Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: 2 mA;
Median Price
$4.300
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Future Electronics
1+ parts
$1.480
100+ parts
$1.430
1k+ parts
$1.380
10k+ parts
-
Adafruit Industries
$2.300
$2.185
Bürklin Elektronik
$2.570
$2.280
$2.180
Chip1Stop
$1.800
$1.600
$1.500
Farnell
$4.510
$2.270
$1.990
Arrow
$4.841
$2.808
$2.382
$2.174
Mouser Electronics
$4.930
$2.890
$2.460
$2.320
Newark
$5.040
$2.940
$2.490
$2.250
Element14
$7.080
$4.130
$3.660
Verical
$2.817
$2.389
$2.181
TTI Europe
$1.890
$1.738
Distrelec
Digiode
$1.406
Nova Conductors
$2.233
TME
$4.480
$1.920
Vyrian
Schukat
$1.956
$1.630
LIBRA Elektronik GmbH
IBS Electronics
$2.284
$2.171
Ack Elektronik San.Tic.Ltd.Sti
NAC Semi
$2.140
Gateway Electronic Components
Rutronik
$2.450
VNN
ABC Electronics Ltd.
ACDS - Activité Composants Distribution Service
Huijzer Components
ComSIT Distribution GmbH
ComSIT USA
Corel Iberica Componentes, S.L.
LittleDiode
Pegasus Components GmbH
Aztec Data Supply Inc.
$0.486
Semicontronic
$1.260
$1.228
$1.222
Corphita
$1.332
Aranea Global
$2.188
$2.101
Argo Parts USA
Modulus Dynamics
$2.144
$2.054
Corohmni
Advanced Electronics
Ampacity Inc.
$2.740
Continental Prestige Electronics
$2.780
$1.780
$1.670
Perfect Parts
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Metaverse IC Inc.
GreenTree Electronics
Assy Fe
Kepictronics
Infinite Electronics LLP (Excess)
iodParts Technologies Inc.
Optocoupler Trigger Device Outputs BRT13H attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Infineon Technologies
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Terminal Finish:
BRT13H Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3103F
Idec
ROTARY SWITCH;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Db Lectro
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Rochester Electronics
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
Rectron
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
IL4208-X007T
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 1 mA; Minimum Peak Off-state Voltage: 800 V; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE;
TIL3020
TIL3020 by Texas Instruments is a TRIAC output optocoupler with 15mA trigger current, 400V peak off-state voltage, and 3535V isolation. It operates b/w -40°C to 100°C, suitable for applications requiring single configuration optocoupler with 0.05A forward current and 0.1A on-state current.
FOD4208S
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TLP268J(V4,E(T
Toshiba
Toshiba's TLP268J(V4,E(T is a single optocoupler with peak surge current of 1.2A, max forward current of 0.0075A, and max on state current of 0.07A. Ideal for applications requiring high isolation voltage (3750V) and repetitive off-state voltage (600V), such as industrial control systems.
BRT22H
Vishay Intertechnology
Vishay Intertechnology's BRT22H is a single TRIAC output optocoupler with 0.02A max forward current and 600V min peak off-state voltage. It operates b/w -40 to 100°C, offers 5300V isolation, and has a 0.3A max on-state current. Ideal for applications requiring reliable optoelectronic triggering in various temperature conditions.
MOC3041TVM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; Minimum Peak Off-state Voltage: 400 V; Additional Features: VDE APPROVED;
MOC3083S
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum Isolation Voltage: 7500 V;
BRT23H
Siemens
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 2 mA; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V;
IL4118-X001
IL4118-X001 by Vishay Intertechnology is a single optocoupler with triac output, featuring a max forward current of 0.06A and isolation voltage of 5300V. With a nominal input trigger current of 0.7mA, it operates b/w -55°C to 100°C. Ideal for applications requiring high isolation and reliable triggering in various electronic circuits.
TLP3062AF(D4,F(O
Toshiba's TLP3062AF(D4,F(O) is a single TRIAC output optocoupler with 3V max on-state voltage, 1.2A peak surge current, and 600V repetitive off-state voltage. Ideal for applications requiring high isolation voltage (5000V), such as industrial control systems and power supplies.
MOC3011
Thomson Consumer Electronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Maximum Input Trigger Current: .01 A; Maximum On State Voltage: 3 V; Repetitive Off-state Voltage (Peak): 250 V;
MOC3021STA1-V
MOC3021STA1-V by Lite-on Technology is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 100°C, has an isolation voltage of 5000V, and is ideal for applications requiring optocoupler trigger device outputs.
MOC3020
The Texas Instruments MOC3020 is a single optocoupler with a max forward current of 0.05A and nominal input trigger current of 15mA. It features a min peak off-state voltage of 400V and max isolation voltage of 7500V, making it ideal for triggering devices in applications requiring high voltage protection and signal isolation.
FODM3011
The Onsemi FODM3011 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
FODM3053V_NF098
FODM3053V_NF098 by Onsemi is a TRIAC output optocoupler with max on-state voltage of 3V and max forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for triggering devices in applications requiring high voltage protection.
FODM3053R2_NF098
FODM3053R2_NF098 by Fairchild Semiconductor is a single configuration optocoupler trigger device output with a max forward current of 0.06 A. It is commonly used in applications requiring a nominal input trigger current of 5 mA, a min peak off-state voltage of 600 V, and an isolation voltage of 3750 V.
TLP265J(T7-TPL,E(T
Toshiba's TLP265J(T7-TPL,E(T optocoupler features 2.8V max on-state voltage, 1.2A peak surge current, and 85°C max operating temp. Ideal for triggering devices in applications requiring high isolation voltage of 3750V, such as industrial control systems and power supplies.
FODM3082V
FODM3082V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
FOD4216TV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V; Minimum Peak Off-state Voltage: 600 V;
IL420-X007
TRIAC OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 1 mA; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BRT13H
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
TRIGGER OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .3 A; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE;
Vishay Telefunken
TRIGGER OUTPUT OPTOCOUPLER; Maximum Forward Current: .02 A; Maximum On State Current: .3 A; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V;
Telefunken Microelectronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .3 A; Maximum Input Trigger Current: .002 A; Maximum Operating Temperature: 100 Cel;
The Vishay Intertechnology BRT13H is a TRIAC output optocoupler with a max on-state voltage of 2.3V and peak surge current of 3A. It operates b/w -40°C to 100°C, has an isolation voltage of 5300V, and is ideal for triggering devices in various applications requiring through-hole mounting.
BRT13H-X006
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 800 V; Maximum Forward Current: .02 A;
TRIGGER OUTPUT OPTOCOUPLER; Maximum Forward Current: .02 A; Additional Features: UL RECOGNIZED; Maximum On State Current: .3 A; Configuration: SINGLE; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
TRIGGER OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .3 A; Minimum Operating Temperature: -40 Cel; Minimum Peak Off-state Voltage: 800 V; Additional Features: UL RECOGNIZED;
BRT13H-X017T
TRIGGER OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A; No. of Elements: 1; Additional Features: UL APPROVED; Minimum Operating Temperature: -40 Cel;
TRIGGER OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V;
TRIGGER OUTPUT OPTOCOUPLER; Maximum On State Current: .3 A; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 5300 V;
Vishay Intertechnology's BRT13H-X017T is a single TRIAC output optocoupler with max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40 to 100°C, ideal for triggering devices in high-voltage applications like industrial control systems and power supplies.
BRT13H-X007T
TRIAC OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A;
BRT13H-X007
TRIGGER OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .02 A; Nominal Input Trigger Current: 2 mA;
Vishay Intertechnology's BRT13H-X007 is a single optocoupler trigger device with a max forward current of 0.02A and isolation voltage of 5300V. With a nominal input trigger current of 2mA, it operates b/w -40°C to 100°C. Ideal for applications requiring high isolation voltage and precise triggering in various temperature conditions.
TRIGGER OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 800 V; Maximum On State Current: .3 A; Configuration: SINGLE; No. of Elements: 1; Maximum Forward Current: .02 A;
TRIGGER OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; No. of Elements: 1; Maximum On State Current: .3 A;
BRT13H-X017
TRIGGER OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: 2 mA; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .02 A; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 100 Cel;
BRT13M
TRIGGER OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 3 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved