Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3296W-1-504LF is a CERMET variable resistor with 25 turns, 500000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300 V. Features multi-turn construction, through-hole mounting, and a rated power dissipation of 0.5 W.
Median Price
$2.275
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.040
100+ parts
$1.430
1k+ parts
$1.240
10k+ parts
$1.060
Newark
$2.240
$1.610
$1.370
$1.350
Farnell
$2.250
$1.190
-
Bürklin Elektronik
$2.300
$1.890
$1.630
DigiKey
$2.320
$1.605
$1.330
$1.165
Mouser Electronics
$1.590
$1.310
$1.160
RS (Exports)
$2.370
RS Americas
$2.400
$1.920
$1.560
Distrelec
$2.452
$1.711
Element14
$2.589
$1.659
$1.339
TTI
$1.400
TTI Europe
$1.308
$1.122
$1.057
Master Electronics
$1.540
$1.280
$1.090
Verical
$1.812
$1.612
Nova Conductors
$1.329
TME
$1.910
Rapid Electronics
$2.335
$1.803
Amar Radio Corporation
VNN
Electro Sonic
$1.410
IBS Electronics
$1.964
$1.669
$1.431
Bristol Electronics
LWI Electronics Inc
Atlantic Semiconductor
Vyrian
PC Components Company LLC
EMSNET
Cogito LLC
ComSIT Distribution GmbH
Classic Components Corporation
Ashlea Components Ltd
QIE Inc.
Speed Components Ltd
Component Sense
LIBRA Elektronik GmbH
Prism Electronics
Elcom Components
Aztec Data Supply Inc.
$0.200
Semicontronic
$1.110
$1.082
$1.077
Corohmni
$1.218
Aranea Global
$1.302
$1.250
Continental Prestige Electronics
Argo Parts USA
Allen Electronics Distributors
$2.450
$2.340
Perfect Parts
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Glotronic Ltd.
iodParts Technologies Inc.
Robosynatics
Lucentia Tech
$0.014
$0.013
Kepictronics
Computer Components Inc. - USA
0.51 mm - Thin lead diameter allows for easy insertion and soldering, making installation simple and efficient.
25 - With 25 turns, this variable resistor offers precise adjustment capabilities for fine-tuning circuits.
70 °C - Rated up to 70°C, this resistor can withstand high temperatures, ensuring reliability in various applications.
VERTICAL - Vertical actuator orientation allows for easy adjustment and accessibility in tight spaces.
CERMET - Utilizing cermet technology ensures high reliability and accuracy in resistance values over time.
LINEAR - Linear resistance allows for a consistent change in resistance for precise control of circuits.
Multi-Turn - Multi-turn construction provides fine adjustment capabilities for precise circuit tuning.
Tube - Packaged in a tube for easy storage, organization, and transportation.
500000 ohm - With a resistance of 500000 ohms, this variable resistor is suitable for a wide range of applications.
3 - Three terminals provide easy connections for quick installation and secure circuit connections.
Radial - Radial package style offers easy mounting and secure placement on circuit boards.
WIRE - Wire terminal shape allows for easy soldering and secure connections in circuits.
125 °C - With a maximum operating temperature of 125°C, this resistor can handle high heat environments.
55 °C - Able to operate at temperatures as low as -55°C, making it suitable for a wide range of environments.
100 - A temperature coefficient of 100 ppm/°C ensures minimal resistance changes with temperature fluctuations.
MATTE TIN - Matte tin terminal finish provides corrosion resistance and ensures reliable electrical connections.
6.4 mm - The 6.4 mm lead length allows for secure connections while still providing flexibility for installation.
10.03 mm - With a height of 10.03 mm, this resistor is compact and can fit in small spaces on circuit boards.
TRIMMER - Trimmer resistor type offers precision adjustment for fine-tuning circuits.
SCREW - Screw-type actuator allows for easy, precise adjustment and control of resistance values.
300 V - With an operating voltage of 300 V, this variable resistor is suitable for a wide range of voltage applications.
10 % - A tolerance of 10% ensures accurate and consistent resistance values within specified limits.
9.53 mm - The 9.53 mm package length offers a compact size for easy integration into circuit designs.
THROUGH HOLE MOUNT - Through-hole mounting allows for secure attachment to circuit boards for reliable connections.
0.5 W - Rated for a power dissipation of 0.5 W, this resistor can handle moderate power loads.
4.83 mm - With a width of 4.83 mm, this resistor is compact and can fit in tight spaces on circuit boards.
1 - A ganging number of 1 allows for single-unit use or multiple resistors to be connected for customized resistance values.
Variable Resistors 3296W-1-504LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3296W-1-504LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1554216002
Molex
WIRE AND CABLE;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
PTV09A-4225F-B103
Bourns
Bourns PTV09A-4225F-B103 is a 10000 ohm POTENTIOMETER with 20% Tolerance and 280° Angle Of Rotation. It features CARBON technology, PCB Mount package style, and operates b/w -10 to 50 °C. Ideal for applications requiring precise voltage control in compact spaces.
TC73W-1-504E
Bourns TC73W-1-504E is a SMT POTENTIOMETER with 500000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustment in compact spaces due to its small package size and wide angle of rotation up to 260°.
RV4NAYSD102A
Nte Electronics
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
93R1A-R22-A15L
Bourns 93R1A-R22-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. Ideal for panel mount applications in temperature-sensitive environments due to its -40 to 125 °C operating range and 150 ppm/°C temp coef.
M63X201KB40
Vishay Intertechnology
Vishay Intertechnology's M63X201KB40 is a CERMET TRIMMER resistor with 10% tolerance, rated at 0.5W power dissipation. It operates b/w -55°C to 125°C, offering linear resistance law and 270° rotation angle. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
P11S1FBGGSX00151KA
POTENTIOMETER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
3352T-1-103LF
The Bourns 3352T-1-103LF is a linear variable resistor with a resistance of 10k ohm, rated for temperatures b/w -55°C and 125°C. It is commonly used in PCB mount applications where precise resistance adjustment is required.
3540S-1-102L
Bourns 3540S-1-102L is a 1000 ohm potentiometer with linear resistance law, 10 turns, and 5% tolerance. It has a rated power dissipation of 2W, operates b/w -40 to 125°C, and features wire wound technology. Ideal for panel mount applications requiring precise resistance adjustments in circuits.
3361P-1-503GLF
Bourns 3361P-1-503GLF is a CERMET variable resistor with 50000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C, has a power dissipation of 0.5 W, and can handle up to 300 V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
TC33X-2-203E
Bourns TC33X-2-203E is a linear trimmer resistor with 20000 ohm resistance, 25% tolerance, and 270° rotation angle. It is used in applications requiring precise voltage adjustments in compact SMT packages. With a temperature coefficient of 250 ppm/°C, it operates b/w -40 to 100 °C for versatile electronic designs.
Y405310K0000J0L
Vishay Precision Group
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3862C-206-104AL
Bourns 3862C-206-104AL is a linear potentiometer with 100k ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
3862C-206-503AL
Bourns 3862C-206-503AL is a linear potentiometer with 50000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
225WA050
The Nte Electronics 225WA050 is a 50 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 225W and operates at a max temperature of 375°C. Ideal for chassis mount applications requiring precise resistance adjustments.
3266W-1-104LF
Bourns 3266W-1-104LF is a CERMET trimmer resistor with 12 turns, 100k ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features include multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
RV4NAYSD502A
Eti Systems
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
73JA2K
Honeywell Sensing And Control
73JA2K by Honeywell Sensing And Control is a 2000 ohm linear wire wound potentiometer with 3 lug terminals. It has a tolerance of 5% and rated power dissipation of 2W, suitable for chassis mount applications. Operating temperature ranges from -40 to 120 °C, making it ideal for various industrial control systems.
PTV111-3415A-B503
Bourns PTV111-3415A-B503 is a linear potentiometer with 3 terminals, rated power of 0.05W, and 20% tolerance. It has a max operating temperature of 50°C and min of -10°C. Ideal for applications requiring precise voltage control in compact PCB mount setups.
23ESA105MMF50AF
TE Connectivity
TE Connectivity's 23ESA105MMF50AF is a linear carbon film potentiometer with 1000000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It features a circular package, horizontal actuator orientation, and shaft actuator type. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3296X-1-222LF
TRIMMER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3296W-1-103LF
Bourns 3296W-1-103LF is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C with a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-102LF
Bourns 3296W-1-102LF is a 1000 ohm, 25-turn linear trimmer resistor with CERMET technology. It has a max operating temperature of 125°C and rated power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in circuits with up to 300 V operating voltage.
3296W-1-104LF
Bourns 3296W-1-104LF is a CERMET multi-turn trimmer resistor with 100000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-202LF
The Bourns 3296W-1-202LF is a multi-turn variable resistor with a resistance of 2000 ohm and a tolerance of 10%. It is commonly used in applications requiring precise voltage control, such as audio equipment and industrial automation systems.
3296W-1-503LF
Bourns 3296W-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
3296W-1-203LF
Bourns 3296W-1-203LF is a CERMET multi-turn trimmer resistor with 20000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-105LF
Bourns 3296W-1-105LF is a CERMET multi-turn trimmer resistor with 25 turns, 1000000 ohm resistance, and linear law. It has a rated power dissipation of 0.5 W and operates at temperatures from -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3296Y-1-103LF
Bourns 3296Y-1-103LF is a 10000 ohm, 25-turn linear cermet trimmer resistor with 10% tolerance. Operating voltage of 300V and rated power dissipation of 0.5W. Ideal for precision circuit adjustments in electronic devices due to its multi-turn construction and vertical actuator orientation.
3296W-1-502LF
Bourns 3296W-1-502LF is a CERMET multi-turn trimmer resistor with 5000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
3296W-1-501LF
Bourns 3296W-1-501LF is a 500 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. Operating voltage of 300V and power dissipation of 0.5W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3296W-1-101LF
Bourns 3296W-1-101LF is a 100 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. It operates b/w -55°C to 125°C and can handle up to 300V. Ideal for applications requiring precise resistance adjustments in through-hole mounting setups.
3296W-1-103RLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3296W-1-201LF
The Bourns 3296W-1-201LF is a multi-turn variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in applications that require precise voltage control, such as audio equipment and industrial machinery.
3296Y-1-104LF
Bourns 3296Y-1-104LF is a CERMET multi-turn trimmer resistor with 100000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-200LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3296X-1-503LF
Bourns 3296X-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-204LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3296Y-1-502LF
Bourns 3296Y-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296X-1-103LF
Bourns 3296X-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
3296Y-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved