Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD734SQ/883B by Analog Devices is a MILITARY-grade ANALOG MULTIPLIER OR DIVIDER with 40 kHz bandwidth. It operates at -55 to 125 °C, with +-15 V power supplies and 14 terminals. Ideal for applications requiring high precision analog computations in harsh environments.
Median Price
$208.370
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
-
1k+ parts
$120.130
10k+ parts
Freelance Electronics
$77.601
Digiode
$89.262
TEDSS.com
$99.980
Nova Conductors
$119.040
Forefront Electronics and Design
$171.500
Vyrian
Chip Stock
Quantum Digital Technology
Cyclops Electronics Ltd
Astute Electronics Inc
Classic Components Corporation
VNN
Beltway Electronics Company
North Shore Components
Electronics Depot
Microfarads
Bristol Electronics
Parana Technologies
$5.716
$5.316
IDEA Electronic Components Group
$6.146
$5.839
DigiPath Technology Company
$9.588
$9.204
AZTECH Wire
$9.893
Corphita
$84.564
Netroflash
Ampacity Inc.
$154.010
Microchip USA
$382.335
Lixinc
Glotronic Ltd.
Authorized Procurement Solutions
Provides excellent protection and reliability, making the product suitable for harsh environments.
Optimal voltage level for efficient performance and stable operation.
Can withstand high temperatures, ensuring durability and versatility.
Bipolar technology offers high precision and accuracy in analog computations.
High bandwidth allows for quick and accurate calculations in analog multiplication or division tasks.
Analog Computational AD734SQ/883B attributes and parameters. Explore more Analog Computational devices from Analog Devices
Other IC type:
Nominal Bandwidth:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
Maximum Negative Input Voltage:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Positive Input Voltage:
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
AD734SQ/883B Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - TeamQuest 10/Jun/2016
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LM358MX
Onsemi
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech Electronics
5962-89809012A
Analog Devices
Analog Devices' 5962-89809012A is a MILITARY-grade Analog Computational IC with 2 functions, operating at -55 to 125 °C. It features a BIPOLAR technology, 60 kHz bandwidth, and +-15 V supply voltage range. Ideal for applications requiring high precision analog multiplication or division in harsh environments.
SA575DTBR2G
SA575DTBR2G by Onsemi is an analog computational IC with 2 functions. It operates at a nominal voltage of 5V and has a small outline, thin profile package style. It is commonly used in industrial applications requiring companding capabilities.
759P
The Analog Devices 759P is an Analog Computational IC with a package style of IN-LINE. It operates at a nominal voltage of +-15V and has a max operating temperature of 85°C. Ideal for applications requiring LOG OR ANTILOG AMPLIFIER functions in various electronic circuits.
LOG2112AIDWRE4
Texas Instruments
LOG2112AIDWRE4 by Texas Instruments is an Analog Computational IC with 16 terminals, operating voltage of +-5V, and temperature range from -40 to 85°C. It serves as a LOG or ANTILOG AMPLIFIER in industrial applications requiring precise signal processing within a compact 10.3mm x 7.5mm package.
AD834JRZ-REEL7
AD834JRZ-REEL7 by Analog Devices is an 8-terminal analog computational IC with a supply voltage range of 4V to 9V. It operates in temperatures from 0 °C to 70°C, offering a bandwidth of 500 kHz. Ideal for applications requiring analog multiplication or division functions in commercial-grade environments.
AD641APZ
AD641APZ by Analog Devices is a 20-terminal analog computational chip carrier with a nominal bandwidth of 250 kHz. It operates at temperatures ranging from -40 to 85 °C and supports supply voltages of +-5 V. Ideal for industrial applications, it features a bipolar technology and can handle negative input voltages up to -0.3 V.
SA575DR2G
SA575DR2G by Onsemi is a 20-terminal analog computational IC with dual terminal position and compander type. It operates b/w -40 to 85°C, with supply voltage ranging from 3V to 7V. With a bandwidth of 0.02 kHz, it's ideal for industrial applications requiring small outline packages and low power consumption.
AD530KCHIPS
AD530KCHIPS by Analog Devices is an analog computational IC with +-15V power supplies. It operates b/w 25-70°C, consumes 6mA max supply current, and uses bipolar technology. Ideal for applications requiring analog multiplication or division functions at a nominal voltage of ±15V.
AD8304ARU
AD8304ARU by Analog Devices is a 14-terminal IC with 5V supply voltage, operating from -40 to 85°C. It functions as a log or antilog amplifier with a nominal bandwidth of 10 kHz. Ideal for industrial applications requiring precise analog computational capabilities in a compact, surface-mount package.
M38510/13901BIA
Analog Devices' M38510/13901BIA is a MILITARY-grade BIPOLAR Analog Computational IC with +-15V supplies, 1 kHz bandwidth, and 10 terminals. It operates in temperatures from -55 to 125 °C and is ideal for ANALOG MULTIPLICATION/DIVISION applications.
AD8307ARZ-REEL7
AD8307ARZ-REEL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 2.7V to 5.5V, operating from -40°C to 85°C. It functions as a log or antilog amplifier with a bandwidth of 490kHz, ideal for industrial applications requiring precise signal computation in compact spaces.
AD8310ARMZ
AD8310ARMZ by Analog Devices is a small outline, thin profile analog computational IC with 8 terminals and a supply voltage range of 2.7V to 5.5V. It operates in industrial temperatures from -40°C to 85°C, featuring a nominal bandwidth of 440 kHz for log or antilog amplifier applications. The package is square-shaped, surface-mountable, with matte tin finish and gull wing terminals.
AD534LD/+
AD534LD/+ by Analog Devices is an Analog Computational IC with 14 terminals, +-15V power supplies, and 15V nominal voltage. It is a bipolar technology IC used as an analog multiplier or divider in commercial temperature grade applications.
TL441CJ4
TL441CJ4 by Texas Instruments is an Analog Computational IC with ±6V power supplies. It features a 16-terminal IN-LINE package, operating from 0 to 70°C. Ideal for LOG or ANTILOG AMPLIFIER applications due to its BIPOLAR technology and dual terminal position.
LOG104AIDR
The Texas Instruments LOG104AIDR is an Analog Computational IC with 8 terminals, operating at ±5V supplies. It features a bandwidth of 0.01 kHz and can handle supply voltages up to ±18V. Ideal for applications requiring log or antilog amplification in commercial extended temperature environments.
SA572NG
SA572NG by Onsemi is an Analog Computational IC with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 6-22V and consumes up to 6.3mA. Ideal for industrial applications requiring bipolar technology in a compact rectangular package.
AD534JD
AD534JD by Analog Devices is an Analog Computational IC with 14 terminals, operating at ±15V supplies. It features a bandwidth of 1 kHz and can handle input voltages up to ±10V. Ideal for applications requiring analog multiplication or division functions in commercial temperature environments.
AD633JRZ
AD633JRZ by Analog Devices is an 8-terminal analog computational IC with a nominal voltage of +-15V. It operates in temperatures ranging from 0 to 70°C and has a nominal bandwidth of 1 kHz. Ideal for applications requiring analog multiplication or division, this small outline package IC is surface mountable and features bipolar technology.
AD734SCHIPS
AD734SCHIPS by Analog Devices is a 14-terminal analog computational chip with a nominal voltage of ±15V. It operates in temperatures ranging from -55 to 125 °C, making it suitable for military-grade applications. With a bandwidth of 40 kHz, it functions as an analog multiplier or divider in surface-mount configurations.
AD8306ARZ
AD8306ARZ by Analog Devices is a 16-terminal IC with a supply voltage range of 2.7V to 6.5V and bandwidth of 395 kHz. It functions as a log or antilog amplifier in industrial settings, operating b/w -40°C to 85°C. The small outline package makes it suitable for surface mount applications requiring precise analog computational capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD734BNZ
AD734BNZ by Analog Devices is an analog computational IC with 14 terminals, operating at -40 to 85 °C. It has a bandwidth of 40 kHz and supports supply voltages of +-15 V. Ideal for industrial applications requiring analog multiplication or division functions.
AD734ANZ
AD734ANZ by Analog Devices is an analog computational IC with 14 terminals, operating at -40 to 85 °C. It features a nominal bandwidth of 40 kHz and operates on +-15 V supplies. Ideal for industrial applications requiring analog multiplication or division functions.
AD734AN
AD734AN by Analog Devices is an analog computational IC with 14 terminals, operating at -40 to 85 °C. It has a nominal bandwidth of 40 kHz and operates on +-15 V supplies. Widely used in industrial applications for analog multiplication or division tasks.
AD734AQ
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AD734BN
AD734BQ
AD734SCHIP
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: DIE; Package Shape: UNSPECIFIED; Surface Mount: YES;
AD734SQ
ANALOG MULTIPLIER OR DIVIDER; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved