Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3314J-1-501E is a CERMET variable resistor with 500 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 300V. With a temperature range from -55°C to 125°C, it offers precise control over a wide range of temperatures.
Median Price
$1.026
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Newark
1+ parts
$1.260
100+ parts
$0.897
1k+ parts
$0.837
10k+ parts
-
Mouser Electronics
$1.500
$1.100
$0.875
$0.737
DigiKey
$1.570
$1.092
$0.905
$0.781
Distrelec
$1.644
$1.417
$1.157
Bürklin Elektronik
$1.720
$1.350
$1.160
Chip1Stop
$0.750
$0.733
Master Electronics
$0.723
$0.688
Verical
$0.851
$0.818
Arrow
$0.853
$0.754
Avnet
$0.742
TTI Europe
$0.963
$0.854
TTI
$1.090
$0.704
Nova Conductors
$1.074
Electro Sonic
$0.821
$0.732
Chip Stock
IBS Electronics
$1.014
$0.965
Vyrian
NAC Semi
$1.290
$1.190
Bristol Electronics
$0.960
$0.538
$0.507
LIBRA Elektronik GmbH
Speed Components Ltd
Pegasus Components GmbH
SPM Sales
PC Components Company LLC
A&K Electronics
Component Sense
Rotakorn
Sea View Technologies
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Florida Circuit
Prism Electronics
ComSIT Distribution GmbH
ABC Electronics Ltd.
EMSNET
Dark Horse Electronics
Diverse Electronics
Zilex Electronics Inc.
Holdelec - ElecDif-Pro
Q Components
Mil-Aero Solutions, Inc.
Inland Empire Components Inc.
Resion
Micros
$1.045
$1.020
Partservice
$1.046
$1.021
Micros sp.j. W. Kędra i J. Lic
$1.120
$1.094
Elcom Components
Lantek
Electronic Expediters
Aztec Data Supply Inc.
$0.270
Corohmni
$0.496
Semicontronic
$0.640
$0.624
$0.621
Argo Parts USA
$0.999
Netroflash
$1.053
Metaverse IC Inc.
GreenTree Electronics
Abacus Technologies
iodParts Technologies Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Assy Fe
SIE Connect GmbH (Excess)
Continental Prestige Electronics
$0.676
$0.576
Kepictronics
Suitable for use in various electronic applications within normal operating temperature range.
Provides a standard design for easy integration with existing circuit boards or assemblies.
Offers a specific level of resistance for fine-tuning or adjusting circuits as needed.
Capable of handling higher voltages, making it versatile for different applications.
Provides flexibility in the precise resistance value required for a given circuit.
Enables easy installation on circuit boards without the need for additional hardware.
Able to handle a moderate amount of power without overheating, ensuring reliability.
Variable Resistors 3314J-1-501E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3314J-1-501E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Temic Semiconductors
Yageo
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Rugao Dachang Electronic
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Weitron Technology
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
3296X-1-503LF
Bourns
Bourns 3296X-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
93PR10KLF
Tt Electronics Plc
93PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, 1W power dissipation, and 10% tolerance. It is used in PCB mounting applications for temperature-sensitive circuits due to its linear law of resistance and wide operating temperature range (-55 to 125 °C).
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
T93YA103KT20
Vishay Intertechnology
Vishay Intertechnology's T93YA103KT20 is a 10000 ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a screw actuator, matte tin terminal finish, and can handle up to 0.5 W power dissipation.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3352T-1-104LF
Bourns 3352T-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 20% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications requiring linear resistance law in temperatures ranging from -55 to 125 °C.
67PR100KLFTB
67PR100KLFTB by Tt Electronics Plc is a 20-turn linear trimmer resistor with CERMET technology. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
380C31000
Honeywell Sensing And Control
380C31000 by Honeywell is a linear potentiometer with 1000 ohm resistance, 10% tolerance, and 2W power dissipation. It features a conductive plastic technology in a circular package for horizontal actuator orientation. Ideal for panel mounting applications with temperature range from -55 to 120 °C.
PVZ3A104C01B00
Murata Manufacturing
Murata Manufacturing's PVZ3A104C01B00 is a 100k ohm linear trimmer resistor with 30% tolerance, suitable for surface mount applications. It operates b/w -25°C to 85°C, with a temperature coefficient of 500 ppm/°C and max voltage of 50V. The rectangular package measures 3.2mm x 3.1mm x 1.85mm, featuring a screw actuator and gold terminal finish for precise resistance adjustments up to 230° rotation angle.
3306F-1-503
Bourns 3306F-1-503 is a CERMET trimmer resistor with 50k ohm resistance, 25% tolerance, and 0.2W power dissipation. It is used in PCB mounting applications for voltage control circuits due to its linear resistance law and 215° rotation angle.
3006P-7-202LF
Bourns 3006P-7-202LF is a linear trimmer pot with 2000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
3290W-1-103
Bourns 3290W-1-103 is a 10000 ohm trimmer resistor with 25 turns, linear resistance law, and 5% tolerance. It has a rated power dissipation of 1W and operates b/w -65 to 150 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
93PR50KLF
93PR50KLF by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, suitable for PCB mounting. It features a linear law of resistance, thumb wheel actuator type, and can operate b/w -55 to 125 °C temperatures. Ideal for applications requiring precise voltage adjustments in electronic circuits.
27ESB103MMF50NF
TE Connectivity
TE Connectivity's 27ESB103MMF50NF is a 10000 ohm logarithmic carbon film potentiometer with a tolerance of 20%. Featuring a circular package, it has a rated power dissipation of 0.4W and is designed for through hole mounting applications.
P0925N-FC15CR500K
P0925N-FC15CR500K by Tt Electronics Plc is a vertical variable resistor with conductive plastic technology. It has 6 terminals, INVERSE AUDIO resistance law, and 20% tolerance. Ideal for audio equipment due to its SHAFT actuator type and 300° rotation angle.
3543S-1-202L
Bourns 3543S-1-202L is a 2000 ohm linear wire wound potentiometer with 3 turns, 5% tolerance, and 1W power dissipation. It has a circular package with a diameter of 22.23mm and length of 19.05mm, suitable for chassis mount applications in various electronic devices operating b/w -40°C to +125°C.
3314J-1-504E
Bourns 3314J-1-504E is a CERMET variable resistor with 500000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 300V. Features screw actuator, 210° rotation angle, and compact SMT package.
3296W-1-473LF
Bourns 3296W-1-473LF is a linear trimmer resistor with 47000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has 25 turns and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
23ESA103MMF50NF
TE Connectivity's 23ESA103MMF50NF is a linear carbon film potentiometer with 10000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It has a circular package shape, horizontal actuator orientation, and through hole mount for applications in electronic circuits requiring precise resistance adjustments.
TS53YL103MR10
Vishay Intertechnology's TS53YL103MR10 is a CERMET variable resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in applications requiring precise voltage adjustments due to its linear law of resistance and screw actuator type for easy adjustment. Suitable for surface mounting with a temperature coefficient of 100 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3314J-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-103E
Bourns 3314G-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and 300 V operating voltage capability.
3314J-1-502E
Bourns 3314J-1-502E is a CERMET variable resistor with 5000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314G-1-202E
Bourns 3314G-1-202E is a CERMET variable resistor with 2000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 300V.
3314J-1-104E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-104E
3314J-2-103E
3314G-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-501E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-101E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-203E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-204E
Bourns 3314J-1-204E is a CERMET trimmer resistor with 200k ohm resistance, 20% tolerance, and 0.25W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and 300V operating voltage capability.
3314J-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314J-1-203E
3314G-1-503E
3314J-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-103G
3314J-1-501G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved