Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC1163LP5ETR is a VCO with 300 MHz/V modulation sensitivity, -87 dBc/Hz phase noise, and 11 dBm output power. Ideal for applications requiring precise frequency control in the range of 9650-10410 MHz, such as radar systems and communication equipment.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.361
$2.196
IDEA Electronic Components Group
$2.539
$2.412
DigiPath Technology Company
$3.961
$3.802
Semicontronic
$4.010
$3.910
$3.890
AZTECH Wire
$7.885
Ampacity Inc.
$42.760
Corphita
Allows for a higher supply voltage, providing stable operation and preventing damage to the oscillator.
High modulation sensitivity allows for precise frequency control, making it suitable for applications where frequency accuracy is crucial.
Efficient use of power with a relatively low current draw, making it energy-efficient.
Delivers a reasonable power output suitable for various RF applications.
Low phase noise ensures a clean and stable signal output, making it ideal for high-performance communication systems.
Capability to operate at relatively low frequencies, offering flexibility for different frequency requirements.
Capable of operating at high frequencies, suitable for applications that require a wide frequency range.
VCO Voltage Controlled Oscillators HMC1163LP5ETR attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Maximum Control Voltage:
Minimum Control Voltage:
Modulation Sensitivity:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Package Equivalence Code:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
HMC1163LP5ETR Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tesla Elektronicke Soucastky
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Micro Commercial Components
HMC586LC4B
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Offset Frequency: 10 kHz; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 8000 MHz;
HMC510LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 100 kHz; Terminal Finish: MATTE TIN; Phase Noise: -116 dBc/Hz;
HMC1169LP5E
Analog Devices
Analog Devices' HMC1169LP5E is a VCO with 5.25V max supply voltage, 350 MHz/V modulation sensitivity, and -86 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 12.92-14.07 GHz, such as radar systems and communication equipment.
MAX2753EUA+T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Additional Features: DIFFERENTIAL OUTPUT; JESD-609 Code: e3; Offset Frequency: 4000 kHz;
HMC515LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Minimum Control Voltage: 2 V; JESD-609 Code: e3;
MAOC-009266-TR0500
M/a-com Technology Solutions
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Additional Features: TAPE AND REEL; Physical Dimension: 5.0mm x 5.0mm x 0.9mm;
HMC582LP5TR
Analog Devices' HMC582LP5TR is a VCO with 32 terminals, operating from 11.1 GHz to 12.4 GHz. It features -110 dBc/Hz phase noise, output power of 5 dBm, and supports control voltages from 2V to 12V. Ideal for applications requiring precise frequency control in RF systems.
HMC431LP4
Analog Devices' HMC431LP4 is a VCO with -102 dBc/Hz phase noise, 27 mA supply current, and 3V nominal voltage. Ideal for applications requiring precise frequency control in the 5500-6100 MHz range. With compact dimensions of 4.1mm x 4.1mm x 1.0mm, it's suitable for surface mount installations in various electronic systems.
MAOC-009872-TR0500
MAOC-009872-TR0500 by M/a-com Tech: VCO with 5.25V max supply, 190 MHz/V modulation sensitivity, and -83 dBc/Hz phase noise. Ideal for RF applications requiring precise frequency control in the 11-12 GHz range.
VTO-0995-TO8
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Current: 100 mA; Output Power: 2 dBm; Physical Dimension: 12.7mm x 5.08mm; Modulation Sensitivity: 10 MHz/V;
LTC6992HS6-4#TRMPBF
LTC6992HS6-4#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz, and temp range of -40°C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC6475LC4BTR
Analog Devices' HMC6475LC4BTR is a VCO with 70mA supply current, 5dBm output power, and -106 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 3.9GHz to 7.5GHz, such as radar systems and wireless communication devices.
HMC735LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
HMC732LC4B
Analog Devices' HMC732LC4B is a VCO with modulation sensitivity of -85 MHz/V, output power of 1 dBm, and phase noise of -65 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 6-12 GHz, such as radar systems and communication equipment.
SN74LS626D3
Texas Instruments
Voltage Controlled Oscillators;
HTO-4000R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Supply Current: 100 mA; Maximum Operating Frequency: 8000 MHz; Maximum Operating Temperature: 85 Cel;
MAX2623EUA-T
MAX2623EUA-T by Maxim Integrated is a VCO with -101 dBc/Hz phase noise, 11.5 mA supply current, and -8 dBm output power. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 855 MHz to 950 MHz.
SN74LS624NSRE4
SN74LS624NSRE4 by Texas Instruments is a VCO with 14 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and operates at frequencies from 0.000001 MHz to 20 MHz. Ideal for applications requiring precise voltage-controlled oscillation in various temperature conditions.
HMC531LP5ETR
Analog Devices' HMC531LP5ETR is a VCO with 5.25V max supply voltage, 300mA max supply current, and 3dBm output power. Ideal for applications requiring precise frequency control in the range of 13.6-14.9GHz, such as radar systems and communication equipment.
HMC732LC4BTR
Analog Devices' HMC732LC4BTR is a VCO with modulation sensitivity of -85 MHz/V, output power of 1 dBm, and phase noise at -65 dBc/Hz. Ideal for applications requiring voltage-controlled oscillators in the frequency range of 6-12 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
HMC1164LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.25 V; Maximum Operating Frequency: 11300 MHz;
HMC1168LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Nominal Supply Voltage: 5 V; Additional Features: HALF O/P FREQUENCY ALSO AVAILABLE; Maximum Supply Current: 240 mA;
HMC1160LP5E
Analog Devices' HMC1160LP5E VCO offers 250 MHz/V modulation sensitivity, -90 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring a voltage-controlled oscillator with a frequency range of 8.45-9.3 GHz in compact surface-mount design.
HMC1166LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Supply Voltage: 4.75 V; Minimum Operating Temperature: -40 Cel; Minimum Control Voltage: 2 V;
HMC1166LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: -89 kHz; Maximum Operating Frequency: 12620 MHz; Minimum Operating Temperature: -40 Cel;
HMC1167LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Output Power: .0112 dBm; Phase Noise: -86 dBc/Hz;
HMC1161LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Modulation Sensitivity: 250 MHz/V; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Additional Features: HALF O/P FREQUENCY ALSO AVAILABLE;
HMC1163LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Modulation Sensitivity: 300 MHz/V; Maximum Supply Voltage: 5.25 V;
HMC1167LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 2 V; Modulation Sensitivity: 350 MHz/V; Terminal Finish: MATTE TIN;
HMC1168LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 10 kHz; Maximum Operating Frequency: 13720 MHz; Maximum Supply Current: 240 mA;
HMC1169LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 0.9mm; Minimum Operating Frequency: 12920 MHz; Maximum Operating Frequency: 14070 MHz;
HMC1161LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Additional Features: TR, 7 INCH; HALF O/P FREQUENCY ALSO AVAILABLE; Maximum Supply Current: 300 mA; Minimum Control Voltage: 2 V;
HMC1160LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Supply Voltage: 4.75 V; Maximum Supply Voltage: 5.25 V; Offset Frequency: 10 kHz;
HMC1162LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; JESD-609 Code: e3; Maximum Control Voltage: 13 V; Maximum Supply Voltage: 5.25 V;
HMC1165LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Maximum Supply Current: 280 mA; Minimum Supply Voltage: 4.75 V;
HMC1164LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; JESD-609 Code: e3; Output Power: 8 dBm; Physical Dimension: 5.1mm x 5.1mm x 1.0mm;
HMC1162LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Supply Current: 310 mA; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 5 V; Output Power: 11 dBm;
HMC1165LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Supply Current: 280 mA; Additional Features: TR, 7 INCH; HALF O/P FREQUENCY ALSO AVAILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved