Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3006P-1-102 is a CERMET trimmer pot with 1000 ohm resistance, 15 turns, and linear resistance law. It has a rated power dissipation of 0.75 W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting in applications requiring precise resistance adjustments.
Median Price
$2.710
Lifecycle Status
Suppliers In-Stock
55
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.600
100+ parts
$1.799
1k+ parts
$1.490
10k+ parts
$1.305
Mouser Electronics
$1.790
$1.480
$1.300
Newark
$2.820
$1.890
$1.650
$1.630
TTI
-
$1.430
Master Electronics
$3.320
$2.680
$2.520
Verical
$4.166
Global Solutions Electronics Company
$0.300
TEDSS.com
$1.350
$0.920
Freelance Electronics
$1.534
$1.840
$1.518
Component Electronics Inc.
$3.080
$2.310
$2.000
American Microsemiconductor Inc.
$3.120
Forefront Electronics and Design
$24.500
Chip Stock
Electronic Expediters
Vyrian
Semtec, LLC
MISTER SPROCKETS
Elite Semiconductor
Q Components
M&R Communications
VNN
Diverse Electronics
Resion
Electro Sonic
$1.210
$1.180
IBS Electronics
$2.356
$1.907
$1.837
Electronics Depot
LWI Electronics Inc
Standard Data Resources
J & M Industries LLC
Prism Electronics
Flex Direct, LLC
EMSNET
Semi Source
Component Sense
ACDS - Activité Composants Distribution Service
American Connector Supply Corp
Van Brakel Electronic
Holdelec - ElecDif-Pro
ComSIT Distribution GmbH
Sunrise Surplus Inc.
Atlantic Semiconductor
Mentor Electronics Marketing, LLC
Mil-Aero Solutions, Inc.
A2Z Electronics, Inc.
Bristol Electronics
Sea View Technologies
LIBRA Elektronik GmbH
ECAB
PAR Electronics
Nova Conductors
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
First Choice Components Inc.
Elcom Components
MRC Electronics
ZD Integrated Circuits Inc.
Authorized Procurement Solutions
Computer Components Inc. - USA
Netroflash
Perfect Parts
RTC Component Inc.
A-Plus Industry Inc.
EMSNET (Excess)
The small lead diameter makes it easy to fit into tight spaces and allows for precise positioning.
With 15 turns, this variable resistor offers a wide range of resistance values for fine-tuning circuits.
Suitable for normal operating temperatures, ensuring reliable performance in various applications.
Cermet technology provides high stability and precision in resistance values, making this variable resistor dependable for critical circuit adjustments.
Linear resistance allows for a proportional adjustment of resistance, making this variable resistor ideal for applications requiring precise control.
With a resistance value of 1000 ohm, this variable resistor is suitable for a wide range of applications requiring medium resistance.
Capable of handling high operating voltages, making it suitable for use in circuits with higher power requirements.
A tolerance of 10% ensures consistent and reliable performance in various operating conditions.
With a rated power dissipation of 0.75 W, this variable resistor can handle moderate power levels without overheating.
Variable Resistors 3006P-1-102 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3006P-1-102 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Assembly/Origin - Facility Transfer Jul/2012
PCN Packaging - 3006 Model Sept/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
New Jersey Semiconductor Products
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Transys Electronics
3610S-1-103
Bourns
Bourns 3610S-1-103 is a 10-turn linear wire wound potentiometer with 10000 ohm resistance and 5% tolerance. It has a rated power dissipation of 1.5W, operates b/w -1°C to 85°C, and features a knob actuator for precise adjustments. Ideal for panel mount applications requiring accurate resistance control in a compact circular package.
3329H-1-105LF
Bourns 3329H-1-105LF is a linear trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 150 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in circuits.
RK09L12B0A31
Alps Electric
POTENTIOMETER; Resistance: 50000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Packing Method: Tray; Angle Of Rotation: 300 deg;
SM-42TW104
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW104 is a 100000 ohm linear trimmer resistor with 11 turns and CERMET technology. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C, making it ideal for precise voltage adjustments in electronic circuits. This surface mount device with J BEND terminals is commonly used in applications requiring accurate resistance control at temperatures up to 85 °C.
PVG5A202C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
RK2711120026
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
67PR100KLF
67PR100KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85-125 °C operating temperature range. Ideal for PCB mounting applications due to its rectangular package shape and wire terminal finish.
575SX1A48S102SS
Honeywell Sensing And Control
575SX1A48S102SS by Honeywell is a linear potentiometer with 1000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a horizontal actuator orientation and conductive plastic technology in a rectangular package. Ideal for panel mounting applications with operating temperatures ranging from -40 to 120 °C.
3299X-1-503LF
The Bourns 3299X-1-503LF is a CERMET trimmer pot with 25 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.5W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications in various electronic circuits requiring precise resistance adjustments.
PVG5A103C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PT6KV-502A2020
Amphenol
Amphenol's PT6KV-502A2020 is a 5000 ohm linear trimmer resistor with 20% tolerance, suitable for PCB mounting. It operates at temperatures ranging from -25 to 70 °C and has a power dissipation of 0.1 W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RT025AS4700KB
Vishay Intertechnology
Vishay Intertechnology's RT025AS4700KB is a 470 ohm linear wire wound potentiometer with 10% tolerance. Operating voltage of 108V, rated power dissipation of 25W, and temperature range from -55 to 320 °C make it ideal for panel mount applications requiring precise resistance control.
PDB185-GTR11-254A2
Bourns PDB185-GTR11-254A2 is a 250k ohm potentiometer with 20% tolerance, suitable for panel mount applications. Featuring a cylindrical package with 27.3mm length and 15mm diameter, it has an operating voltage of 100V and can handle temperatures from -10 to 70°C. Ideal for precise resistance adjustments in electronic circuits.
RV6LAYSA103A
Eti Systems
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
RRS1K0E
Ohmite Manufacturing
Ohmite Manufacturing's RRS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 500W power dissipation rating, 325° rotation angle, and PANEL MOUNT package style. Ideal for precise control applications in various electronic circuits.
D12K300E
Ohmite Manufacturing's D12K300E is a 300 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 12W, operating voltage of 565V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance adjustments in high-temperature environments up to 350 °C.
3862C-206-104AL
Bourns 3862C-206-104AL is a linear potentiometer with 100k ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
PTC15NV02-104A2020
Amphenol's PTC15NV02-104A2020 is a CERMET POTENTIOMETER with 100000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -40 to 90 °C. Ideal for PCB mounting applications requiring precise voltage control in a compact package.
72PMR50LF
72PMR50LF by Tt Electronics Plc is a CERMET trimmer pot with 50 ohm resistance, linear law, and 20% tolerance. It has a max operating temperature of 125°C and is ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
PE30L0FL103KAB
Vishay Intertechnology PE30L0FL103KAB is a 3W linear potentiometer with 10% tolerance, operating voltage of 173V, and temperature coefficient of 150 ppm/°C. It is used in panel mount applications for precise resistance adjustments in circuits requiring a max operating temperature of 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3006P-7-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
3006P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-203LF
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-502LF
Bourns 3006P-1-502LF is a CERMET POTENTIOMETER with 5000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications in various electronic devices. With a rated power dissipation of 0.75 W, it offers precise control over voltage levels up to 400 V.
3006Y-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-502LF
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-7-103LF
The Bourns 3006P-7-103LF is a linear trimmer pot with a resistance of 10k ohm, rated power dissipation of 0.75W, and an operating voltage of 400V. It is commonly used in PCB mount applications for precise resistance adjustment.
3006P-7-501LF
3006W-1-203LF
3006P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-104LF
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
3006P-1-254LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved