Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Resistance: 47000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %; Package Style (Meter): SIP;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays 4309R-101-473DLF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Construction:
JESD-609 Code:
Length (Lead):
Spacing (Lead):
Network Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Series:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Tolerance:
Operating Voltage:
4309R-101-473DLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Hitano Enterprise
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Nte Electronics
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
4116R-1-182
Bourns 4116R-1-182 resistor network features 1800 ohm resistance, 2.54 mm lead spacing, and 0.25 W power dissipation. Ideal for applications requiring precise resistance values in a compact DIP package with isolated network type.
RM3216B103/603PBVW10
Thin Film Technology
RM3216B103/603PBVW10 by Thin Film Technology is a 2-function resistor array with 10000 ohm and 60000 ohm resistances. It has a power dissipation of 0.063 W, tolerance of 0.1%, and temperature coefficient tracking of 5 ppm/°C. Ideal for applications requiring isolated network type resistors in surface mount packages.
RP164PJ200CS
Samsung Electro-mechanics
Samsung Electro-mechanics RP164PJ200CS is a 20 ohm resistor network with 4 functions, METAL GLAZE/THICK FILM tech, and 5% tolerance. Ideal for SMT mounting in applications requiring isolated networks with operating voltage up to 50V and temp range of -55 to 155 °C.
CAY16-332J4LF
The Bourns CAY16-332J4LF is a resistor network with 4 functions, each with a resistance of 3300 ohm and a tolerance of 5%. It has a power dissipation of 0.0625 W and operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits requiring precise resistance values.
4608X-102-471LF
Bourns 4608X-102-471LF resistor network features 470 ohm resistance, 2% tolerance, and 0.3 W power dissipation. Ideal for applications requiring isolated networks with 4 functions in a rectangular SIP package. Operating voltage up to 100 V and temperature range from -55 to 125 °C make it versatile for various electronic designs.
742C083681JP
Cts
The Cts 742C083681JP resistor network has a power dissipation of 0.063W, resistance of 680 ohm, and operates at temperatures b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and isolated network type.
CAT16-182J4LF
CAT16-182J4LF by Bourns is a resistor network with 1800 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics due to its isolated network type and operating voltage of 50 V.
LT5400BCMS8E-6#PBF
Analog Devices
LT5400BCMS8E-6#PBF by Analog Devices is a 4-function isolated resistor network with 8 terminals. It offers precise tracking at 1 ppm/°C temperature coefficient, ideal for applications requiring high accuracy such as precision instrumentation and sensor calibration. With a power dissipation of 0.8 W and operating voltage of 75 V, it operates b/w -40 to 85 °C temperatures.
LT5400ACMS8E-1#TRPBF
Linear Technology
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
Y5076V0029AA0L
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: .05 %;
GUS-QSCBLF-012701-JD
Tt Electronics Plc
GUS-QSCBLF-012701-JD by Tt Electronics Plc is a miniature resistor network with 2700 ohm resistance, 24 terminals, and 5% tolerance. It operates at -55 to 125 °C and has a power dissipation of 0.05 W. Ideal for applications requiring compact SMT packages with bussed network type.
MNR35J5RJ103
ROHM
ROHM's MNR35J5RJ103 resistor network features 8 elements with 10000 ohm resistance each. With a power dissipation of 0.063 W and operating voltage of 50 V, it is ideal for surface mount applications in various electronic circuits. The metal glaze/thick film technology ensures stable performance in temperatures ranging from -55 to 125 °C.
4608X-102-101LF
Bourns 4608X-102-101LF resistor network features 100 ohm resistance, 2% tolerance, and 0.3 W power dissipation. Ideal for through-hole mounting applications in electronics requiring precise resistance values and high reliability. With a temperature coefficient of 50 ppm/°C, it ensures stable performance across a wide operating temperature range from -55 to 125 °C.
Y4485V0001QT9R
ARRAY/NETWORK RESISTOR; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: .02 %; No. of Terminals: 3;
4608X-102-472LF
Bourns 4608X-102-472LF is a resistor network with 4700 ohm resistance, 2% tolerance, and 0.3 W power dissipation. Ideal for applications requiring isolated networks in through-hole mounting with operating voltage up to 100 V.
MPMT10019001AT1
Vishay Intertechnology
Vishay Intertechnology's MPMT10019001AT1 is a thin film resistor array with 0.1W power dissipation, 70°C rated temperature, and 2 ppm/°C temperature coefficient tracking. Ideal for divider applications in electronics, it features a SOT-23 package style, surface mounting type, and operates at voltages up to 100V.
CN1E4TTD470J
Koa Speer Electronics
Koa Speer Electronics CN1E4TTD470J is a 47 ohm resistor network with 8 terminals, 0.063 W power dissipation, and 5% tolerance. Ideal for surface mount applications in electronics requiring isolated network type resistors with operating voltage up to 25 V. Suitable for temperature-sensitive environments with a wide range from -55 to 125 °C.
YC164-FR-07100RL
Yageo
YC164-FR-07100RL by Yageo is a 100 ohm resistor network with 4 functions, METAL GLAZE/THICK FILM tech, and 1% tolerance. Ideal for AEC-Q200 applications due to its -55 to 155 °C operating range, 50V voltage rating, and 0.0625W power dissipation in a compact SMT package.
4816P-002-821
Bourns 4816P-002-821 is a resistor network with 15 elements, each having 820 ohm resistance. It features a power dissipation of 0.08W and operates b/w -55 to 125°C. Ideal for applications requiring precise resistance values in compact SMT packages.
766163104GPTR7
The Cts 766163104GPTR7 is a resistor network with a power dissipation of 0.16W and resistance of 100k ohm. It is commonly used in surface mount applications for its compact size (9.9mm x 3.9mm) and high operating temperature range (-55°C to 125°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved