Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: GOLD (50) OVER NICKEL (50); JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE;
Median Price
$2.190
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.120
100+ parts
$2.367
1k+ parts
$1.931
10k+ parts
$1.724
Mouser Electronics
$2.170
$1.880
-
Newark
$3.840
$3.020
$2.590
TTI Europe
$1.772
$1.433
Verical
$2.470
$2.275
Master Electronics
$1.900
$1.680
Farnell
$1.834
Element14
$1.911
IBS Electronics
$2.566
TME
$2.220
Electro Sonic
$1.800
$1.610
NAC Semi
$3.740
$3.400
Bristol Electronics
Atlantic Semiconductor
Q Components
Gateway Technologies
$3.000
$2.669
Singapore Electronics
$3.300
$3.068
$2.936
$2.804
Perfect Parts
GreenTree Electronics
Abacus Technologies
Continental Prestige Electronics
$4.000
$2.780
Eastek
Authorized Procurement Solutions
Telecom & Datacom Connectors RJE73-188-00440 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
RJE73-188-00440 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
ABS25-32.768KHZ-T
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Kingwell Technonlogy
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
Weitron Technology
2301996-3
TE Connectivity 2301996-3 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and board lock mounting. It operates b/w -40°C to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring right-angle board mounting.
5607-5102-SH
3m Electronic Products Division
The 3m Electronic Products Division 5607-5102-SH is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. It is used for board mounting with split board lock option, suitable for commercial applications in telecommunications and data communication systems.
RJHSE-5080-04
Amphenol
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
UX60SC-MB-5S8(80)
Hirose Electric
The Hirose Electric UX60SC-MB-5S8(80) is a USB connector with 5 contacts, rated at 1A signal current. Featuring a dielectric voltage of 100VAC and insulation resistance of 100MΩ, it's ideal for telecom/datacom applications. With a durable design lasting up to 5000 cycles, this right-angle mount connector has a shell finish of TIN and insulator material made from synthetic resin.
ARJE-0025
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1-2305018-2
TE Connectivity 1-2305018-2 USB Connector with Polyethylene insulator, solder hold down board mounting, and nickel shell finish. Rated for 5A signal current, UL94V-0 flammability code, and 10000 cycle durability. Ideal for telecom & datacom applications requiring surface mount termination in a right-angle receptacle design.
5555162-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 8; Mixed Contacts: NO;
MP1010RX-1000K
Kycon
Kycon's MP1010RX-1000K is a Telecom & Datacom Connector with 10 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500M ohm, and contact material made of copper alloy. Ideal for wire and stranded cable connections in commercial applications with operating temperatures ranging from -55 to 85°C.
1-1734035-2
TE Connectivity 1-1734035-2 USB Connector features Glass Filled Polyamide9T insulator, Nickel finish, and 0.8mm terminal pitch. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and rated current of 1A.
PX0443
Bulgin
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
67298-3090
Molex
The Molex 67298-3090 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator and tin plating. It has 8 contacts, right-angle mounting, solder termination, and is suitable for telecom/datacom applications. The connector is UL94V-0 rated, with a stainless steel shell and locking mounting option.
SS-6488S-A-NF-01-M07
Bel Fuse
Bel Fuse SS-6488S-A-NF-01-M07 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 2.54mm PCB contact row spacing, and NICKEL/TIN shell finish. It has 8 contacts for right angle mounting on boards or panels, suitable for commercial applications requiring UL 94V-0 flammability code compliance.
5520425-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: TOP ENTRY; Termination Type: SOLDER; Manufacturer Series: 5520425;
1-2007394-5
TE Connectivity 1-2007394-5 is a Telecom & Datacom Connector with 8 ports, 160 contacts, and UL 94V-0 flammability rating. It operates b/w -55°C to 105°C, suitable for board mounting applications requiring press fit termination at 0.118" terminal length.
67803-8020
Molex 67803-8020 USB connector with 5 contacts, 0.39"x.157"x.354" dimensions, and GLASS FILLED POLYAMIDE insulator is ideal for telecom/datacom applications. Features include TIN termination finish, solder holding flange for board mounting, and 30u plating thickness. Operating temp range: 0-50°C.
5558342-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Board Mounting Option: PEG; Shell Material: COPPER ALLOY; Insulator Material: POLYAMIDE;
2171790001
Molex 2171790001 USB connector features 16 contacts, POLYAMIDE insulator, and NICKEL finish. With a rated current of 1.25A, it is ideal for telecom & datacom applications. Operating temperature range from -40 to 85°C makes it suitable for various environments.
54819-1572
54819-1572 by Molex is a USB connector with 5 contacts, 0.39" body length, and 0.156" body width. It features liquid crystal polymer insulation material and tin termination finish. Ideal for telecom/datacom applications, it offers 5000 cycle durability and operates b/w 0-50°C temperature range.
555153-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: TELCOM, MODULAR; Board Mounting Option: SPLIT BOARD LOCK; Empty Shell: NO;
2171830001
TELECOM AND DATACOM CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved