Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$23.750
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Amphenol Cables on Demand
1+ parts
$12.710
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$20.990
$17.460
$16.760
Mouser Electronics
$26.510
$19.520
$18.660
DigiKey
$27.560
$19.914
$17.779
Verical
Nova Conductors
$17.480
Electro Sonic
$21.420
$17.150
$16.460
IBS Electronics
$30.837
$25.309
$24.210
Vyrian
Advanced Electronics
$4.635
$4.218
$3.801
AZTECH Wire
$8.210
$7.880
$7.730
$7.570
Ampacity Inc.
$10.800
Continental Prestige Electronics
$17.130
Gateway Technologies
$15.557
Singapore Electronics
$19.227
$17.881
$17.112
$16.342
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$16.606
$16.256
Electrical Wires & Cables MP-54RJ45DNNE-005 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Zowie Technology
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
DS18B20U+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
DS18B20+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
10008
Helukabel
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Maximum Operating Temperature: 80 Cel; Application: MEASURING AND CONTROL CABLES IN TOOL MACHINES; Approvals (V): CE; EAC; IPA; VDE;
5010/25CBK199
Alpha Wire
Alpha Wire 5010/25CBK199 is a flexible cord with 25 conductors, rated at 300V. Constructed with PVC jacket and tin finish copper alloy conductor, it operates b/w -35 to 105°C. Ideal for applications requiring UL, CSA, CE approvals in electrical wiring setups.
282783-006
TE Connectivity's 282783-006 wire is a flexible cord with copper alloy conductor, rated at 600V. With a temperature range of -65 to 150°C, it features 24 AWG gauge, TIN finish, and is suitable for electrical applications requiring durable and reliable wiring solutions.
U.FL-2LP-088K1T-A-(150)
Hirose Electric
Hirose Electric U.FL-2LP-088K1T-A-(150) is a stranded FEP cable with silver finish, shielding, and 30 AWG. Ideal for communication applications, it has a diameter of 1.37mm, operates b/w -40 to 90°C, and features U.FL connectors on both ends.
41801
Lindy International
CABLE ASSEMBLY; Connector Side-1: USB A 2.0 MALE; Connector Side-2: MICRO USB B MALE; Shielding: YES; DIN Conformity: NO; IEC Conformity: NO;
2213CSL001
Alpha Wire 2213CSL001 is a stranded PVC jacketed cable with shielding, rated for 150V. Featuring tin finish copper alloy conductors, it operates b/w -20 to 80°C. Ideal for communication and control applications requiring a durable cable with 6 conductors and 0.326mm2 cross-sectional area.
1555RD005
Alpha Wire's 1555RD005 is a stranded electrical wire with TIN finish, rated for 1000V. Featuring PVC insulation, it operates b/w -40 to 80°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, AWG 18 gauge, and 0.823mm² cross-sectional area.
M22759/11-22-0
Standard Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.3 mm; Conductor Finish: SILVER; Stranding: 19X34;
T4161110005-005
TE Connectivity T4161110005-005 is a shielded communication cable with 22 AWG copper alloy conductor, rated for 60V and 4A. It features PVC insulation, suitable for straight mounting with M12 screw option. Ideal for applications requiring reliable signal transmission in industrial settings.
PXP6040/B/2M00
Bulgin
The Bulgin PXP6040/B/2M00 is a UL-approved communication cable with PVC jacket, 28 AWG wire gauge, and 1A rated current. It features USB B male to USB A male connectors, suitable for applications requiring a max operating temperature of 70°C and rated voltage of 30V. Ideal for data transfer in various electronic devices.
T4161110008-005
TE Connectivity's T4161110008-005 is a shielded communication cable with 30V rated voltage and copper alloy conductor. It has a length of 5mm, supports up to 0 AWG wire size, and features straight mounting style with screw or M12 options. Ideal for electrical applications requiring reliable signal transmission.
U.FL-2LP-088K1T-A-(200)
Hirose Electric's U.FL-2LP-088K1T-A-(200) is a UL-approved communication cable with PFA jacket, silver conductor finish, and copper conductor material. Operating from -40°C to 90°C, it has a 36 AWG wire gauge and 0.81mm diameter. Ideal for applications requiring shielding such as data transmission in electronics.
M22759/32-20-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL; No. of Conductors: 1;
M22759/16-10-9
Carlisle Interconnect Technologies
M22759/16-10-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, ETFE insulation, and copper conductor. Ideal for aerospace applications, it operates b/w -55°C to 150°C. Features include 10 AWG size, 3.61mm diameter, and resistance of 0.004 ohm.
M22759/11-26-9
Defense Logistics Agency
M22759/11-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with silver finish, rated for 600V. Constructed with copper conductor, extruded PTFE insulator, and operating temperature up to 200°C. Ideal for flexible cord and fixture wire applications.
WIRE AND CABLE; Shielding: NO; Stranding: 19X34; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL; SAE; Additional Features: STANDARD: MIL-W-22759/11;
M22759/34-22-9
TE Connectivity's M22759/34-22-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a temperature range of -65 to 150°C, this copper alloy conductor wire in 22 AWG size is suitable for MIL-DTL-22759 cables and fixtures.
115101-01-M0.25
Amphenol
U3A00057-3M
Infinite Electronics International
PMHDMF-5
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP-54RJ45SNNE-100
MP-54RJ45DNNE-003
MP-54RJ45DNNE-025
MP-54RJ45DNNE-002
CABLE ASSEMBLY; Connector Side-1: RJ45 PLUG; Connector Side-2: RJ45 PLUG; Shielding: YES; MIL Conformity: NO; Diameter: 5.791 mm;
MP-54RJ45SNNE-002
MP-54RJ45SNNE-050
MP-54RJ45SNNE-007
MP-54RJ45SNNE-010
CABLE ASSEMBLY; Connector Side-1: RJ45; Connector Side-2: RJ45; Shielding: YES; DIN Conformity: NO; Construction: STRANDED;
MP-54RJ45SNNE-003
MP-54RJ45DNNE-007
MP-54RJ45DNNE-010
MP-54RJ45DNNE-015
MP-54RJ45DNNE-050
MP-54RJ45DNNE-075
MP-54RJ45DNNE-100
MP-54RJ45DNNE-150
MP-54RJ45DNNE-200
MP-54RJ45DNNE-250
MP-54RJ45DNNE-300
MP-54RJ45DNNE-001
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved