Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC1169LP5E is a VCO with 5.25V max supply voltage, 350 MHz/V modulation sensitivity, and -86 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 12.92-14.07 GHz, such as radar systems and communication equipment.
Median Price
$45.560
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$36.960
100+ parts
$29.710
1k+ parts
$29.120
10k+ parts
-
Analog Devices Inc
$44.380
$34.320
$22.180
Mouser Electronics
$46.740
$38.620
Newark
$47.670
$37.860
$36.480
DigiKey
$51.410
$39.821
$38.017
Element14
$73.980
$57.210
$54.600
Verical
$28.584
Rochester
$33.230
$29.730
$27.980
Digiode
$30.495
Vyrian
Parana Technologies
$0.152
$0.141
IDEA Electronic Components Group
$0.163
$0.155
DigiPath Technology Company
$0.254
$0.244
Ampacity Inc.
$27.290
Semicontronic
$26.608
$26.471
Corphita
$28.890
Continental Prestige Electronics
$36.630
$29.700
Component Stockers USA
$42.680
$35.300
Lixinc
Allows for flexibility in power supply options and ensures stable operation within specified limits.
Provides precise control over frequency modulation, making it suitable for applications requiring high modulation sensitivity.
Efficient power consumption ensures long-term reliability and cost-effectiveness of the product.
Generates strong output power suitable for various communication and signal processing applications.
Standard supply voltage for compatibility with existing systems and easy integration.
Low phase noise ensures high signal purity and quality in communication and radar systems.
Specifically designed for voltage-controlled applications, providing precise frequency control.
Sufficient number of terminals for connecting to external circuits and components.
Compact size allows for easy integration into space-constrained systems and PCB designs.
Wide range of supply voltage support for operational flexibility and compatibility.
High operating temperature range ensures reliable performance in challenging environments.
Low minimum control voltage allows for precise frequency tuning and modulation control.
Wide range of operating temperatures makes it suitable for both indoor and outdoor applications.
High maximum control voltage range enables wide frequency tuning capabilities.
Allows for precise frequency offset adjustments for specific signal processing requirements.
High minimum operating frequency suitable for high-frequency communication and radar applications.
Surface mount design for easy and secure mounting on PCBs, saving space and facilitating mass production.
High maximum operating frequency for a wide range of applications requiring high-frequency signal generation.
VCO Voltage Controlled Oscillators HMC1169LP5E attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Additional Features:
Maximum Control Voltage:
Minimum Control Voltage:
Modulation Sensitivity:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
HMC1169LP5E Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Lite-on Semiconductor
EU2B-YS3103F
Idec
ROTARY SWITCH;
Weitron Technology
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LM358N
Samsung
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HMC531LP5
Analog Devices
Analog Devices' HMC531LP5 is a VCO with 5.25V max supply voltage, -110 dBc/Hz phase noise, and 3 dBm output power. Ideal for applications requiring precise frequency control in the range of 13.6-14.9 GHz, such as radar systems and communication equipment.
POS-400
Mini-circuits
Mini-circuits POS-400 VCO offers 16.9 MHz/V modulation sensitivity, 9.5 dBm output power, and -76 dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator with a frequency range of 200 MHz to 380 MHz in a compact form factor of 20.32mm x 10.16mm x 7.87mm.
HMC512LP5TR
Analog Devices' HMC512LP5TR is a VCO with max supply voltage of 5.25V, output power of 3dBm, and phase noise at -110 dBc/Hz. Ideal for applications requiring a Voltage Controlled Oscillator in the frequency range of 9.6-10.8GHz, such as radar systems or communication equipment.
HMC515LP5
Voltage Controlled Oscillators;
LNO-550
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -54 Cel; Maximum Operating Frequency: 775 MHz; Modulation Sensitivity: 45 MHz/V;
MTO-8950R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Nominal Supply Voltage: 15 V; Power Variation: 2.5 dB; Minimum Control Voltage: 2.5 V;
LTC6992HS6-1#TRPBF
LTC6992HS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, suitable for applications requiring precise voltage-controlled oscillation in compact designs.
HTO-2000R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Phase Noise: -87 dBc/Hz; Nominal Supply Voltage: 15 V; Minimum Operating Frequency: 2000 MHz;
HMC735LP5
SN74LS626D3
MAX2750AUA+T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Terminal Finish: MATTE TIN; Package Equivalence Code: TSSOP8,.19; Offset Frequency: 4000 kHz;
MAX2752EUA+T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Modulation Sensitivity: 170 MHz/V; Output Power: -3 dBm;
LTC6992HS6-4#WTRPBF
LTC6992HS6-4#WTRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and operates in temperatures from -40 °C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
SN74LS325J-00
HTO-12000
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Minimum Operating Temperature: -54 Cel; Maximum Operating Frequency: 18000 MHz; Power Variation: 2.5 dB; Minimum Control Voltage: 1 V;
HMC1168LP5ETR
Analog Devices' HMC1168LP5ETR is a VCO with 10 dBm output power, -85 dBc/Hz phase noise, and 32 terminals. It operates b/w 12470-13720 MHz frequencies, ideal for RF applications requiring precise frequency control in the range of 4.75-5.25 V supply voltage and -40 to 85 °C temperature conditions.
LTC6992IS6-1#WTRPBF
LTC6992IS6-1#WTRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and operates in temperatures from -40°C to 85°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC430LP4
Analog Devices' HMC430LP4 is a VCO with 24 terminals, operating at 5-5.5 GHz range. It features -103 dBc/Hz phase noise, 27 mA supply current, and -1 dBm output power. Ideal for applications requiring precise frequency control in compact designs.
ROS-2650+
ROS-2650+ by Mini-circuits is a VCO with modulation sensitivity of 36 MHz/V, output power of 5 dBm, and phase noise of -75 dBc/Hz. It operates at frequencies b/w 2165-2650 MHz and is ideal for applications requiring precise voltage-controlled oscillation in compact electronic systems.
HMC534LP5E
Analog Devices' HMC534LP5E is a VCO with 5.25V max supply voltage, 380mA max supply current, and 9dBm output power. Ideal for applications requiring -110 dBc/Hz phase noise, such as RF communication systems or radar equipment. Operating freq range: 10.6-11.8 GHz, control voltage range: 2-12V, and temp range: -40 to +85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
HMC1164LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.25 V; Maximum Operating Frequency: 11300 MHz;
HMC1168LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Nominal Supply Voltage: 5 V; Additional Features: HALF O/P FREQUENCY ALSO AVAILABLE; Maximum Supply Current: 240 mA;
HMC1160LP5E
Analog Devices' HMC1160LP5E VCO offers 250 MHz/V modulation sensitivity, -90 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring a voltage-controlled oscillator with a frequency range of 8.45-9.3 GHz in compact surface-mount design.
HMC1166LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Supply Voltage: 4.75 V; Minimum Operating Temperature: -40 Cel; Minimum Control Voltage: 2 V;
HMC1166LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: -89 kHz; Maximum Operating Frequency: 12620 MHz; Minimum Operating Temperature: -40 Cel;
HMC1167LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Output Power: .0112 dBm; Phase Noise: -86 dBc/Hz;
HMC1161LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Modulation Sensitivity: 250 MHz/V; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Additional Features: HALF O/P FREQUENCY ALSO AVAILABLE;
HMC1163LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Modulation Sensitivity: 300 MHz/V; Maximum Supply Voltage: 5.25 V;
HMC1167LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 2 V; Modulation Sensitivity: 350 MHz/V; Terminal Finish: MATTE TIN;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 10 kHz; Maximum Operating Frequency: 13720 MHz; Maximum Supply Current: 240 mA;
HMC1163LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Control Voltage: 13 V; Nominal Supply Voltage: 5 V; Minimum Operating Frequency: 9650 MHz;
HMC1169LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 0.9mm; Minimum Operating Frequency: 12920 MHz; Maximum Operating Frequency: 14070 MHz;
HMC1161LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Additional Features: TR, 7 INCH; HALF O/P FREQUENCY ALSO AVAILABLE; Maximum Supply Current: 300 mA; Minimum Control Voltage: 2 V;
HMC1160LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Supply Voltage: 4.75 V; Maximum Supply Voltage: 5.25 V; Offset Frequency: 10 kHz;
HMC1162LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; JESD-609 Code: e3; Maximum Control Voltage: 13 V; Maximum Supply Voltage: 5.25 V;
HMC1165LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Maximum Supply Current: 280 mA; Minimum Supply Voltage: 4.75 V;
HMC1164LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; JESD-609 Code: e3; Output Power: 8 dBm; Physical Dimension: 5.1mm x 5.1mm x 1.0mm;
HMC1162LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Supply Current: 310 mA; Maximum Operating Temperature: 85 Cel; Nominal Supply Voltage: 5 V; Output Power: 11 dBm;
HMC1165LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Supply Current: 280 mA; Additional Features: TR, 7 INCH; HALF O/P FREQUENCY ALSO AVAILABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved