Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3314J-1-104E is a CERMET variable resistor with 100k ohm resistance, linear law, and 20% tolerance. It operates b/w -55°C to 125°C, has a power dissipation of 0.25W, and can handle up to 300V. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact rectangular package design.
Median Price
$1.470
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.280
100+ parts
-
1k+ parts
10k+ parts
Newark
$0.612
Distrelec
$1.417
$1.242
$0.992
$0.883
Chip1Stop
$1.010
$0.903
$0.854
DigiKey
$1.570
$1.092
$1.013
Bürklin Elektronik
$1.720
$1.350
$1.160
RS Americas
$1.730
$1.380
$1.120
Farnell
$1.760
$1.130
$0.928
Verical
$1.031
$0.844
$0.715
Element14
$2.230
$1.660
$1.300
Arrow
$0.690
Global Solutions Electronics Company
$0.600
Greenchips
$0.765
Tomark Electronics Ltd
$0.940
Nova Conductors
$1.025
TME
$1.110
Component Electronics Inc.
$1.920
$1.440
$1.250
TEDSS.com
$2.000
Chip Stock
Pegasus Components GmbH
LIBRA Elektronik GmbH
NAC Semi
$1.230
Freddi Giovanni
Bristol Electronics
Zilex Electronics Inc.
Rebound Electronics
IBS Electronics
$0.909
$0.774
Semi Source
Vyrian
Atlantic Semiconductor
ComSIT Distribution GmbH
Electro Sonic
$1.005
$0.777
Ack Elektronik San.Tic.Ltd.Sti
PC Components Company LLC
Dan-Mar Components
Sunrise Surplus Inc.
A&K Electronics
Rotakorn
Electronic Expediters
ACDS - Activité Composants Distribution Service
Prism Electronics
Lantek
A2Z Electronics, Inc.
Aztec Data Supply Inc.
$0.223
Corohmni
$0.239
Semicontronic
$0.660
$0.644
$0.640
Argo Parts USA
Netroflash
$0.974
$0.953
Continental Prestige Electronics
$1.020
Allen Electronics Distributors
$1.810
GreenTree Electronics
iodParts Technologies Inc.
$0.410
Cyclops Electronics Ltd (Excess)
Computer Components Inc. - USA
Eastek
Abacus Technologies
Resion (Excess)
Kepictronics
Futuretech Components
EMSNET (Excess)
The 70 °C rated temperature ensures reliable performance in a variety of operating conditions.
The vertical orientation of the actuator makes it easy to adjust and control the resistance value.
Cermet technology offers high reliability and stability in a variety of applications.
The linear law of resistance provides a predictable and consistent change in resistance with respect to the position.
The 100000 ohm resistance value allows for precise and accurate adjustment of the resistance in the circuit.
With an operating voltage of 300V, this variable resistor is suitable for a wide range of circuit applications.
The 20% tolerance ensures that the actual resistance value stays within acceptable limits, providing consistent performance.
With a rated power dissipation of 0.25W, this variable resistor can handle moderate power levels without overheating.
Variable Resistors 3314J-1-104E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3314J-1-104E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Alpha & Omega Semiconductor
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STMicroelectronics
Continental Device India
3224X-1-504E
Bourns
Bourns 3224X-1-504E is a linear trimmer pot with 12 turns, 500000 ohm resistance, and 10% tolerance. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range from -65°C to 150°C. The cermet technology and screw actuator make it suitable for precise adjustments in various circuits.
89PHR10LFTB
89PHR10LFTB by Tt Electronics Plc is a linear trimmer resistor with 10 ohm resistance, rated for 0.75W power dissipation and operating voltage of 200V. It features a CERMET technology, 20 turns, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
6574S-1-502
Bourns 6574S-1-502 is a linear potentiometer with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, shaft actuator type, and operates b/w -40 to 125 °C. Ideal for servo mount applications requiring precise resistance adjustments in a panel-mount setup.
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
TS53YJ105MR10
Vishay Intertechnology
Vishay Intertechnology's TS53YJ105MR10 is a CERMET variable resistor with 1000000 ohm resistance, 20% tolerance, and 220° rotation angle. It is used in surface mount applications with a rated power dissipation of 0.04 W and operating voltage of 200 V. Ideal for precision adjustments in electronic circuits requiring linear resistance characteristics.
3299Y-1-200
Bourns 3299Y-1-200 is a CERMET trimmer pot with 25 turns, linear resistance law, and 20 ohm resistance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
17PCSA103MC19P
TE Connectivity
TE Connectivity's 17PCSA103MC19P is a 10000 ohm linear potentiometer with 3 terminals and a rectangular package. It features a thick film technology, shaft actuator type, and 20% tolerance. Ideal for applications requiring precise resistance adjustments in through-hole mounting setups.
RV6LAYSA103A
Eti Systems
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3314G-1-103E
Bourns 3314G-1-103E is a linear trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and 300 V operating voltage capability.
3362P-1-103LF
Bourns 3362P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in a compact rectangular package.
PA16NM103MAB15
Vishay Intertechnology's PA16NM103MAB15 is a 10000 ohm linear potentiometer with 3 terminals. It has a max operating temperature of 125 °C and tolerance of 20%. Ideal for panel mount applications, this circular package resistor features a knob actuator and sealed construction.
PDA241-HRT02-503B0
Bourns PDA241-HRT02-503B0 is a 50000 ohm POTENTIOMETER with 15% Tolerance, suitable for Panel Mount applications. With a rated power dissipation of 0.5 W and operating voltage of 500 V, it operates b/w -10 to 70 °C, featuring a cylindrical package shape measuring 24.2 mm in diameter and 12.8 mm in length.
PA16NP104MAB15
Vishay Intertechnology's PA16NP104MAB15 is a 100k ohm linear potentiometer with 20% tolerance, suitable for panel mount applications. Featuring a circular package with a diameter of 16mm and an operating voltage of 224V, it has an angle of rotation of 270°. This conductive plastic resistor operates b/w -40°C to 85°C, making it ideal for various electronic control systems.
14910F0GJSX10501KA
Vishay Intertechnology's 14910F0GJSX10501KA is a CERMET variable resistor with a resistance of 500 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, with a max operating temperature of 125 °C and an angle of rotation of 270°.
3296W-1-100LF
Bourns 3296W-1-100LF is a 10 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. It operates at temperatures ranging from -55 to 125 °C and has a max voltage of 300 V. Ideal for applications requiring precise resistance adjustments in through-hole mounting configurations.
53C310K
Honeywell Sensing And Control
53C310K by Honeywell is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It features a conductive plastic technology in a circular package with horizontal actuator orientation. Ideal for panel mounting applications with temperature range from -55 to 120 °C.
RK27112A0A16
Alps Alpine
Alps Alpine RK27112A0A16 is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 300° rotation angle. It is used in PCB mount applications for adjusting settings with its shaft actuator and through-hole mounting capability. With a compact rectangular package of 27x25.3x24.5 mm, it offers precise control in various electronic devices.
73JB50K
73JB50K by Honeywell Sensing And Control is a linear wire wound potentiometer with 50000 ohm resistance, 3 terminals, and 5% tolerance. It has a circular package shape and vertical actuator orientation for chassis mount applications. Operating temperature ranges from -40 to 120 °C with a rated power dissipation of 2W.
PTL60-15R1-103B2
Bourns PTL60-15R1-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It has a slide actuator and PCB mount package style for applications in electronic circuits requiring precise resistance adjustments.
3296W-1-204LF
Bourns 3296W-1-204LF is a CERMET multi-turn trimmer resistor with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3314J-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-502E
Bourns 3314J-1-502E is a CERMET variable resistor with 5000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314G-1-202E
Bourns 3314G-1-202E is a CERMET variable resistor with 2000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 300V.
3314J-1-501E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-104E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-2-103E
3314G-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-501E
3314J-1-101E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-203E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-204E
Bourns 3314J-1-204E is a CERMET trimmer resistor with 200k ohm resistance, 20% tolerance, and 0.25W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and 300V operating voltage capability.
3314J-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3314J-1-203E
3314G-1-503E
3314J-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
3314J-1-103G
3314J-1-100G
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved