Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Leakage Current: .00001 A; Maximum Forward Current: .02 A; No. of Elements: 1; Maximum Isolation Voltage: 5000 V;
Median Price
$1.464
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$1.351
1k+ parts
$0.868
10k+ parts
$0.758
Verical
$1.577
Nova Conductors
Cyclops Electronics Ltd
Electro Sonic
$0.840
$0.737
$0.662
VNN
IBS Electronics
$0.954
$0.884
Vyrian
Euro-Tech
LIBRA Elektronik GmbH
Corohmni
$0.340
Aztec Data Supply Inc.
$0.568
Ampacity Inc.
$0.670
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Authorized Procurement Solutions
Metaverse IC Inc.
Argo Parts USA
Kepictronics
Robosynatics
$0.066
$0.061
Lucentia Tech
Aranea Global
Optocoupler Trigger Device Outputs APT1221 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Aromat
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
APT1221 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Devs Brand/Safety Marking 17/Nov/2021
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
MOC3083SR2VM
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 800 V;
MOC3063VM
The Onsemi MOC3063VM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85 °C, with 600V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage and low forward current consumption.
TLP161J(U,C,F)
Toshiba
Toshiba's TLP161J(U,C,F) is a single optocoupler with peak surge current of 1.2A, ideal for triggering devices. With a max forward current of 0.05A and triac output, it operates b/w -40 to 100°C. Its isolation voltage reaches 2500V, making it suitable for applications requiring high voltage protection.
IL4118-X007T
Vishay Intertechnology
Vishay Intertechnology IL4118-X007T is a single optocoupler with 0.06A forward current, 800V peak off-state voltage, and 5300V isolation voltage. Ideal for triggering devices in applications requiring high reliability and electrical isolation at temperatures ranging from -55°C to 100°C.
MOC3072SM
The Onsemi MOC3072SM is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 4170V, and is ideal for triggering devices in applications requiring high voltage protection.
4N393S
4N393S by Fairchild Semiconductor is an SCR output optocoupler with a max on-state voltage of 1.3V and peak surge current of 10A. It operates b/w -55°C to 100°C, with a max isolation voltage of 5300V. Ideal for applications requiring high isolation and triggering devices in various electronic circuits.
MOC3051TVM
The Onsemi MOC3051TVM is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL420-X009
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Configuration: SINGLE; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V;
MOC3041VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: VDE APPROVED; Maximum On State Current: .1 A;
MOC3020M
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Nominal Input Trigger Current: 15 mA; Minimum Operating Temperature: -40 Cel;
IL4218-X001
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Nominal Input Trigger Current: .7 mA; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .3 A; Minimum Operating Temperature: -55 Cel;
MOC3063S-TA1
MOC3063S-TA1 by Lite-on Technology is a single TRIAC output optocoupler with zero cross voltage. It has a max on-state voltage of 3V, peak surge current of 1A, and max isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in a wide temperature range from -40 to 100°C.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
3049
Nte Electronics
The Nte Electronics 3049 is a single optocoupler with triac output, ideal for triggering devices. It has a max forward current of 0.05A, nominal input trigger current of 15mA, and min peak off-state voltage of 250V. With an isolation voltage of 7500V, it ensures safe electrical separation in various applications.
BRT13H-X016
TRIGGER OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Maximum On State Current: .3 A; Maximum Isolation Voltage: 5300 V;
IL4118-X016
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Nominal Input Trigger Current: .7 mA; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V;
MOC3031SVM
The Onsemi MOC3031SVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, with 250V repetitive off-state voltage and 4170V isolation voltage. Ideal for triggering devices in applications requiring high isolation levels and precise control.
MOC3062SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 10 mA; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 600 V;
FOD4118SDV
FOD4118SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, suitable for triggering devices in high-voltage applications. With a max isolation voltage of 5000V, it is ideal for surface mount installations requiring precise control.
MOC3021SR2VM
MOC3021SR2VM by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
APT1221
Panasonic
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SINGLE; Minimum Peak Off-state Voltage: 600 V; Maximum On State Current: .1 A; Maximum Reverse Leakage Current: .00001 A;
APT1211AZ
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .02 A; No. of Elements: 1; Maximum On State Voltage: 2.5 V; Minimum Peak Off-state Voltage: 600 V;
APT1211SX
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Input Trigger Current: .01 A; Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; Maximum On State Voltage: 2.5 V;
APT1211SZ
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .02 A; Additional Features: UL RECOGNIZED, VDE APPROVED; Nominal Input Trigger Current: 10 mA;
APT1211WAY
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; No. of Elements: 1; Maximum Forward Current: .02 A; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
APT1212AX
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Repetitive Off-state Voltage (Peak): 600 V; Maximum Reverse Leakage Current: .00001 A; Configuration: SINGLE; Maximum On State Current: .1 A;
APT1221AX
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; No. of Elements: 1; Nominal Input Trigger Current: 10 mA; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Voltage: 2.5 V;
APT1221A
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Nominal Input Trigger Current: 10 mA; Maximum On State Current: .1 A; No. of Elements: 1; Minimum Operating Temperature: -40 Cel;
APT1221SX
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .05 A; No. of Elements: 1; Maximum Input Trigger Current: .01 A;
APT1221SZ
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Reverse Leakage Current: .00001 A; Maximum Isolation Voltage: 3750 V; Nominal Input Trigger Current: 10 mA; Configuration: SINGLE;
APT1221WAW
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Nominal Input Trigger Current: 10 mA; Peak Surge Current: 1.2 A; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -40 Cel;
APT1221WAY
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 100 Cel; Maximum Input Trigger Current: .01 A; Maximum Forward Current: .02 A;
APT1221WA
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Peak Off-state Voltage: 600 V; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Input Trigger Current: .01 A;
APT1222AX
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Maximum Reverse Leakage Current: .00001 A; Maximum On State Voltage: 2.5 V;
APT1222WA
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Input Trigger Current: .01 A; Minimum Operating Temperature: -40 Cel; Repetitive Off-state Voltage (Peak): 600 V; No. of Elements: 1;
APT1222W
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Repetitive Off-state Voltage (Peak): 600 V; Maximum Forward Current: .02 A;
APT1231SZ
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Additional Features: UL RECOGNIZED, VDE APPROVED; Repetitive Off-state Voltage (Peak): 600 V; Maximum On State Voltage: 2 V; Maximum Operating Temperature: 100 Cel;
APT1231WAY
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Nominal Input Trigger Current: 10 mA; Minimum Peak Off-state Voltage: 600 V; Maximum Operating Temperature: 100 Cel; Maximum Input Trigger Current: .01 A;
APT1231
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Maximum On State Current: .1 A; Maximum Input Trigger Current: .01 A;
APT1232AZ
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Input Trigger Current: .01 A; Maximum Isolation Voltage: 5000 V; Repetitive Off-state Voltage (Peak): 600 V; Configuration: SINGLE;
Aromat
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved