Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADA4303-2ACPZ-RL by Analog Devices is a 75 ohm RF splitter with 12 terminals, operating from 0 to 1700 MHz. It has a max supply current of 90 mA and can withstand temperatures from -40 to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
Median Price
$1.380
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.230
10k+ parts
$1.160
Analog Devices Inc
$1.100
$1.909
Verical
$1.457
Digiode
$1.349
Vyrian
Q Components
Corohmni
$0.971
Corphita
$1.278
Component Stockers USA
$1.450
$1.360
$1.220
Parana Technologies
$1.998
$1.858
IDEA Electronic Components Group
$2.148
$2.041
Advanced Electronics
$2.465
$2.243
$2.021
Semicontronic
$2.630
$2.564
$2.551
DigiPath Technology Company
$3.351
$3.217
AZTECH Wire
$12.520
$12.020
$11.780
$11.550
Native Components
Northwest PG Solutions
The use of plastic/epoxy material in the construction of the package body makes the product lightweight and durable.
Operating at a low voltage of 5V makes the product energy efficient and suitable for various power supply setups.
Having 12 terminals allows for multiple connection options, making the product versatile in various setups.
With a maximum operating temperature of 85°C, the product can withstand high temperatures, ensuring reliable performance.
The product can operate in extremely cold temperatures down to -40°C, making it suitable for a wide range of environments.
Being a splitter, the product allows for the division of an input signal into multiple output signals, facilitating signal distribution in RF/Microwave systems.
With a high maximum operating frequency of 1700 MHz, the product is capable of handling high-frequency signals, making it suitable for advanced communication systems.
RF/Microwave Splitter/Combiners ADA4303-2ACPZ-RL attributes and parameters. Explore more RF/Microwave Splitter/Combiners devices from Analog Devices
Characteristic Impedance:
Construction:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Terminal Finish:
ADA4303-2ACPZ-RL RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Other - Multiple Changes 13/Feb/2014
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Telefunken Microelectronics
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
4142
Spectrum Control
SPLITTER; Maximum Input Power (CW): 33.01 dBm; Construction: COAXIAL; Maximum Insertion Loss: .4 dB; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 8000 MHz;
MAX9988ETP+
Maxim Integrated
SPLITTER; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
Api Technologies
4142 by Api Technologies is a COAXIAL RF/Microwave SPLITTER with max input power of 33.01 dBm and VSWR of 1.35. It operates b/w 4-8 GHz, offering low insertion loss at 0.4 dB, ideal for signal splitting in high-frequency applications.
ZX10R-14-S+
Mini-circuits
ZX10R-14-S+ by Mini-circuits is a RF/Microwave Combiner with max input power of 22.04 dBm and VSWR of 1.26. It operates from -40 to 85°C, has max insertion loss of 1.8 dB, and covers frequencies from 0-10000 MHz. Ideal for RF signal combining applications.
HMC-C007
Analog Devices
Analog Devices' HMC-C007 is a 50 ohm RF splitter with max input power of 13.01 dBm, operating from 500 MHz to 18 GHz. Constructed coaxially with gold finish, it's ideal for RF/Microwave applications in temperatures ranging from -55°C to 85°C.
PB-5
Pulsar Microwave
SPLITTER;
GP2Y+
The Mini-circuits GP2Y+ is a RF/Microwave Splitter/Combiner with max input power of 31.76 dBm and VSWR of 1.2. Featuring 12 terminals, it operates from -40 to 85°C, with insertion loss of 1.5 dB. Ideal for applications requiring high isolation and frequency range from 1600-3300 MHz in surface mount setups.
JSPQ-350
The Mini-circuits JSPQ-350 RF/Microwave Combiner has a max input power of 30 dBm, VSWR of 1.27, and max insertion loss of 1 dB. Ideal for combining RF signals in applications requiring frequencies b/w 150 MHz to 350 MHz with a characteristic impedance of 50 ohms.
SBTC-2-10L+
Mini-circuits SBTC-2-10L+ is a 50 ohm RF combiner with max input power of 26.99 dBm and VSWR of 1.17. Operating from -40 to 85 °C, it offers low insertion loss (1.4 dB) for frequencies b/w 5 MHz to 1000 MHz, ideal for RF/Microwave applications.
RAD-ISM-900-ANT-4
Phoenix Contact
SPLITTER; Maximum Operating Frequency: 928 MHz; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 1 dB; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
MAPD-008072-ESSM26
Tyco Electronics M/a-com
COMBINER; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 5 MHz;
LRPS-2-11+
LRPS-2-11+ by Mini-circuits is an RF/Microwave Combiner with max input power of 30 dBm, VSWR of 1.98, and max insertion loss of 1.5 dB. Ideal for combining RF signals in applications requiring a characteristic impedance of 50 ohms, operating b/w frequencies of 20 MHz to 2000 MHz with a wide temperature range from -40°C to 85°C.
MAX9987ETP-T
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Power Supplies (V): 5;
WP4S+
WP4S+ by Mini-circuits is a RF/Microwave Combiner with 1.8 dB max insertion loss, 16 dB min isolation, and 50 ohm impedance. It operates from 3400 MHz to 4600 MHz, ideal for high-frequency signal combining in various applications like telecommunications and wireless systems.
QCN-19
Mini-circuits QCN-19 is a RF/Microwave Combiner with 6 terminals, 50 ohm impedance, and 1.2 VSWR. It operates from 1100 MHz to 1925 MHz, with max insertion loss of 0.9 dB and min isolation of 19 dB. Ideal for surface mount applications in high-power environments up to 41.76 dBm.
ADA4304-4ACPZ-R7
ADA4304-4ACPZ-R7 by Analog Devices is a 16-terminal RF splitter with 5V power supply, operating from -40 to 85°C. With characteristic impedance of 75Ω, it supports frequencies from 54MHz to 865MHz. Ideal for RF/Microwave applications requiring surface mount components.
ADA4302-4ACPZ-RL7
ADA4302-4ACPZ-RL7 by Analog Devices is a 75 ohm RF splitter with 20 terminals, operating from 54 MHz to 865 MHz. It has a max supply current of 240 mA and operates b/w -40 °C to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
ADP-2-20
The Mini-circuits ADP-2-20 is a RF/Microwave splitter/combiner with max input power of 30 dBm, VSWR of 2.01, and max insertion loss of 1.5 dB. Ideal for applications requiring a component with characteristic impedance of 50 ohm, min isolation of 15 dB, and operating frequency range from 20 MHz to 2000 MHz.
6014-3
Cobham Plc
Cobham Plc's 6014-3 RF/Microwave Splitter/Combiner has a max input power of 30 dBm, VSWR of 1.2, and operates from -65°C to 125°C. With a frequency range of 0-6000 MHz and impedance of 50 ohm, it is ideal for signal splitting in various RF/microwave applications.
MAX9987EGP
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADA4304-4ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Terminal Finish: Matte Tin (Sn);
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 75 ohm; Construction: COMPONENT;
ADA4303-2ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
ADA4302-4ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 54 MHz;
ADA4304-3ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
ADA4302-4ACPZ-R21
ADA4304-4ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
ADA4302-4ACP-RL7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 240 mA; JESD-609 Code: e0;
ADA4304-2ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Power Supplies (V): 5;
ADA4302-4ACPZ-RL1
ADA4304-2ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Power Supplies (V): 5;
ADA4304-3ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 54 MHz; Maximum Supply Current: 105 mA;
ADA4302-4ACPZ-RL71
ADA4304-2ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Construction: COMPONENT;
ADA4303-2ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz;
ADA4302-4ACP-REEL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel;
ADA4302-4ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 240 mA; Package Equivalence Code: LCC20,.16SQ,20;
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
ADA4304-3ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved