Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THREE PHASE EMI FILTER; Rated Current: 150 A; Height: 114 mm; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 100 Cel; Length: 254 mm;
Median Price
$1,087.470
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
EMI Mains Filters RP400150-0-S attributes and parameters. Explore more EMI Mains Filters devices from Astrodyne Tdi
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
Astrodyne TDI develops power technologies and products that people depend upon, to enhance, protect, and save lives. Our ultimate goal is to maintain our position as a world-renowned leader in the development of power conversion solutions that safeguard and enrich the lives of people everywhere. We strive to be the go-to partner and employer of choice, recognized for our exceptional growth and business achievements. At Astrodyne TDI, we strive to not only meet but surpass our customers' expectations. With a focus on quality, exceptional customer service, employee development, and innovation, we are dedicated to maintaining the effectiveness of our Quality Management System and embracing a mindset of continual improvement.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Nexperia
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
RN214-3-02-2M0
Schaffner Holding Ag
Schaffner Holding Ag's RN214-3-02-2M0 EMI Mains Filter has a rated voltage of 300V, operating temperature range from -40 to 100 °C, and a rated current of 3A. It is used for single-phase EMI filtering applications with approvals from UL, IEC, VDE, and ENEC-10.
CMS3-1-R
Eaton Corporation
Eaton Corporation's CMS3-1-R is a UL-approved single-phase EMI filter with 4 terminals. It has a rated current of 5.7A and operates b/w -40°C to 160°C. Ideal for surface mount applications, its compact size of L11.43xB11.43xH6.0 (mm) makes it suitable for various electronic devices requiring EMI mains filtering.
RTEN-5060
TDK
The TDK RTEN-5060 EMI Mains Filter is a THREE PHASE filter with 60A rated current and 500V voltage. It offers high insulation resistance of 100 Mohm, UL and EN approvals, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
SS11VL-R07190
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Terminal Finish: NOT SPECIFIED; Rated Voltage: 250 V; Length: 22 mm; Additional Features: INDUCTANCE 19 MILLIHENRY;
6VV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 15 dB; Maximum Leakage Current: .5 mA;
FN2010-3-06
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
RN214-1.5-02-6M8
RN214-1.5-02-6M8 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1.5A rated current. It operates b/w -40 to 100°C and has dimensions of L23.0xB15.5xH25.0 mm, suitable for single-phase EMI filtering applications in various industries.
6609053-5
TE Connectivity
TE Connectivity's 6609053-5 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. It operates b/w -10°C to 40°C, suitable for PANEL MOUNT applications in EMI mains filtering at 50Hz frequency.
RN214-1-02-15M
RN214-1-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with 300V rated voltage and 1A rated current. Operating at temperatures from -40°C to 100°C, it has dimensions of L23.0xB15.5xH25.0 mm and is ideal for applications requiring effective filtering of electromagnetic interference in electronic systems.
6EHQ1
TE Connectivity's 6EHQ1 EMI Mains Filter offers UL, CSA, VDE approvals with insertion loss of 24-42 dB. Rated at 250V and 6A, it operates b/w -10 to 40°C for single-phase filtering in applications requiring noise suppression up to 0.15 MHz frequencies.
10VK1
The TE Connectivity 10VK1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 6 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
PLH10AN1612R1P2B
Murata Manufacturing
Murata Manufacturing's PLH10AN1612R1P2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. Ideal for applications requiring EMI mains filtering, it has dimensions of L18.0xB16.0xH17.5 mm and rated current of 2.1 A for through-hole mounting.
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
3-103-708
Schurter Ag
Schurter Ag's 3-103-708 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. With 10A rated current, it operates at -40 to 100°C and has max leakage current of 0.5mA. Ideal for panel mounting in applications requiring effective EMI filtering at 50/60Hz frequency.
EH20-0.5-02-18M
EH20-0.5-02-18M by Schaffner Holding Ag is a UL approved EMI mains filter with 250V rated voltage and 0.5A rated current. It operates b/w -25°C to 100°C, suitable for single-phase applications at 400Hz frequency. With dimensions of L21.0xB21.0xH17.8 mm, it offers high pot protection up to 2000V through hole mounting.
10VV1
10VV1 by TE Connectivity is a single-phase EMI filter with a rated voltage of 250V. It offers insertion loss of 15dB at min frequency and 55dB at max frequency. This panel mount filter is suitable for applications requiring UL, CSA, and VDE approvals.
SS11VL-R22020
KEMET Corporation
SS11VL-R22020 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage, 2.2A current, and -25 to 75°C operating temp range. Its compact size (L22.0xB14.5xH19.5 mm) makes it ideal for EMI mains filtering applications in various electronic devices.
6EDP
TE Connectivity's 6EDP EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 10 dB to 40 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for PCB mounting, this single-phase filter has a compact size of L36.6xB31.5xH24.15mm and is suitable for applications requiring up to 6A current handling capacity.
CMS2-1-R
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Astrodyne Tdi
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved