Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-0603F150-2 fuse, rated 1.5A and 32V, features fast blow characteristic with 0.0505 ohm resistance. With dimensions of 1.6mm x 0.8mm x 0.45mm, it is ideal for electric circuit protection in surface mount applications per UL standards.
Median Price
$0.390
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.267
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.470
$0.357
$0.247
$0.218
DigiKey
$0.610
$0.356
$0.272
$0.207
Verical
$0.379
Chip1Stop
$0.290
Farnell
$0.346
$0.344
$0.341
Element14
$0.538
$0.484
Arrow
Electro Sonic
$0.276
$0.251
$0.213
Maritex
$0.403
$0.312
IBS Electronics
$0.933
$0.849
$0.824
$0.387
NAC Semi
$0.521
Nova Conductors
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.227
Advanced Electronics
$15.014
$13.663
$12.311
Kepictronics
RC Electronics
Perfect Parts
Eastek
$0.070
Continental Prestige Electronics
$0.278
$0.264
Aranea Global
This fuse has a high Nominal Joule Integral value, providing excellent protection against joules of energy in case of a power surge.
The small body length/diameter makes this fuse suitable for compact electronic devices where space is limited.
With a high rated voltage, this fuse is capable of handling high voltage applications without the risk of malfunction.
Low resistance ensures efficient flow of current through the fuse, minimizing energy loss and heat generation.
The high rated current capacity allows this fuse to safely manage electrical currents up to 1.5 amps without tripping.
The fast blow characteristic ensures that this fuse will quickly disconnect the circuit in response to overcurrent or short circuit conditions, protecting connected devices.
The surface mount design makes it easy to install and replace this fuse on circuit boards, saving time and effort during assembly or maintenance.
With a high rated breaking capacity, this fuse can safely interrupt fault currents up to 50 amps, protecting the circuit and connected components.
Fuses SF-0603F150-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Resistance:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-0603F150-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
Changzhou Galaxy Century Microelectronics
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Littelfuse
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
KYOCERA AVX
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
3413.0214.22
Schurter Ag
Schurter Ag's 3413.0214.22 fuse, rated at 0.63A and 32V, features a very fast blow characteristic with dimensions of 3.2mm x 1.6mm x 0.6mm. Ideal for circuit protection in electronics, it has a pre-arcing rating of 0.076 A2/s and operates b/w -55°C to 90°C temperatures.
ATDR6
Mersen S A
Mersen S A's ATDR6 fuse, rated 6A with 600V AC & 300V DC voltage, features time delay blow characteristic. Measuring 10.4mm x 38.1mm, it has a rated breaking capacity of 200kA and is ideal for electric circuit protection in various applications.
0451.125MRL
Littelfuse 0451.125MRL is a NANO fuse with 0.125A rated current and 125V DC/AC voltage. It has a very fast blow characteristic, gold terminal finish, and CSA/UL reference standards. Ideal for electric circuit protection in applications requiring surface mounting feature.
KTK-R-2
Eaton Corporation
The Eaton Corporation's KTK-R-2 fuse, rated at 2A and 600V, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for circuit protection, it has a rated breaking capacity of 200kA and is suitable for inline/holder mounting in various applications compliant with CE, CSA, and UL standards.
021802.5MXP
021802.5MXP fuse by Littelfuse is a 2.5A electric fuse with a rated AC voltage of 250V and trip time of 0.02s, suitable for circuit protection applications. With a blow characteristic of time lag and rated breaking capacity of 35A, it operates within a temperature range of -55°C to 125°C. This compact fuse, sized at 5x20mm, features nickel terminal finish and is compliant with various international standards like CCC, CE, UL, and VDE.
FNQ-R-2-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
213.5
213.5 fuse by Littelfuse is a time lag electric fuse with a rated current of 0.5A and rated AC voltage of 250V. With dimensions of 5.2mm x 20mm, it has a nominal joule integral of 2.9J and can operate b/w -55°C to 125°C. This fuse is commonly used for circuit protection in various applications due to its high breaking capacity of 100A and compliance with standards such as CCC, CE, CSA, IEC, SEMKO, and UL.
FWP-32A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 32 A; Terminal Shape: END CAP;
0313.600HXP
The Littelfuse 0313.600HXP is a 3AG fuse with a rated current of 0.6 A and a max operating temperature of 125°C. It has a time lag blow characteristic and is commonly used for circuit protection in applications such as inline holders.
FRN-R-35
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 35 A; Terminal Shape: END CAP;
SR-5-100MA-BK
Eaton Corporation's SR-5-100MA-BK fuse has a rated current of 0.1A and nominal joule integral of 0.015155J, suitable for circuit protection at 250V AC. With a time delay blow characteristic and rated breaking capacity of 35A, it is ideal for applications requiring electric fuse protection in temperatures ranging from -40°C to 125°C.
ANL-250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE;
ANN-50
Eaton Corporation's ANN-50 fuse, with 125V AC and 80V DC voltage ratings, offers a very fast blow characteristic and 2500A breaking capacity. Measuring 81mm x 22.2mm, it features TAB/BLADE terminals for surface mount applications, providing reliable circuit protection with built-in indicator feature.
FNQ-R-1
Eaton Corporation's FNQ-R-1 fuse, rated at 1A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for circuit protection in various applications requiring a rated breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it can be mounted inline or in a holder for efficient use.
JJS-40
The Eaton Corporation JJS-40 fuse, with a rated current of 40A and very fast blow characteristic, is ideal for circuit protection in applications requiring a 600V AC voltage. Measuring 20.6mm x 39.7mm, it features an end cap terminal shape and inline/holder mounting feature, meeting CE, CSA, and UL standards for reliable performance with a high breaking capacity of 200kA.
0216002.MXP
Littelfuse 0216002.MXP fuse, rated at 2A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
LP-CC-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
04511.60MRL
Littelfuse 04511.60MRL fuse has a rated current of 1.6A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/DC. With dimensions of 6.1mm x 2.69mm x 2.69mm, it is designed for surface mount applications with gold terminal finish and CSA/PSE/UL standards compliance.
0259001T
Littelfuse 0259001T fuse has a rated current of 1A and nominal joule integral of 0.01J. With a rated AC voltage of 125V, it is ideal for circuit protection in applications requiring electric fuses. This through-hole mounted fuse operates b/w -55°C to 90°C, with a rated breaking capacity of 50A.
ATDR3-2/10
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
SF-0603SP600-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603FP020F-2
Bourns SF-0603FP020F-2 fuse, rated 0.2A, 35V AC/65V DC, with fast blow characteristic and 0.00142J joule integral. Ideal for circuit protection in electronics applications due to UL standard compliance and compact 1.6mm x 0.81mm x 0.3mm size for surface mounting method.
SF-0603SP600M-2
Bourns SF-0603SP600M-2 fuse, rated 6A with 4J nominal joule integral and 0.001s trip time. Ideal for circuit protection in electronics, featuring surface mounting and 32V DC voltage rating. Measuring 1.6mm x 0.8mm x 0.8mm, it ensures reliable performance from -55°C to 125°C temperatures.
SF-0603F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603S063-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
SF-0603S200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
SF-0603FP150F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
SF-0603FP160-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
SF-0603FP025F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: .25 A; Terminal Shape: WRAPAROUND;
SF-0603S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
SF-0603S400-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
SF-0603HI150F-2
SF-0603F100-2
Bourns SF-0603F100-2 fuse, 1A rated current, 32V DC voltage, 0.084 ohm resistance. Fast blow characteristic for electric circuit protection in surface mount applications. Dimensions: 1.6mm x 0.8mm x 0.45mm with UL reference standard compliance.
SF-0603F315-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .089 J;
SF-0603SP300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603SP300M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
SF-0603SPA150R-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-0603F125-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved