0603FP025F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: .25 A; Terminal Shape: WRAPAROUND;
SF-0603S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
SF-0603F150-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-0603S400-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
SF-0603HI150F-2
SF-0603F100-2
Bourns SF-0603F100-2 fuse, 1A rated current, 32V DC voltage, 0.084 ohm resistance. Fast blow characteristic for electric circuit protection in surface mount applications. Dimensions: 1.6mm x 0.8mm x 0.45mm with UL reference standard compliance.
SF-0603F315-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .089 J;
SF-0603SP300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603SP300M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
SF-0603SPA150R-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved