Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RELAY SOCKET; Housing Material: POLYETHERIMIDE; Additional Features: LOW PROFILE; JESD-609 Code: e4; Contact Finish (Mating): GOLD; No. of Contacts: 11;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Flame Enterprises (Authorized)
1+ parts
100+ parts
1k+ parts
10k+ parts
Singapore Electronics
Gateway Technologies
Perfect Parts
Chip Carrier IC & Component Sockets M12883/52-003 attributes and parameters. Explore more Chip Carrier IC & Component Sockets devices from Amphenol
Number of Positions or Pins:
Contact Finish - Mating:
Contact Finish - Termination:
IC Socket Type:
Housing Material:
JESD-609 Code:
Special Features:
M12883/52-003 Chip Carrier IC & Component Sockets trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
XR2A-2402
Omron
IC SOCKET; Contact Finish (Termination): GOLD; Contact Material: BERYLLIUM COPPER; Contact Finish (Mating): GOLD (30); Manufacturer Series: XR2A; JESD-609 Code: e4;
XR2A-0821-N
Omron's XR2A-0821-N is a DIP8 IC socket with 8 contacts, rated for 1A current. It features gold flash contact finish, Beryllium Copper material, and polybutylene terephthalate housing. With a PCB contact row spacing of 7.62mm and rectangular pattern, it is ideal for applications requiring a dielectric voltage withstand of 1000VAC.
HLT-1015-G-H
Samtec
Samtec's HLT-1015-G-H is a plastic IC socket with 150 brass contacts, gold finish over nickel for mating, and gold with nickel termination. It is designed for use on PGA150 devices, offering reliable connectivity in chip carrier applications.
MPAS-069-ZHGT-11
Samtec's MPAS-069-ZHGT-11 is a PGA69 IC socket with 69 contacts, 2.54mm terminal pitch, and rectangular PCB contact pattern. It features polyester housing material, solder termination type, and operates b/w -65°C to 125°C. Ideal for chip carrier applications requiring a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm.
110-87-632-41-001101
Preci-dip Sa
110-87-632-41-001101 by Preci-dip Sa is a DIP32 IC socket with 32 contacts, rated for 1A current. It features Beryllium Copper contact material with Gold Flash finish and Polycyclohexydimethylene Terephthalate-Polyester housing. With a PCB contact row spacing of 15.24mm, it operates b/w -55°C to 125°C, making it ideal for various electronic applications requiring reliable connections.
XR2A-1811-N
IC SOCKET; JESD-609 Code: e4; Contact Finish (Mating): NOT SPECIFIED; Contact Finish (Termination): GOLD; Contact Material: NOT SPECIFIED;
390261-4
Tyco Electronics Amp
IC SOCKET; Device Type Used On: DIP16; Mounting Style: STRAIGHT; Contact Style: LEAF; Dielectric Withstanding Voltage (V): 1000VAC; Housing Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
110-83-314-41-001101
110-83-314-41-001101 by Preci-dip Sa is a DIP14 IC socket with 14 contacts, rated for 1A current. It features Beryllium Copper contact material, Gold mating finish, and Tin termination finish. With a PCB contact row spacing of 7.62mm, it has a dielectric voltage of 1400VAC and operates b/w -55°C to 125°C. Ideal for chip carrier IC applications due to its high insulation resistance and durable housing material.
PGA-280
Robinson Nugent
IC SOCKET; Device Type Used On: PGA280; Housing Material: POLYESTER; Additional Features: STANDARD: UL 94V-0; No. of Contacts: 280; Manufacturer Series: PGA;
XR2A-5001-N
IC SOCKET; Contact Finish (Mating): GOLD (30); Manufacturer Series: XR2A; JESD-609 Code: e4; Contact Material: BERYLLIUM COPPER; Contact Finish (Termination): GOLD;
551-10-081-09-000004
Mill-max Mfg
Mill-max Mfg's 551-10-081-09-000004 is a chip carrier IC & component socket made of POLYCYCLOHEXYDIMETHYLENE TEREPHTHALATE-POLYESTER. It has 81 contacts with GOLD (10) over NICKEL (150) mating finish and Gold (Au) termination finish. This IC socket is used on PGA81 devices.
27E128
TE Connectivity
IC SOCKET; Device Type Used On: RELAY; Housing Material: POLYESTER; No. of Contacts: 10; Contact Material: NOT APPLICABLE; Termination Type: SOLDER LUG;
CQF100-138A
Texas Instruments
IC SOCKET; Device Type Used On: QFP100; Housing Material: GLASS FILLED POLYETHERIMIDE; Manufacturer Series: CQF; No. of Contacts: 100;
828-AG11D-ESL
Abb Installation Products
IC SOCKET; Device Type Used On: DIP28; Mounting Style: STRAIGHT; Contact Style: RND PIN-SKT; Housing Material: POLYESTER; Body Depth: .105 inch;
XR2A-1621-N
IC SOCKET; Contact Finish (Mating): GOLD FLASH; Manufacturer Series: XR2A; Contact Material: BERYLLIUM COPPER; JESD-609 Code: e4; Contact Finish (Termination): GOLD FLASH;
HLT-0919-G-R
Samtec's HLT-0919-G-R is a plastic chip carrier socket with 171 brass contacts. It features gold over nickel contact finish for mating and termination, suitable for PGA171 devices. This IC socket type is ideal for high-performance applications requiring reliable connections.
XR2A-2805
IC SOCKET; Manufacturer Series: XR2;
8134-HC-8P2
Augat
IC SOCKET; Manufacturer Series: 8134-HC;
150-10-324-00-018101
150-10-324-00-018101 by Preci-dip Sa is a DIP24 IC socket with 24 brass contacts and gold finish. Its housing material is POLYCYCLOHEXYDIMETHYLENE TEREPHTHALATE-POLYESTER. Ideal for chip carrier applications, this socket offers reliable connectivity and durability in electronic devices.
MT78740-
IC SOCKET; Housing Material: POLYAMIDE; No. of Contacts: 3; Contact Finish (Mating): NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Type: SOLDER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved