Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Body Length: .631 inch; Mounting Option-1: LOCKING;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$4.000
100+ parts
1k+ parts
$3.560
10k+ parts
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Telecom & Datacom Connectors RJE58-188-5261 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJE58-188-5261 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Vishay Sprague
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gulf Semiconductor
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM358AN
NXP Semiconductors
10226-6212PL
3m Electronic Products Division
10226-6212PL by 3M Electronic Products Division is a Telecom & Datacom Connector with 26 contacts, solder termination, and female contact gender. It is a board-mounted receptacle connector used in telecom and datacom applications for straight mounting style requirements.
MUSB-05-S-B-SM-A-TR
Samtec
Samtec MUSB-05-S-B-SM-A-TR is a USB connector with 5 contacts, matte tin finish, and phosphor bronze material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination.
RJHSE-5384-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
73725-1110BLF
Amphenol's 73725-1110BLF is a telecom/datacom connector with 0.584" body width and 0.776" depth. Featuring polyethylene insulator, TIN over nickel termination finish, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring a reliable female receptacle with right-angle mounting style.
HFJ11-1G01ERL
Halo Electronics
HFJ11-1G01ERL by Halo Electronics is a Telecom & Datacom Connector with gold termination finish. It features a polarized housing, 8 contacts, and right-angle mounting style. Ideal for telecom and datacom applications requiring a compact 0.625" x 0.537" x 0.85" design with filtering capabilities at temperatures ranging from 0 to 70°C.
10118192-0002LF
AMPHENOL ICC
Amphenol Icc's 10118192-0002LF USB connector features a polyethylene insulator, stainless steel shell, and 5 contacts. Ideal for telecom/datacom applications, it is a female receptacle with surface mount termination and right-angle mounting on board.
5173279-3
TE Connectivity 5173279-3 is a Telecom & Datacom Connector with 50 contacts, 1A signal rating, and 0.05" mating contact pitch. Ideal for board mounting applications in telecom and datacom systems due to its high insulation resistance of 500MOhm and operating temperature range from -55°C to 105°C.
JXD1-0025NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
43202-8104
Molex
Molex 43202-8104 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its female contact gender, right-angle mounting style, and commercial reliability.
629105150921
Wuerth Elektronik & Kg
629105150921 by Wurth Elektronik is a USB connector with dimensions of 0.329" x 0.118" x 0.197". It has an insulation resistance of 1 Gohm, dielectric voltage of 100VAC, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications, it features a female contact gender, surface mount termination type, and matte tin shell finish.
46765-1001
Molex 46765-1001 is a Telecom & Datacom Connector with 0.256" body length, 200VAC dielectric voltage, and GOLD termination. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it operates b/w -30 to 85°C. This male connector offers 19 contacts in a right-angle receptacle design for commercial applications.
MTCC2R-020-020-01
TE Connectivity's MTCC2R-020-020-01 is a 3" telecom connector with 5000000000 ohm insulation resistance and 2121VAC dielectric voltage. It operates b/w -65 to 125 °C, UL-rated for 5A current, crimp termination, and nickel finish. Ideal for telecom & datacom applications requiring reliable signal connections.
SFPP-3120-L
SFPP-3120-L by Pulse Electronics is a Telecom & Datacom Connector with 8 ports and 160 contacts. It features a right angle mounting style, press fit termination, and board mounting type. Ideal for telecom and datacom applications requiring high-density connectivity in limited space.
54601908WPLF
Amphenol's 54601908WPLF is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a matte tin over nickel finish, UL-rated durability of 250 cycles, and a right-angle mounting style.
RJE73-188-00410
Amphenol
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD (50); JESD-609 Code: e3;
TM11R-5M2-88-LP(70)
Hirose Electric
TM11R-5M2-88-LP(70) by Hirose Electric is a Telecom & Datacom Connector with 8 contacts, rated at 1A signal current. It features POLYBUTYLENE TEREPHTHALATE insulator material, Tin (Sn) finish, and operates b/w -55 to 85°C. Ideal for telecom applications requiring durable right-angle mounting with solder termination.
2173157-3
TE Connectivity 2173157-3 is a POLYETHYLENE telecom/datacom connector with SOLDER HOLD DOWN. Operating temp: -30 to 85°C, UL94V-0 rated, and 5 contacts. Ideal for board mounting in applications requiring a durable, right-angle receptacle with surface mount termination.
1888250-4
TE Connectivity 1888250-4 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 500M ohm insulation resistance. It features a 0.641" body length, 0.456" width, and 0.165" depth. Ideal for telecom applications requiring durable connectors with high insulation resistance.
HDRA-E68LFDT-SL
Honda Tsushin Kogyo
HDRA-E68LFDT-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with a nickel shell finish and polyphenylene sulfide insulator. It features female contacts, solder termination, and right-angle mounting suitable for board and panel applications. The UL 94V-0 flammability code ensures high safety standards.
43223-6101
Molex 43223-6101 is a telecom & datacom connector with 0.985" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in applications requiring 12 contacts, female gender, and solder termination. Operating temp range -40 to 80°C with durability of 500 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved