Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX2680AUT+T by Analog Devices is a RF/Microwave DOWN CONVERTER with 1.5 VSWR, LO Tunable, and 11.7 dB Noise Figure. It operates from -40 to 85 °C and has a 3V supply voltage, making it ideal for applications requiring high-performance RF signal conversion in various electronic systems.
Median Price
$3.270
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$3.030
100+ parts
$1.867
1k+ parts
$1.657
10k+ parts
$1.574
Mouser Electronics
$3.510
$2.190
$1.970
$1.890
DigiKey
$2.183
$2.066
$1.847
Rochester
-
$1.690
$1.510
$1.420
Digiode
$1.548
Vyrian
$1.630
Anansix
MARBEL Systems
$1.373
Semicontronic
$1.390
$1.355
$1.348
Corphita
$1.467
Texas Native Microelectronics
$1.578
$1.515
$1.468
$1.389
Kenton Components
$1.894
$1.666
Qasali Group International
$4.261
$3.962
$3.749
Authorized Procurement Solutions
Kepictronics
Lightweight and durable material, ideal for portable and rugged applications.
Ensures efficient power transfer with minimal signal loss.
High-quality construction for reliable performance and longevity.
Economical power requirement for energy-efficient operation.
Simplified connection setup for easy integration into systems.
Wide temperature range for versatile deployment in various environments.
Suitable for operation in extreme cold conditions.
Corrosion-resistant finish for enhanced durability.
Allows for flexibility in frequency tuning according to specific requirements.
Low power consumption for efficient use of energy.
Specifically designed for down conversion applications, providing accurate and reliable signal processing.
Supports a wide range of input frequencies for versatility.
Standard impedance value for compatibility with various systems.
Provides flexibility in intermediate frequency selection for customized signal processing.
High input frequency range for compatibility with a wide range of RF signals.
Low noise figure for clean signal output with minimal interference or distortion.
High intermediate frequency range for processing a wide range of signals.
Allows for easy and secure mounting on surfaces for convenient installation.
RF/Microwave Up/Down Converters MAX2680AUT+T attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
JESD-609 Code:
LO Tunable:
Mounting Feature:
Maximum Noise Figure:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Maximum RF Input Frequency:
Minimum RF Input Frequency:
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Kec
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Semiconductor Ag
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
MAX2118UTL+T
Maxim Integrated
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 40; Package Body Material: PLASTIC/EPOXY; Maximum RF Input Frequency: 2175 MHz; Characteristic Impedance: 30 ohm;
LTC5555IUFD#TRPBF
Analog Devices
LTC5555IUFD#TRPBF by Analog Devices is a RF/Microwave DOWN CONVERTER with 3.3V power supply, LO tunable feature, and 4.4 dB min down conversion gain. It operates in temperatures ranging from -40 to 105 °C and has a max noise figure of 24 dB. Ideal for applications requiring RF signal conversion in the frequency range of 1500-7000 MHz with a characteristic impedance of 50 ohm.
MAX2673EUA+T
Analog Devices' MAX2673EUA+T is an RF up converter with 400-2500 MHz output range, 7.8 dB gain, and 10.4 dB noise figure. Ideal for applications requiring high-frequency conversion in RF/microwave systems with a 50 ohm impedance requirement.
HMC815BLC5TR
Analog Devices' HMC815BLC5TR is an RF up converter with 21-27 GHz output frequency range, 7 dB min gain, and LO tunability. Ideal for applications requiring high-frequency conversion in RF/microwave systems. Operating temperature ranges from -40 to 85 °C, making it suitable for various environments.
HMC819LC5
Analog Devices' HMC819LC5 is an RF up converter with a frequency range of 17-23.6 GHz and gain of 11 dB. Ideal for applications requiring high-frequency conversion, it operates in temperatures from -40°C to 85°C and features LO tunability for versatile use.
LTC5544IUF#PBF
LTC5544IUF#PBF by Analog Devices is a CMOS RF/Microwave Up/Down Converter with 16 terminals, operating at 3.3V. It has a max supply current of 238mA and features matte tin terminal finish. Ideal for surface mount applications in various RF systems.
F1792NLGI8
Renesas Electronics
DOWN CONVERTER; JESD-609 Code: e3; Terminal Finish: TIN;
UPC1686G
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP8,.25;
UPC2757TB-A
DOWN CONVERTER; Maximum Noise Figure: 16 dB; Minimum Input Power (CW): 15 dBm; JESD-609 Code: e6; Maximum RF Input Frequency: 2000 MHz; Maximum Operating Temperature: 85 Cel;
UPC2753GR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 8.5 mA;
F1792NLGI
DOWN CONVERTER; Terminal Finish: TIN; JESD-609 Code: e3;
TRF1115IRGPTG3
TRF1115IRGPTG3 by Texas Instruments is a RF/Microwave DOWN CONVERTER with 16 dB Min. Down Conversion Gain, 2300-2700 MHz RF Input Frequency range, and 400-500 MHz IF. It operates at -40 to 85°C, requires 5V supply, and has a Noise Figure of max. 7 dB. Ideal for applications requiring high-performance RF signal conversion in various electronic systems.
MAX2682
MAX2682 by Analog Devices is an RF/Microwave DOWN CONVERTER with 14.7 dB Min Gain, 400-2500 MHz RF Input Frequency Range, and 10-500 MHz IF Range. It features LO Tuning capability and a Noise Figure of 6.5 dB. Ideal for applications requiring high-performance frequency conversion in communication systems.
MAX2663EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Noise Figure: 12.7 dB;
MAX2660EUT-T
MAX2660EUT-T by Maxim Integrated is a RF/Microwave Up/Down Converter with a max RF output frequency of 2500 MHz and a max voltage standing wave ratio of 2.2. It is commonly used in applications such as wireless communication systems and satellite receivers.
MAX2671
Analog Devices' MAX2671 is an RF up converter with 40-2500 MHz output frequency range, 11 dB gain, and 8 dB noise figure. Ideal for applications requiring up conversion from 10 MHz IF to 500 MHz IF, it features tunable LO and TIN LEAD finish.
MC44S803EP
UP/DOWN CONVERTER;
CMY200
Infineon Technologies
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Intermediate Frequency (IF): 40 MHz;
TRF1122IRTMRG3
TRF1122IRTMRG3 by Texas Instruments is an RF up converter with 2100-2700 MHz output frequency range, 20 dB min gain, and 185 mA max supply current. Ideal for applications requiring high-frequency conversion in wireless communication systems.
935263708518
UP/DOWN CONVERTER; Maximum RF Input Frequency: 2500 MHz; Minimum RF Input Frequency: 2400 MHz; Maximum Intermediate Frequency (IF): 400 MHz; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
MAX2671EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2671EUT+T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2682EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
MAX2682EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2660EUT+T
Analog Devices' MAX2660EUT+T is an RF up converter with 400-2500 MHz output range, 3.9 dB gain, and 11.9 dB noise figure. Ideal for applications requiring high-frequency conversion in RF/Microwave systems with impedance of 50 ohm and IF range of 40-500 MHz.
UP CONVERTER; Construction: COMPONENT; Maximum Noise Figure: 11.9 dB; Maximum Operating Temperature: 85 Cel; LO Tunable: NO; Minimum Operating Temperature: -40 Cel;
MAX2681EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum RF Input Frequency: 400 MHz;
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2681EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Down Conversion Gain: 6.7 dB;
MAX2682EUT+
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e3;
MAX2682EUT
MAX2682EUT by Maxim Integrated is a RF/Microwave DOWN CONVERTER with 1.5 VSWR, 8.7 dB Down Conversion Gain, and 50 ohm Impedance. It operates at -40 to 85°C, consumes 21.8 mA current, and supports RF input frequencies from 400 MHz to 2500 MHz. Ideal for applications requiring high-performance RF signal conversion in compact setups.
MAX2661
UP CONVERTER; Minimum Up Conversion Gain: 11 dB; Minimum Intermediate Frequency (IF): 10 MHz; Maximum RF Output Frequency: 2500 MHz; Terminal Finish: TIN LEAD; Maximum Noise Figure: 8 dB;
MAX2661EUT+T
UP CONVERTER; Maximum Noise Figure: 11.8 dB; Maximum Voltage Standing Wave Ratio: 2.2; Characteristic Impedance: 50 ohm; Maximum RF Output Frequency: 2500 MHz; Maximum Operating Temperature: 85 Cel;
MAX2661EUT+
UP CONVERTER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
MAX2106CCM
DOWN CONVERTER; JESD-609 Code: e0; Minimum RF Input Frequency: 925 MHz; Minimum Operating Temperature: 0 Cel; Maximum RF Input Frequency: 2175 MHz; Terminal Finish: TIN LEAD;
MAX2660
UP CONVERTER; Maximum Intermediate Frequency (IF): 500 MHz; JESD-609 Code: e0; Minimum Up Conversion Gain: 8 dB; LO Tunable: YES; Minimum Intermediate Frequency (IF): 10 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved