Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$21.090
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Amphenol Cables on Demand
1+ parts
$10.330
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$15.240
$13.610
DigiKey
$21.100
$15.245
PEI Genesis
Verical
Chip1Stop
Nova Conductors
$14.070
Electro Sonic
$17.050
$13.760
$13.210
Vyrian
Rapid Electronics
IBS Electronics
TME
AZTECH Wire
$5.424
Advanced Electronics
$7.884
$7.174
$6.465
Ampacity Inc.
$8.780
Netroflash
Gateway Technologies
$12.522
Singapore Electronics
$15.476
$14.392
$13.773
$13.154
Authorized Procurement Solutions
Assy Fe
Electrical Wires & Cables MP-54RJ45DNNE-001 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
P502-050
Tripp Lite
44A0111-22-911
TE Connectivity's 44A0111-22-911 wire is MIL-W-81044 approved with a 600V rating. Featuring stranded construction, radiation-crosslinked PVF jacket, and tin finish copper alloy conductor, it operates b/w -65 to 135 °C. Ideal for applications requiring flexible cord and fixture wire up to 0 AWG size.
55A0111-22-93
TE Connectivity 55A0111-22-93 is a stranded electrical wire with 600V rating, TIN finish, and 22 AWG gauge. Ideal for general purpose and lightweight applications, it has a temperature range of -65 to 150°C. Suitable for flexible cord and fixture wiring needs.
P006-010
Tripp Lite P006-010 is an 18 AWG power cable with NEMA5-15P and IEC-320-C13 connectors. It has a rated voltage of 125V and can handle a max current of 10A. This cable is suitable for use with PCs, monitors, and servers in temperatures ranging from -20°C to 60°C.
LMR-240-UF
L-com
WIRE AND CABLE;
44A0111-28-921
TE Connectivity's 44A0111-28-921 is a flexible cord with 600V rated voltage, TIN finish copper alloy conductor, and PVDF insulator. It operates b/w -65°C to 135°C, suitable for various electrical applications.
M22759/11-20-9
Harbour Industries
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.47 mm; Resistance: .03 ohm; Conductor Material: COPPER;
55A0111-22-91
TE Connectivity's 55A0111-22-91 is a STRANDED wire with TIN finish, rated at 600V. With a conductor made of COPPER ALLOY, it has a diameter of 1.09mm and operates b/w -65 to 150°C. Ideal for GENERAL PURPOSE applications, this FLEXIBLE CORD is lightweight and features a cross section area of 0.38 mm2.
52003
Helukabel
Helukabel 52003 is a stranded power/control cable with CE & DIN VDE 0250 approvals. Featuring polyethylene polymer insulation, it has a rated voltage of 300V and operates up to 70°C. Ideal for electrical equipment in dry, damp, and wet conditions, this cable has a cross-section area of 4mm2 and consists of four bare copper conductors.
55A0111-24-90
TE Connectivity's 55A0111-24-90 wire is a stranded copper alloy cable with tin finish, rated for 600V. With a diameter of 0.94mm and 19X36 stranding, it operates b/w -65 to 150°C. Ideal for general purpose applications, this flexible cord and fixture wire is lightweight and has a cross-sectional area of 0.24 mm2.
F9TSPXNXNSNF040
Panduit
9509060500
Belden
1750410B1
Volex Plc
Volex Plc's 1750410B1 is a PVC power cable with CSA and UL approvals, rated for 125V/15A. Featuring NEMA5-15P to C-13 connectors, it has 3 conductors at 0.38mm diameter. Ideal for electrical applications requiring reliable power transmission.
35669
Cables To Go
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: USB 2.0 B MALE; Shielding: YES; MIL Conformity: NO; Conductor Material: COPPER ALLOY;
12345
Helukabel 12345 is a CONTROL CABLE with STRANDED construction, PVC jacket, and shielding. It has CE, CSA, DIN, EN, UL, VDE approvals for use in tool machinery for MEASURING & MONITORING at -40 to 80°C. With 600V rating and 0.5mm2 cross section area made of BARE COPPER conductors.
7000-40581-6310100
Murrelektronik
830030101000
Belden 830030101000 is a UL-approved flexible cord and fixture wire with stranded silver-coated copper conductor (24 AWG, 1.1176 mm diameter, 19X36 stranding) insulated with TFE material. Ideal for electrical wiring applications requiring flexibility and durability.
TC2050-IDC-NL
Tag-connect
CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO; Additional Features: PLUG-OF-NAILS;
2903
Quabbin Wire & Cable
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Resistance: .14 ohm; Construction: STRANDED; Wire Gauge (AWG): 26;
M22759/16-22-9
Carlisle Interconnect Technologies
M22759/16-22-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, featuring tin finish and ETFE insulation. Ideal for aerospace applications, it operates b/w -55°C to 150°C, with 22 AWG copper conductor and resistance of 0.053 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP-54RJ45DNNE-002
Amphenol
CABLE ASSEMBLY; Connector Side-1: RJ45 PLUG; Connector Side-2: RJ45 PLUG; Shielding: YES; MIL Conformity: NO; Diameter: 5.791 mm;
MP-54RJ45SNNE-010
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Shielding: YES; DIN Conformity: NO; Construction: STRANDED;
MP-54RJ45SNNE-002
MP-54RJ45SNNE-100
MP-54RJ45DNNE-003
MP-54RJ45DNNE-025
MP-54RJ45DNNE-005
MP-54RJ45SNNE-050
MP-54RJ45SNNE-007
MP-54RJ45SNNE-003
MP-54RJ45DNNE-007
MP-54RJ45DNNE-010
MP-54RJ45DNNE-015
MP-54RJ45DNNE-050
MP-54RJ45DNNE-075
MP-54RJ45DNNE-100
MP-54RJ45DNNE-150
MP-54RJ45DNNE-200
MP-54RJ45DNNE-250
MP-54RJ45DNNE-300
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved