Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MH1608-221Y is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite construction, it offers 220 ohm output impedance and operates b/w -55°C to 125°C. Ideal for applications requiring noise suppression in data lines up to 100MHz frequency.
Median Price
$0.022
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.068
100+ parts
$0.033
1k+ parts
$0.025
10k+ parts
-
DigiKey
$0.100
$0.049
Mouser Electronics
$0.052
$0.035
Newark
$0.103
Arrow
$0.018
Verical
Master Electronics
$0.021
TTI Europe
TTI
Chip1Stop
Distrelec
Element14
$0.039
$0.038
Nova Conductors
$0.027
TME
$0.060
$0.045
$0.030
$0.026
Maritex
$0.064
Electro Sonic
$0.023
IBS Electronics
Vyrian
Manoshevitz Elec. Sales
NAC Semi
Chip Stock
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Martec Srl
Prism Electronics
Semicontronic
$0.015
Ampacity Inc.
$0.016
Corohmni
$0.029
Aztec Data Supply Inc.
$2.728
Speed Components Ltd (Excess)
Abacus Technologies
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
$0.031
Netroflash
High minimum insulation resistance ensures reliable performance and reduces the risk of electrical faults.
Chip bead construction provides compact size and efficient filtering capabilities.
Having 2 terminals allows for easy and secure connection in a circuit.
0603 case code indicates standardized dimensions for compatibility with various surface mount applications.
Ferrite chip filters are known for their high-frequency noise suppression and interference mitigation.
High maximum operating temperature ensures reliable performance in a wide range of conditions.
Low minimum operating temperature allows for use in extreme cold environments.
Matte tin over nickel finish provides excellent conductivity and corrosion resistance.
Compact width allows for easy integration into tight spaces.
Effective filtering at minimum frequency ensures interference reduction in high-frequency applications.
Low maximum DC resistance ensures minimal power loss and efficient filtering.
Standard length for compatibility with various surface mount applications.
Effective filtering at maximum frequency ensures interference reduction in high-frequency applications.
Output impedance of 220 ohm allows for effective noise suppression and signal integrity.
Tape and reel packaging provides convenience for automated assembly processes.
Surface mount allows for easy integration onto circuit boards for compact designs.
Standard dimensions for compatibility with various surface mount applications.
Rated current of 2 A allows for efficient power handling and reliable performance.
Low height ensures minimal space consumption and compatibility with compact designs.
Ferrite material provides excellent noise suppression and interference mitigation capabilities.
Data Line Filters MH1608-221Y attributes and parameters. Explore more Data Line Filters devices from Bourns
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MH1608-221Y Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - MH1608, MH2029, MH3261, MZ2029 Manufacturing Dec/2017
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Taiwan Semiconductor
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Meritek Electronics
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NUF4220MNT1G
NUF4220MNT1G by Onsemi is a Data Line Filter with 4 functions and 8 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 1.1 ohm, and offers a capacitance of 205 uF. This surface mount filter is ideal for applications requiring data line filtering in compact spaces.
7427927311
Wuerth Elektronik & Kg
Wurth Elektronik 7427927311 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.09 ohm DC resistance. Ideal for surface mount applications, it measures L1.0xB0.5xH0.5 mm and handles a rated current of 1.2A while providing an output impedance of 120 OHM.
BLM31PG601SN1K
Murata Manufacturing
BLM31PG601SN1K by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. This ferrite chip filter comes in a compact 1206 case size for surface mounting method.
74279265
Wurth Elektronik 74279265 is a 0603 multi-layer FERRITE CHIP filter with dimensions of L1.6xB0.8xH0.8 mm. It has a max operating temp of 125°C, min freq of 100 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mounting type and ferrite material construction.
ILHB0603ER600V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);
MPZ1608S601ATA00
TDK
TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
PCMF2HDMI2SZ
Nexperia
Nexperia's PCMF2HDMI2SZ is a 5V data line filter with 2 functions and 10 terminals. It operates b/w -40°C to 85°C, with dimensions of L1.62xB1.22xH0.6 mm. Ideal for applications requiring IEC approvals, such as HDMI signal filtering in compact electronic devices.
BKP1005HS221-TV
Taiyo Yuden
Taiyo Yuden's BKP1005HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.0XB0.5XH0.5 (mm), it offers an output impedance of 220 OHM and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications due to its compact size and high resistance capabilities.
BLM21PG331SH1D
BLM21PG331SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.09 ohm, output impedance of 330 OHM, and rated current of 1.5 A. Ideal for data line filtering applications at frequencies ranging from 100 MHz with surface mounting type.
BLM18KG300TN1D
Murata Manufacturing's BLM18KG300TN1D is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has a DC resistance of 0.01 ohm and output impedance of 30 ohm.
744232102
Wurth Elektronik 744232102 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, DC resistance of 1 ohm, and output impedance of 1000 ohm. Ideal for applications requiring noise filtering in data lines with a current rating of 0.23A.
YFF31AH2A105MT0Y0N
YFF31AH2A105MT0Y0N by TDK is a data line filter with 100 V rated voltage, 4 A rated current, and 1000000 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 screening level and compact dimensions of 1.6mm x 3.2mm x 1.3mm for surface mount installation.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
D-08C2A
The KEMET Corporation D-08C2A is a data line filter with 4 functions, rated at 50V and 0.5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25 to 65°C. With dimensions of L21.0xB16.0xH14.0 mm, it is ideal for applications requiring noise filtering in electronic circuits.
BLM18HD601SN1D
Murata Manufacturing's BLM18HD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and can handle frequencies from 100MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 1.5Ω and rated current of 0.1A, making it suitable for noise suppression in electronic circuits.
BLM18PG221SN1D
Murata Manufacturing's BLM18PG221SN1D is a chip bead data line filter with 2 terminals, dimensions of 1.6x0.8x0.8mm, and output impedance of 220 ohm. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and rated current of 1.4A. Ideal for surface mount applications in filtering frequencies from 100 MHz with ferrite material construction.
FBMH1608HM601-TV
Taiyo Yuden's FBMH1608HM601-TV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 0.9A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 600 ohm output impedance and operates b/w -40 to 125°C. Ideal for surface mount applications in various electronic devices requiring noise suppression.
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
742792603
Wurth Elektronik 742792603 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions of L1.6xB0.8xH0.8 mm and rated current of 4A, ideal for noise suppression in electronic circuits.
BLM15HB121SN1D
BLM15HB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines, with dimensions of L1.0XB0.5XH0.5 (mm) and a rated current of 0.3 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MH1608-601Y
Bourns
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
MH1608-301Y
Bourns MH1608-301Y is a chip bead data line filter with 0.2 Mohm insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for surface mount applications in electronics to reduce electromagnetic interference on data lines.
MH1608-471Y
MH1608-100Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
MH1608-600Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .04 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
MH1608-101Y
MH1608-300Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .06 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
MH1608-121Y
The Bourns MH1608-121Y is a chip bead data line filter with 2 terminals, rated for 2A current. It offers a min insulation resistance of 0.1 Mohm and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies up to 100 MHz.
MH1608-151Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
MH1608-800Y
MH1608-181Y
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; No. of Functions: 1; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved