Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADA4303-2ACPZ-R7 by Analog Devices is a 75 ohm RF splitter with 12 terminals, operating from 0 to 1700 MHz. It has a max supply current of 90 mA and can handle temperatures from -40 to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
Median Price
$1.380
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$3.300
100+ parts
-
1k+ parts
$1.100
10k+ parts
$1.628
Rochester
$1.230
$1.160
Verical
$1.361
Digiode
$1.349
Vyrian
Parana Technologies
$0.777
$0.722
IDEA Electronic Components Group
$0.835
$0.793
Semicontronic
$1.210
$1.180
$1.174
Corphita
$1.278
DigiPath Technology Company
$1.303
$1.250
AZTECH Wire
$16.260
Native Components
$20.978
Northwest PG Solutions
$23.076
$20.768
RC Electronics
$1.960
$1.770
$1.720
A-Z Elektronik GmbH
This material is lightweight and durable, making the product easy to handle and long-lasting.
Component construction simplifies the design and integration of the product into various systems.
Operating at a low voltage of 5V reduces power consumption and heat generation, making it energy efficient.
Having 12 terminals allows for versatile connectivity options and the ability to handle multiple input/output signals.
The high maximum operating temperature ensures the product can withstand challenging environmental conditions without performance degradation.
The low minimum operating temperature allows the product to function reliably in cold environments.
The matte tin finish provides good electrical conductivity and solderability for reliable connections.
With a maximum supply current of 90mA, the product ensures efficient power utilization and minimal energy waste.
Being a splitter enables the product to divide RF or microwave signals into multiple paths, enhancing signal distribution capabilities.
The 75 ohm characteristic impedance is ideal for compatibility with various RF/microwave systems, ensuring efficient signal transfer.
The ability to operate at 0 MHz allows the product to handle a wide range of frequencies, making it versatile in different applications.
The surface mount feature simplifies installation and integration into circuit boards, saving time and effort in production.
The high maximum operating frequency of 1700 MHz enables the product to handle a wide range of RF/microwave signals with accuracy and precision.
RF/Microwave Splitter/Combiners ADA4303-2ACPZ-R7 attributes and parameters. Explore more RF/Microwave Splitter/Combiners devices from Analog Devices
Characteristic Impedance:
Construction:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Terminal Finish:
ADA4303-2ACPZ-R7 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Other - Multiple Changes 13/Feb/2014
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Fairchild Semiconductor
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
ADA4302-4ACPZ-R21
SPLITTER;
MAX9988EGP
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum Input Power (CW): 20 dBm;
4142
Filtronic Solid State
SPLITTER; Maximum Insertion Loss: .4 dB; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 8000 MHz; Maximum Input Power (CW): 33.01 dBm; Construction: COAXIAL;
ADA4302-4ACPZ-RL1
MAX9987ETP-T
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Power Supplies (V): 5;
ADP-2-20+
Mini-circuits
Mini-circuits ADP-2-20+ is a RF/Microwave splitter/combiner with 6 terminals, 50 ohm impedance, and 1.5 dB insertion loss. It operates from 20 MHz to 2000 MHz, offering max CW input power of 30 dBm. Ideal for applications requiring high isolation and surface mounting feature.
JPS-2-1W+
JPS-2-1W+ by Mini-circuits is an RF/Microwave Splitter/Combiner with a max input power of 30 dBm and VSWR of 1.1. It operates b/w -40 to 85°C, has a max insertion loss of 1.4 dB, and supports frequencies from 3 MHz to 750 MHz. Ideal for RF signal splitting and combining applications.
LRPS-2-11+
LRPS-2-11+ by Mini-circuits is an RF/Microwave Combiner with max input power of 30 dBm, VSWR of 1.98, and max insertion loss of 1.5 dB. Ideal for combining RF signals in applications requiring a characteristic impedance of 50 ohms, operating b/w frequencies of 20 MHz to 2000 MHz with a wide temperature range from -40°C to 85°C.
ADA4303-2ACPZ-RL
ADA4303-2ACPZ-RL by Analog Devices is a 75 ohm RF splitter with 12 terminals, operating from 0 to 1700 MHz. It has a max supply current of 90 mA and can withstand temperatures from -40 to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
58247-3
Commscope
SPLITTER; Maximum Voltage Standing Wave Ratio: 1.1; Maximum Insertion Loss: 10 dB; Maximum Operating Frequency: 2300 MHz; Minimum Operating Frequency: 2100 MHz;
1591
Cobham Plc
1591 by Cobham Plc is a RF/Microwave Splitter/Combiner with max input power of 33.01 dBm and VSWR of 1.35. Constructed coaxially, it operates b/w -55 to 125 °C, ideal for applications requiring a 50 ohm impedance, from 0-2000 MHz frequency range.
ADAR5000ACBZ-R7
SPLITTER AND COMBINER;
1870
Aeroflex/weinschel
SPLITTER; Maximum Input Power (CW): 30 dBm; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 7.5 dB; Minimum Operating Frequency: 0 MHz;
DS-113
Tyco Electronics M/a-com
SPLITTER; Maximum Insertion Loss: .75 dB; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 400 MHz; Maximum Operating Temperature: 85 Cel;
ADP-2-20
The Mini-circuits ADP-2-20 is a RF/Microwave splitter/combiner with max input power of 30 dBm, VSWR of 2.01, and max insertion loss of 1.5 dB. Ideal for applications requiring a component with characteristic impedance of 50 ohm, min isolation of 15 dB, and operating frequency range from 20 MHz to 2000 MHz.
MAX9988ETP+
SPLITTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;
ADA4303-2ACPZ-R2
ADA4303-2ACPZ-R2 by Analog Devices is a 75 ohm RF splitter with 12 terminals, operating from 0 to 1700 MHz. It has a max supply current of 90 mA and can handle temperatures from -40 to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
MAX9987ETP+
SPLITTER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ADA4304-3ACPZ-R2
ADA4304-3ACPZ-R2 by Analog Devices is a 16-terminal RF splitter with characteristic impedance of 75 ohm. It operates from -40 to 85 °C, suitable for frequencies ranging from 54 MHz to 865 MHz. The device has a max supply current of 105 mA and is designed for surface mount applications in RF/Microwave systems.
PD0922J5050S2HF
Anaren
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Voltage Standing Wave Ratio: 1.67; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2150 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADA4304-4ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Terminal Finish: Matte Tin (Sn);
ADA4304-4ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 75 ohm; Construction: COMPONENT;
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
ADA4302-4ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 54 MHz;
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 1700 MHz; Package Equivalence Code: LCC12,.12SQ,20;
ADA4304-3ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
ADA4304-4ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
ADA4302-4ACP-RL7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 240 mA; JESD-609 Code: e0;
ADA4304-2ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Power Supplies (V): 5;
ADA4304-2ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Power Supplies (V): 5;
ADA4304-3ACPZ-R7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 54 MHz; Maximum Supply Current: 105 mA;
ADA4302-4ACPZ-RL71
ADA4304-2ACPZ-RL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Construction: COMPONENT;
ADA4302-4ACP-REEL
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel;
ADA4302-4ACPZ-R2
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 240 mA; Package Equivalence Code: LCC20,.16SQ,20;
ADA4302-4ACPZ-RL7
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved