Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's HVSL800082A135 is a 3.185" x 3.724" x 2.35" combination line connector with polyethylene insulator, UL94V-0 rated, operating from -40°C to 125°C. It has 2 contacts for signal current up to 180A, male gender, crimp termination, and plug body style suitable for cable mounting applications per UL standards.
Median Price
$86.638
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$51.770
100+ parts
$41.250
1k+ parts
-
10k+ parts
Verical
$71.120
TTI Europe
$105.483
$78.814
Element14
$133.120
Distrelec
RS (Exports)
$81.493
Nova Conductors
$73.575
Vyrian
IBS Electronics
$55.183
$52.958
NAC Semi
$68.120
Corohmni
$5.647
AZTECH Wire
$13.912
Gateway Technologies
$66.949
$59.584
Ampacity Inc.
$69.270
Semicontronic
$67.538
$67.192
Singapore Electronics
$73.643
$68.487
$65.542
$62.596
Continental Prestige Electronics
$92.870
$61.000
Argo Parts USA
Netroflash
$72.103
$69.896
$68.425
Authorized Procurement Solutions
Eastek
EMSNET (Excess)
The compact body length allows for easy installation in tight spaces, making this connector versatile for various applications.
The wide body width provides stability and durability to the connector, ensuring a secure connection between components.
The optimal body depth accommodates the necessary components inside the connector, allowing for efficient signal transmission.
Polyethylene is known for its excellent electrical insulation properties, providing reliable and safe operation of the connector.
With a high maximum operating temperature, this connector can withstand heat and perform reliably in various environments.
The low minimum operating temperature makes this connector suitable for use in cold environments without compromising performance.
The combination line connector offers versatility by allowing different types of connections to be made with just one connector, saving space and cost.
Having a high UL flammability rating of 94V-0 ensures that this connector meets safety standards and reduces the risk of fire hazards.
The high rated current capacity of 180A ensures that this connector can handle heavy electrical loads without overheating or failing.
Being UL certified guarantees that this connector meets industry standards for safety, quality, and performance.
Having 2 contacts allows for a simple and straightforward connection setup, making it easy to install and use.
The cable mounting type provides flexibility in installation, allowing the connector to be easily attached to cables for convenient use.
The crimp termination type offers a secure and reliable connection method, ensuring that the contacts are properly attached and maintained.
The male contact gender is compatible with various female connectors, making this connector versatile and widely compatible.
The plug body style is common and easy to use, allowing for quick and simple connections to be made without any specialized tools.
The round pin socket contact style provides a reliable and stable connection, ensuring that signals are transmitted accurately and efficiently.
Combination Line Connectors HVSL800082A135 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
HVSL800082A135 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3203C
Idec
ROTARY SWITCH;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Electronic Devices
Zetex Plc
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
929505-2
TE Connectivity
TE Connectivity's 929505-2 is a Combination Line Connector with dimensions of 0.937" x 0.881" x 1.02". It has 6 contacts, rated at 29A for signal current, and operates b/w -40°C to 130°C. Ideal for applications requiring a polarized male connector with panel mounting and POLYBUTYLENE TEREPHTHALATE insulator material.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
AT4PS-CKIT
Amphenol
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
827551-3
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Type: CABLE; Manufacturer Series: 827551;
DTM06-4S-E004
TE Connectivity's DTM06-4S-E004 is a 2-row, 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with crimp termination.
DTP04-2P-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: RECEPTACLE; Empty Shell: NO; Contact Style: RND PIN-SKT;
1-1418883-1
TE Connectivity 1-1418883-1 is a Combination Line Connector with dimensions 4.744"x1.811"x1.732". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and UL Flammability Code 94-HB. With 62 contacts, it's ideal for applications requiring a polarized, female connector with hybrid contact style and strain relief mounting option.
DTM04-4P-E003
TE Connectivity's DTM04-4P-E003, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 4 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with male contact gender and receptacle body style.
1718488-1
TE Connectivity's 1718488-1 is a Combination Line Connector with dimensions of 1.512"x.925"x.435". Rated for 36V, it operates b/w -40 to 120°C and has UL Flammability Code 94-HB. With 7 contacts, it is used in cable mounting applications as a polarized receptacle connector with SQ PIN-SKT contact style.
12015782
Aptiv
COMBINATION LINE CONNECTOR;
2-180916-0
TE Connectivity's 2-180916-0 is a Combination Line Connector with dimensions of 1.22" x 0.37" x 1.22". Made of POLYAMIDE, it operates b/w -40 to 105°C and has UL Flammability Code 94V-2. Ideal for applications requiring male crimp termination at 115/230VAC mains connector rating.
DTM06-12SB-E007
TE Connectivity's DTM06-12SB-E007 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DRC13-40PA-CG01
TE Connectivity's DRC13-40PA-CG01 is a 4-row combination line connector with dimensions of 1.39" x 3.742". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, this male connector has a solder termination type and UL flammability rating of 94V-0.
DT06-12SC
TE Connectivity's DT06-12SC is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-12PC-BE02
TE Connectivity's DT04-12PC-BE02 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
1-1563759-1
TE Connectivity 1-1563759-1, a Combination Line Connector with 18 contacts, rated voltage of 60V and current of 20A. Ideal for cable mounting applications, featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operating temperatures from -40 to 140°C.
AT06-2S-RED
The Amphenol AT06-2S-RED is a combination line connector with 2 contacts, rated for 13A signal current. It has a compact body size of 0.713" x 0.591" x 1.126", made of polyethylene for durability. Ideal for cable mounting applications, it features female contact gender and crimp termination, suitable for temperatures ranging from -55°C to 125°C.
AT06-12SC-SRGN
The Amphenol AT06-12SC-SRGN is a Combination Line Connector with 12 contacts, rated at 13A signal current. Its compact body measures 1.772" x 0.827" x 1.713", made of POLYETHYLENE for durability. Ideal for applications requiring reliable cable mounting in temperatures ranging from -55°C to 125°C.
8-968974-1
TE Connectivity's 8-968974-1 is a Combination Line Connector with dimensions of 1.417" x 1.417" x 0.945". Rated for 28V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 120 °C. Ideal for cable mounting applications with 18 contacts, this connector is polarized and features a shell made of GLASS FILLED POLYAMIDE66.
DT04-4P-CE03
TE Connectivity's DT04-4P-CE03 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and min of -55°C. Ideal for applications requiring a polarized, crimped male connector with strain relief mounting on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HVSL800022A1H6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 200 A; No. of Rows Loaded: 1; Body Depth: 1.949 inch;
HVSL800082A150
Amphenol's HVSL800082A150 is a 3.185" x 3.724" x 2.35" Combination Line Connector with POLYETHYLENE insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features a male RND PIN-SKT contact style. Ideal for cable mounting applications requiring reliable crimp termination.
HVSL633063A106I
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Minimum Operating Temperature: -40 Cel; Body Width: 1.299 inch;
HVSL800062A135
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: EN; UL; Mixed Contacts: NO; Body or Shell Style: PLUG;
HVSL800022A1D6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Rated Current - Signal: 200 A; Body Width: 2.598 inch;
HVSLS600062A116
The Amphenol HVSLS600062A116 is a Combination Line Connector with dimensions 2.559" x 1.35" x 3.032". It has a max operating temp of 125°C and min of -40°C, rated for 120A signal current. Ideal for applications requiring a male plug connector with round pin/socket contact style, suitable for cable mounting via crimp termination.
HVSLS600082A125
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: METAL; Minimum Operating Temperature: -40 Cel; Filter Feature: NO;
HVSLS600062A125
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Additional Features: POALRIZED; Filter Feature: NO;
HVSLS600082A116
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: 3.146 inch; Mixed Contacts: NO; Maximum Operating Temperature (Cel): 125;
HVSL633063A104I
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Rated Current - Signal: 32 A; Shell Material: COPPER ALLOY;
HVSL800062A150
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; No. of Rows Loaded: 1; Mounting Type: CABLE;
HVSL800062C150
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Mixed Contacts: NO; Total No. of Contacts: 2;
HVSLS600062B016
The Amphenol HVSLS600062B016 is a male plug combination line connector with 2 contacts, rated for 120A signal current. It has dimensions of 2.559" x 1.35" x 3.032" and operates b/w -40°C to 125°C. Ideal for cable mounting applications requiring crimp termination with round pin/socket contact style.
HVSLS600062B025
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: 1.35 inch; Mixed Contacts: NO; Mounting Type: CABLE;
HVSLS600062B116
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Body Depth: 3.032 inch; Termination Type: CRIMP;
HVSLS600062B125
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Termination Type: CRIMP; Body Depth: 3.032 inch;
HVSL800022B1H6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Additional Features: POALRIZED; Filter Feature: NO;
HVSLS800022A1H6
COMBINATION LINE CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Total No. of Contacts: 2; Body or Shell Style: RECEPTACLE;
HVSL1400022A1D8S6
HVSL800082A035
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; UL Flammability Code: 94V-0; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved