Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$50.270
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$12.700
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$29.283
$27.819
Arrow
$36.160
Element14
$48.461
Mouser Electronics
$40.700
Master Electronics
$52.400
$38.060
DigiKey
$52.530
$37.961
$35.612
Newark
$55.080
$51.400
$51.010
Verical
$61.035
$51.377
Farnell
$85.500
$47.880
Powell Electronics
$31.990
Electro Sonic
$43.600
$31.180
$29.990
IBS Electronics
$71.710
$54.094
VNN
Nova Conductors
Vyrian
Aztec Data Supply Inc.
$6.408
Gateway Technologies
$8.446
$7.516
Singapore Electronics
$9.290
$8.639
$8.268
$7.896
Ampacity Inc.
$10.790
Semicontronic
$10.520
$10.466
Corohmni
$28.430
Advanced Electronics
Continental Prestige Electronics
$41.770
$23.390
Argo Parts USA
Bastille Electronics
Electrical Wires & Cables 115101-20-M10.0 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Grande Electronics
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U3A00057-3M
Infinite Electronics International
245106-02-06.00
Amphenol
3021001-03
Qualtek Electronics
3021001-03 by Qualtek Electronics is a UL approved shielded cable assembly with 28 AWG wire gauge, 4mm diameter, and USB-A MALE to USB-B MALE connectors. It has 3 ohm resistance and 4 conductors. Ideal for electrical connections requiring reliable data transfer in various applications.
3051/1OR001
Alpha Wire
Wires and Cables;
55A0111-14-0
TE Connectivity
TE Connectivity 55A0111-14-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 14 AWG size and SPEC 55 cable type.
35110/15BK199
The Alpha Wire 35110/15BK199 is a stranded electrical wire with a polyethylene jacket and shielding. It has a rated voltage of 300V, tin conductor finish, and can operate in temperatures ranging from -30 to 80 °C. This flexible cord and fixture wire is commonly used in applications requiring a durable and reliable wiring solution.
PMHDMF-3
L-com
22759/32-22-0
TE Connectivity's 22759/32-22-0 wire is a flexible cord with 22 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is suitable for various electrical applications requiring reliable performance in extreme conditions. Compliant with MIL-DTL-22759 standards, it offers high-quality connectivity solutions.
2205305-1
TE Connectivity's 2205305-1 wire is designed for power and signal applications, with a rated voltage of 300V and insulator material made of PTFE. It can operate in temperatures ranging from -40°C to 150°C, suitable for various electrical wiring needs with its 24 AWG wire gauge and 31 conductors.
282720-000
TE Connectivity's 282720-000 is a flexible cord and fixture wire with a max voltage of 600V. Featuring a tin conductor finish, it has an operating temperature range from -65°C to 150°C. This copper alloy wire in 20 AWG gauge is ideal for electrical applications requiring SPEC 44 cable types.
MXT10050CMBK
Startech.com
MXT10050CMBK by Startech.com is a 0.5mm PVC jacketed communication cable with shielding. Featuring 28 AWG wire gauge, it has DB9 FEMALE and DB9 MALE connectors for data transmission. Ideal for connecting devices in electrical and communication applications.
923345-01-C
3m Electronic Products Division
3m Electronic Products Division's 923345-01-C is a SOLID wire with AWG 22 gauge, 0.326 mm2 cross section area, and tinned copper conductor. Ideal for flexible cord and fixture wire applications due to its 1X22 stranding and 0.003 mm length.
M27500-22ML1T08
TE Connectivity's M27500-22ML1T08 is a MIL-DTL-27500 cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, suitable for flexible cord and fixture wire applications.
22221
Helukabel
Helukabel 22221 is a robust control cable with CE, DIN, EAC, VDE approvals. Stranded bare copper conductors with polyvinyl chloride insulation and polyurethane jacket. Suitable for reconnection applications, DIN conformity, rated at 300V, -40 to 80°C operating temperature range.
PXP6040/A/2M00
Bulgin
The Bulgin PXP6040/A/2M00 is a UL-approved communication cable with PVC jacket, 28 AWG wire gauge, and rated voltage of 30V. It features USB A male to USB B male connectors, suitable for applications requiring a max operating temperature of 70°C. Perfect for data transfer in various electronic devices.
49950
Helukabel 49950 is a stranded PVC cable with CE, CSA, UL approvals. It has 18 bare copper conductors, shielded with PVC jacket for use in robot systems and moving machines. With a rated voltage of 300V, it operates b/w -40 to 80°C conforming to DIN and IEC standards.
44A0111-22-9-L038
WIRE AND CABLE;
M17/113-RG316
Defense Logistics Agency
M17/113-RG316 by Defense Logistics Agency is a MIL-approved communication cable with stranded construction, FEP jacket, and shielding. It has a rated voltage of 900V, silver conductor finish, and PTFE insulator for high temp applications. With copper-covered steel conductor material, it operates b/w -55 to 200 °C.
M22759/16-22-5
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Resistance: .053 ohm; Stranding: 19X34; Diameter: 1.32 mm;
44058
44058 by Helukabel is a CE approved solid cable with 500V rating, PVC insulation, and tin finish. It has 11 copper alloy conductors, 0.5mm2 cross-section area, and used for control applications due to its 20 AWG gauge and 1X20 stranding design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
115101-19-M3.00
115101-19-M30.0
115101-01-M0.75
115101-01-M0.25
115101-35-180
115101-20-72.00
115101-22-24.00
115101-20-120
115101-19-M5.00
115101-35-120
115101-30-18.00
115101-19-600
115101-35-M3.00
115101-22-36.00
115101-20-M1.00
115101-19-M0.25
115101-20-M5.00
115101-30-06.00
115101-19-M1.00
CABLE ASSEMBLY; Connector Side-1: BNC PLUG; Connector Side-2: BNC PLUG; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE; DIN Conformity: NO;
115101-20-M1.25
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved