Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3314J-1-201E is a CERMET variable resistor with 200 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
Median Price
$1.570
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Distrelec
1+ parts
$1.256
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$1.092
$1.013
Mouser Electronics
$1.100
$0.857
$0.755
Farnell
$1.670
$0.833
$0.816
Newark
$1.700
$1.230
Bürklin Elektronik
$1.720
$1.350
$1.160
RS Americas
$1.850
$1.480
$1.200
TTI Europe
$0.983
$0.863
Master Electronics
$0.647
$0.612
Verical
$0.750
Element14
$1.371
$1.349
Nova Conductors
$1.061
Component Electronics Inc.
$1.540
$1.150
$1.000
Chip Stock
Bristol Electronics
Sea View Technologies
Semi Source
Electro Sonic
$1.009
$0.852
IBS Electronics
$0.827
$0.771
Vyrian
Global Solutions Electronics Company
Lantek
ComSIT Distribution GmbH
Mil-Aero Solutions, Inc.
Connect4Technologies Inc.
First Choice Components Inc.
SPM Sales
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
Flex Direct, LLC
Sunrise Surplus Inc.
Corohmni
$0.097
Argo Parts USA
Netroflash
$1.008
$0.987
Continental Prestige Electronics
$1.660
$1.030
Allen Electronics Distributors
$1.810
$1.750
$1.650
Kepictronics
Perfect Parts
Authorized Procurement Solutions
iodParts Technologies Inc.
$0.417
Assy Fe
RTC Component Inc.
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
With a high rated temperature of 70 °C, this variable resistor is suitable for use in a wide range of operating conditions.
The specific resistance value of 200 ohm allows for precise adjustments to be made, making this variable resistor ideal for fine tuning electrical circuits.
With a high operating voltage of 300 V, this variable resistor can handle a wide range of electrical loads without risk of damage.
The 20% tolerance ensures that the resistance value of this variable resistor remains within an acceptable range, providing reliable performance.
The surface mount design of this variable resistor allows for easy and secure installation on circuit boards, saving space and simplifying assembly.
Variable Resistors 3314J-1-201E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3314J-1-201E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Shandong Yiguang Electronic Joint Stock
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
89PR10KLF
Tt Electronics Plc
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
RS60112A600U
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Type (Actuator): SLIDE;
23ESA102MMF50NF
TE Connectivity
TE Connectivity's 23ESA102MMF50NF is a 1000 ohm linear carbon film potentiometer with 3 terminals and a circular package. It has a tolerance of 20% and rated power dissipation of 0.4W, suitable for applications requiring precise resistance adjustment in horizontal orientation.
3296W-1-471LF
Bourns
TRIMMER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
CMU1511E
Ohmite Manufacturing
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
67WR200KLFTB
67WR200KLFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications with a max operating temperature of 125°C and an operating voltage of 200V. Ideal for precision adjustments in electronic circuits requiring a trimmer resistor with a tolerance of 10%.
RK1631210AX9
Alps Alpine
Alps Alpine RK1631210AX9 is a 10000 ohm linear potentiometer with 6 terminals. It has a 300° rotation angle, operates at 5V voltage, and offers a tolerance of 20%. Ideal for applications requiring precise resistance adjustment in PCB mount setups.
3382G-1-103G
Bourns 3382G-1-103G is a linear potentiometer with 10000 ohm resistance, 30% tolerance, and 0.05 W power dissipation. It has a vertical actuator orientation and gull wing terminal shape. Ideal for applications requiring precise voltage control in electronic circuits.
PT10MV10-104A2020-S
Piher Sensors And Controls Sa
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3314G-1-503E
Bourns 3314G-1-503E is a CERMET variable resistor with 50000 ohm resistance, 20% tolerance, and 210° rotation angle. It is used in applications requiring linear law of resistance, such as automotive electronics for AEC-Q200 compliance.
3224W-1-202E
The Bourns 3224W-1-202E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohm, rated power dissipation of 0.25 W, and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
3006P-7-501LF
The Bourns 3006P-7-501LF is a linear trimmer pot with 500 ohm resistance, rated for 0.75W power dissipation and 10% tolerance. It features CERMET technology, operates b/w -55 to 125 °C, and has a max voltage of 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
D25K400E
The Ohmite D25K400E is a 400 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 25W and can operate at temperatures up to 350°C. Ideal for chassis mount applications requiring precise voltage control in high-temperature environments.
3299Y-1-103LF
Bourns 3299Y-1-103LF is a CERMET trimmer pot with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a linear law of resistance. Its screw actuator allows for precise adjustments in various electronic circuits.
RV4LAYSA102A
Ohmite Manufacturing's RV4LAYSA102A is a 1000 ohm linear carbon potentiometer with 3 terminals. Featuring a rated power dissipation of 2W, it has an operating temperature range from -55 to 120°C. Ideal for chassis mount applications, its screw actuator allows for precise adjustments in various electronic circuits.
3005P-1-202
Bourns 3005P-1-202 is a 2000 ohm linear trimmer resistor with 20 turns and 10% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 125 °C, and offers precise resistance adjustment for PCB mounting applications.
RV4NAYSD252A
Honeywell Sensing And Control
RV4NAYSD252A by Honeywell is a 2500 ohm linear potentiometer with 3 lug terminals. It has a 10% tolerance, operates b/w -55 to 120 °C, and dissipates up to 2W power. Ideal for panel mounting applications requiring precise resistance adjustments in circular packages.
PRV6SAABGYB25103KA
Vishay Intertechnology
Vishay Intertechnology's PRV6SAABGYB25103KA is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 1.5 W power dissipation. It operates b/w -55 to 125 °C and is panel mountable for applications requiring precise voltage control in industrial machinery and electronic equipment.
3362H-1-102LF
Bourns 3362H-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
1-1879318-8
POTENTIOMETER; Orientation (Actuator): VERTICAL; Dimensions: 17.3mm x 16mm x 6.5mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3314J-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-103E
Bourns 3314G-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and 300 V operating voltage capability.
3314J-1-502E
Bourns 3314J-1-502E is a CERMET variable resistor with 5000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314G-1-202E
Bourns 3314G-1-202E is a CERMET variable resistor with 2000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 300V.
3314J-1-104E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-501E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-104E
3314J-2-103E
3314G-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-501E
3314J-1-101E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-203E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-204E
Bourns 3314J-1-204E is a CERMET trimmer resistor with 200k ohm resistance, 20% tolerance, and 0.25W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and 300V operating voltage capability.
3314J-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314J-1-203E
3314J-1-103G
3314J-1-205G
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved