Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MH1608-121Y is a chip bead data line filter with 2 terminals, rated for 2A current. It offers a min insulation resistance of 0.1 Mohm and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies up to 100 MHz.
Median Price
$0.032
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.087
100+ parts
$0.076
1k+ parts
$0.043
10k+ parts
$0.033
Mouser Electronics
$0.100
$0.052
$0.035
$0.025
DigiKey
$0.051
-
Newark
$0.030
TTI
$0.023
Master Electronics
$0.022
Verical
$0.026
Chip1Stop
$0.018
Element14
$0.039
$0.028
$0.020
Farnell
$0.040
Arrow
Avnet
Nova Conductors
TME
$0.090
$0.049
Electro Sonic
IBS Electronics
$0.031
Vyrian
Prism Electronics
Resion
Ampacity Inc.
$0.014
Aranea Global
$0.024
Perfect Parts
Continental Prestige Electronics
$0.015
Authorized Procurement Solutions
EMSNET (Excess)
This high insulation resistance ensures reliable performance and prevents electrical leakage.
The chip bead construction provides compact size and efficient filtering capabilities.
With two terminals, this filter is easy to install and securely connect in the circuit.
The 0603 case code indicates a standardized size for easy integration into various electronic devices.
The ferrite chip filter type offers effective noise suppression and interference reduction.
With a high maximum operating temperature, this filter can withstand demanding conditions.
The low minimum operating temperature allows for reliable performance even in harsh environments.
The matte tin finish over nickel terminals provides excellent conductivity and corrosion resistance.
The narrow width of 0.8mm makes this filter suitable for applications with space constraints.
The minimum frequency of 100 MHz allows this filter to effectively filter out high-frequency noise.
With a low maximum DC resistance of 0.1 ohm, this filter minimizes power loss in the circuit.
The length of 1.6mm adds to the compact design of this filter for easy integration.
The maximum frequency of 100 MHz ensures efficient filtering of high-frequency noise.
The output impedance of 120 ohms helps maintain signal integrity and reduce interference.
The TR packaging method in a 7-inch reel facilitates easy handling and storage.
This filter can be easily mounted on the surface of a PCB, saving space and simplifying installation.
These compact dimensions make this filter suitable for small electronic devices.
With a rated current of 2A, this filter is capable of handling moderate power loads.
The low height of 0.8mm adds to the slim profile of this filter for space-saving applications.
The ferrite material used in this filter provides high magnetic permeability for effective noise suppression.
Data Line Filters MH1608-121Y attributes and parameters. Explore more Data Line Filters devices from Bourns
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MH1608-121Y Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - MH1608, MH2029, MH3261, MZ2029 Manufacturing Dec/2017
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
First Components International
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Vishay Telefunken
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BLM15HG102SN1D
Murata Manufacturing
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
742792651
Wuerth Elektronik & Kg
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
BLM18AG102SN1J
Murata Manufacturing's BLM18AG102SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.5 ohm, and output impedance of 1000 OHM. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM41PG750SN1L
Murata Manufacturing's BLM41PG750SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.025 ohm and output impedance of 75 OHM at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring high-frequency filtering.
MPZ1608B471ATD25
TDK
MPZ1608B471ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring a 470 OHM output impedance in surface mount configurations up to 1A rated current.
742792117
Wurth Elektronik 742792117 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max frequency of 600 MHz, DC resistance of 0.005 ohm, and output impedance of 48 OHM. Ideal for data line filtering applications due to its rated current of 6 A and surface mounting type.
HI1206T500R-10
Laird Technologies
HI1206T500R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -40 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 50 OHM. Ideal for applications requiring surface mount filters in the frequency range of 25-1000 MHz.
BNX022-01B
Murata Manufacturing's BNX022-01B is a 50V data line filter with 35dB attenuation at 1000MHz. With dimensions of L12.1xB9.1xH3.1mm, it operates b/w -40 to 125°C and has an output impedance of 50Ω. Ideal for applications requiring high insulation resistance and rated current up to 10A in surface mount configurations.
BLM21AH102SN1D
Murata Manufacturing's BLM21AH102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 85°C, offering a DC resistance of 0.45 ohm and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high impedance characteristics.
742792035
Wurth Elektronik 742792035 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it is designed for surface mount installation in electronic devices up to 220 MHz frequency range.
BLM15BB221SN1D
Murata Manufacturing's BLM15BB221SN1D is a chip bead data line filter with 2 terminals, rated current of 0.2A, and output impedance of 220 ohm. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm.
EMIF04-1005M8
STMicroelectronics' EMIF04-1005M8 is a 4-function data line filter with approvals from UL and IEC. It has a rated voltage of 10V, max operating temperature of 85°C, and capacitance of 52uF. Ideal for surface mount applications requiring filtering in data lines with dimensions L1.7xB1.5xH0.6mm.
MMZ2012Y202BTD25
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
DSS1NB32A103Q91A
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
TLC/0.1A-101M-00
Fastron Electronics
The Fastron Electronics TLC/0.1A-101M-00 is a Data Line Filter with 100uH inductance, 0.94 ohm max DC resistance, and 0.1A rated current. It operates b/w -55°C to 115°C and has AEC-Q200 & MIL-STD-202G approvals. Ideal for applications requiring noise suppression in data transmission lines.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MH1608-601Y
Bourns
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
MH1608-221Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
MH1608-301Y
Bourns MH1608-301Y is a chip bead data line filter with 0.2 Mohm insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for surface mount applications in electronics to reduce electromagnetic interference on data lines.
MH1608-471Y
MH1608-800Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .04 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
MH1608-600Y
MH1608-101Y
MH1608-100Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
MH1608-300Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .06 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
MH1608-151Y
MH1608-181Y
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; No. of Functions: 1; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved