Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); Height: 24.5 mm; Rated Voltage: 250 V;
Median Price
$1.625
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.200
100+ parts
$1.410
1k+ parts
$1.250
10k+ parts
$1.120
DigiKey
$1.460
$1.246
$1.026
Verical
-
$1.039
Chip1Stop
$1.050
Nova Conductors
Ampacity Inc.
$0.880
Continental Prestige Electronics
$2.110
$1.130
$0.937
Corohmni
$3.362
Argo Parts USA
Perfect Parts
Netroflash
EMI Mains Filters SS21V-R300013 attributes and parameters. Explore more EMI Mains Filters devices from Tokin
Additional Features:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Terminals:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
To promote globalization. To maximize the potential of your company. And for the future, to make a further leap forward. Tokin has made a new start by becoming a member of KEMET in the United States. KEMET is a leading manufacturer of capacitors with extensive networks in the United States and Europe. We started manufacturing capacitors in 1958 and have now grown to become a global leader in the electronic component manufacturing industry. We have thousands of employees doing business in locations around the world. Capacitors and electromagnetic components created through constant research and development and cutting-edge engineering are used in a wide range of products in a wide range of industries, including aircraft, mobile devices, automobiles, industrial equipment, cloud computing, and medical equipment, and have earned a high reputation. I'm here. At KEMET, not only the company, but also each and every employee of the company adheres to the attitude of putting the customer first, delivering products speedily to customers in all regions of the world, and always keeping in mind fair transactions and appropriate sales prices. I'm here. In addition to product innovation and high quality, we are an electronic component manufacturer that maintains high standards in all aspects such as global strategy, customer satisfaction, environmental consideration, and social contribution. By joining the KEMET Group this time, Tokin's strengths in products for consumer electronics and the Asian market, and KEMET's strengths in products for industrial equipment and automobiles and the European and American markets will complement each other, resulting in an even larger and stronger company. evolved into an organization.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
FN2412-32-33
Schaffner Holding Ag
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
SS26V-070510
KEMET Corporation
SS26V-070510 by KEMET Corporation is a single-phase EMI filter with a rated voltage of 250 V. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 120 °C. This filter is commonly used for EMI mains filtering applications.
RN202-0.3-02
RN202-0.3-02 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It has UL and VDE approvals, making it suitable for various applications requiring EMI mains filtering.
CMS1-7-R
Eaton Corporation
Eaton Corporation's CMS1-7-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.6A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
SCT25XV-150-1R6A010JH
KEMET's SCT25XV-150-1R6A010JH is a 1000V rated, 15A single-phase EMI mains filter with insulation resistance of 100 Mohm. Operating temperature ranges from -40°C to 150°C. Ideal for applications requiring through-hole mounting and effective EMI filtering in various electronic systems.
810913010112
Wuerth Elektronik & Kg
Wurth Elektronik 810913010112 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A rated current. It operates at -25 to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
7448640404
Wurth Elektronik 7448640404 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.45A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in applications requiring through hole mounting at 50Hz frequency.
B84144A0016R120
TDK
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
FMW-65-0003
Schurter Ag
Schurter Ag's FMW-65-0003 is a UL, IEC, VDE, ENEC-10 approved 440V three-phase EMI filter with 10A rated current. With a high pot of 3000V and max leakage current of 0.5mA, it operates b/w -25°C to 100°C. Ideal for panel mount applications due to its compact dimensions of L66.0xB51.0xH43.0mm.
2FB3
TE Connectivity
TE Connectivity's 2FB3 EMI Mains Filter is a SINGLE PHASE filter with 277V voltage rating and 2A current. It operates b/w -10°C to 50°C, with max leakage current of 0.12mA. Ideal for THROUGH HOLE MOUNT applications in electronic devices requiring EMI suppression.
RTEN-5010D
The TDK RTEN-5010D is a 3-phase EMI filter with a rated voltage of 500V and current of 10A. It offers high insulation resistance of 100 Mohm, approvals from UL and EN, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective mains filtering at a frequency of 60Hz.
PS0S0DH6A
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
10VSB1
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SC-26-S010JH
KEMET Corporation's SC-26-S010JH is a 3-phase EMI mains filter with 500V UL approval. It offers a rated current of 26A, insulation resistance of 500 Mohm, and operates b/w -25°C to 120°C. Ideal for applications requiring high-pot testing up to 100V, it has a diameter of 50mm and height of 28mm for through-hole mounting in various electronic systems.
30AYP6C
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Dimensions: L224XB141.5XH65 (mm)/L8.82XB5.57XH2.56 (inch); Approvals (V): UL; CSA; VDE; Rated Voltage: 250 V;
ESP-03-221-D
Cosel
The Cosel ESP-03-221-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. With a max operating temperature of 85°C and high pot of 2500V, it's ideal for DIN rail mounting in applications requiring efficient EMI mains filtering.
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Height: 2.6 mm; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
SSHB21HS-R10300
KEMET Corporation's SSHB21HS-R10300 is a UL approved EMI mains filter with 250V rated voltage and 1A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
RTEN-5030D
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 30 A; Length: 140 mm; Height: 50.4 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel;
FN2010-12-06
FN2010-12-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH29.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems up to 13.8A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS21V-R300013
SINGLE PHASE EMI FILTER; Rated Current: 3 A; High Pot: 500 V; Rated Voltage: 250 V; Length: 20.6 mm; Maximum Operating Temperature: 120 Cel;
SS21V-040520
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .4 A; No. of Terminals: 4; Operating Frequency (Hz): 50Hz; Length: 20.5 mm; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch);
SS21V-050360
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 36 MILLIHENRY; Rated Voltage: 250 V;
SS21V-180029
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; No. of Terminals: 4; Operating Frequency (Hz): 50Hz; Additional Features: INDUCTANCE 2.9 MILLIHENRY; Rated Voltage: 250 V;
SS21V-220017
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Minimum Insulation Resistance: 100 Mohm; No. of Terminals: 4; Width (mm): 16.5; Mounting Type: THROUGH HOLE MOUNT;
SS21V-300008
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 16.5; Height: 24.5 mm; Minimum Insulation Resistance: 100 Mohm; No. of Terminals: 4;
SS21V-R031380
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.5; Rated Voltage: 250 V; Height: 24.5 mm;
SS21V-R040770
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Operating Frequency (Hz): 50Hz; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
SS21V-R050540
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); No. of Terminals: 4; Maximum Operating Temperature: 343 Cel; Height: 24.5 mm;
SS21V-R060330
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Additional Features: INDUCTANCE 33 MILLIHENRY; Mounting Type: THROUGH HOLE MOUNT; Length: 20.5 mm; Maximum Operating Temperature: 348 Cel;
SS21V-R070260
SINGLE PHASE EMI FILTER; Rated Current: .7 A; No. of Terminals: 4; Maximum Operating Temperature: 343 Cel; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); Minimum Operating Temperature: -25 Cel;
SS21V-R080200
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Width (mm): 16.5; Length: 20.5 mm; Operating Frequency (Hz): 50Hz; Rated Voltage: 250 V;
SS21V-R100146
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 20.5 mm; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.5;
SS21V-R110100
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Minimum Operating Temperature: -25 Cel; Height: 24.5 mm; Operating Frequency (Hz): 50Hz; No. of Terminals: 4;
SS21V-R130066
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 343 Cel; Mounting Type: THROUGH HOLE MOUNT;
SS21V-R150057
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Width (mm): 16.5; Height: 24.5 mm; Maximum Operating Temperature: 343 Cel; No. of Terminals: 4;
SS21V-R180044
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Rated Voltage: 250 V; Width (mm): 16.5; Minimum Operating Temperature: -25 Cel; Length: 20.5 mm;
SS21V-R200036
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 343 Cel; Operating Frequency (Hz): 50Hz; Width (mm): 16.5;
SS21V-R220026
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Width (mm): 16.5; Rated Voltage: 250 V; Height: 24.5 mm; Operating Frequency (Hz): 50Hz;
SS21V-R250023
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Additional Features: INDUCTANCE 2.3 MILLIHENRY; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved