Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RELAY SOCKET; Housing Material: POLYBUTYLENE TEREPHTHALATE; No. of Contacts: 7; Contact Finish (Mating): NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Chip Carrier IC & Component Sockets 60430111 attributes and parameters. Explore more Chip Carrier IC & Component Sockets devices from Aptiv
Number of Positions or Pins:
IC Socket Type:
Housing Material:
60430111 Chip Carrier IC & Component Sockets trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
28-C182-10
Aries Electronics
28-C182-10 by Aries Electronics is a DIP28 IC socket with 28 contacts, made of brass with gold finish. It has a PCB contact row spacing of 15.24mm and operates b/w -55°C to 105°C. Ideal for applications requiring a chip carrier socket with high insulation resistance and dielectric voltage withstand capability.
304-13-128-41-780000
Mill-max Mfg
Mill-max Mfg's 304-13-128-41-780000 is a POLYETHYLENE Chip Carrier IC Socket for SIP28 devices with 28 GOLD OVER NICKEL contacts. Ideal for applications requiring RECTANGLE contact configuration.
27E937
TE Connectivity
RELAY SOCKET; Contact Material: NOT SPECIFIED; Contact Finish (Mating): NOT APPLICABLE;
XR2P-2041
Omron
IC SOCKET; Contact Material: BERYLLIUM COPPER; Contact Finish (Termination): GOLD; Manufacturer Series: XR2P; JESD-609 Code: e4; Contact Finish (Mating): GOLD (10);
8-1393163-3
IC SOCKET; Housing Material: POLYAMIDE; Termination Type: SOLDER; No. of Contacts: 3; Contact Finish (Mating): NOT APPLICABLE; Contact Material: NOT APPLICABLE;
1860100-1
IC SOCKET; Termination Type: SOLDER; Contact Finish (Mating): NOT APPLICABLE; Additional Features: STANDARDS: CUL; VDE; No. of Contacts: 14; Contact Material: NOT APPLICABLE;
350-10-164-00-001000
350-10-164-00-001000 by Mill-max Mfg is a chip carrier IC & component socket made of polyethylene. It is designed for use on SIP64 devices with 64 contacts and features gold over nickel contact finish. This IC socket has a rectangular contact configuration, making it suitable for various applications in electronics.
342-40-139-00-591000
Mill-max Mfg's 342-40-139-00-591000 is a POLYETHYLENE IC SOCKET for SIP39 devices with 39 contacts. It features MATTE TIN OVER NICKEL finish, RECTANGLE contact config, and is ideal for Chip Carrier IC & Component Sockets applications.
2227MC-16-03-09-F1
Multicomp Pro
IC SOCKET; Device Type Used On: DIP16; Housing Material: POLYBUTYLENE TEREPHTHALATE; Additional Features: STANDARD: UL94-0; JESD-609 Code: e4; Contact Finish (Termination): GOLD;
27E460
IC SOCKET; Housing Material: POLYESTER; Termination Type: SCREW; Contact Material: NOT APPLICABLE; Contact Finish (Mating): NOT APPLICABLE; Contact Finish (Termination): Tin (Sn);
416-43-226-41-001000
The Mill-max Mfg 416-43-226-41-001000 is a PLASTIC IC SOCKET for DIP26 devices with 26 contacts and TIN finish. It is used in Chip Carrier IC & Component Sockets applications due to its RECTANGLE contact configuration.
ICA-203-S-TG30
Robinson Nugent
IC SOCKET; Device Type Used On: DIP20; Housing Material: POLYESTER; Manufacturer Series: ICE; Additional Features: STANDARD: UL 94V-0; No. of Contacts: 20;
822472-3
Tyco Electronics Amp
IC SOCKET; Device Type Used On: PLCC32; Housing Material: PLASTIC; Manufacturer Series: 822472; JESD-609 Code: e0; Contact Finish (Mating): TIN LEAD;
2-1437539-9
TE Connectivity 2-1437539-9 is a DIP16 IC SOCKET with 16 contacts, rated at 3A current. It features a PCB contact row spacing of 7.62mm and rectangular contact pattern, suitable for applications requiring a mating contact pitch of 0.1 inch. The socket has a housing made of polyester and operates within -55 to 125°C temperature range, terminated by soldering with insulation resistance of 5G ohm.
5778
Pomona Electronics
IC SOCKET; Device Type Used On: PQFP132; Housing Material: PLASTIC; No. of Contacts: 132; Manufacturer Series: 5778;
RXZE2M114M
Schneider Electric Sa
RELAY SOCKET;
ICA-314-ZSTT
Samtec
Samtec's ICA-314-ZSTT is a DIP14 IC socket with 14 contacts, 7.62mm PCB row spacing, and rectangular contact pattern. It uses beryllium copper alloy for contacts and has a current rating of 1A. Ideal for applications requiring a chip carrier IC socket with solder termination and operating temperatures ranging from -65°C to 125°C.
MVAT-209-DG-17
IC SOCKET; Device Type Used On: PGA209; No. of Contacts: 209; Additional Features: PGA SOCKET; Contact Finish (Termination): GOLD; JESD-609 Code: e4;
110-43-308-41-001000
110-43-308-41-001000 by Mill-max Mfg is a DIP8 IC socket with 0.1" contact pitch, suitable for chip carrier ICs. Featuring polyethylene housing, matte tin over nickel termination, and 3A current rating, it operates b/w -55°C to 125°C. Ideal for applications requiring reliable connections in electronic devices.
304-13-142-41-770000
The Mill-max Mfg 304-13-142-41-770000 is a POLYETHYLENE chip carrier IC socket for SIP42 devices with 42 contacts. It features GOLD OVER NICKEL contact finish, RECTANGLE contact configuration, and is ideal for electronic applications requiring reliable connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Aptiv
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved