Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol AT04-6P-PM05 is a 2-row combination line connector with 6 contacts, rated for 13A signal current. With dimensions of 1.969" x 1.22" x 0.787", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications, mating with AT04-6S-PM05 receptacle connectors.
Median Price
$6.755
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$4.366
100+ parts
$4.078
1k+ parts
$4.026
10k+ parts
-
Farnell
$6.110
$4.640
$4.260
Element14
$6.428
$5.015
$4.330
Waytek Inc.
$6.460
$5.900
$5.620
DigiKey
$7.050
$5.346
$4.328
Mouser Electronics
$7.070
$4.870
Powell Electronics
$7.650
$6.240
Verical
$7.413
$6.339
Nova Conductors
$4.345
Maritex
$5.106
$2.427
Chief Enterprises
$13.730
$4.230
$10.990
VNN
Electro Sonic
$4.850
$3.900
$3.860
IBS Electronics
$5.568
$5.344
NAC Semi
$6.250
Vyrian
Aztec Data Supply Inc.
$3.440
Ampacity Inc.
$3.490
Semicontronic
$3.600
$3.510
$3.492
Gateway Technologies
$4.240
$3.773
Argo Parts USA
$4.320
Singapore Electronics
$4.663
$4.336
$4.150
$3.963
Corohmni
$5.584
Continental Prestige Electronics
$6.200
$4.900
Perfect Parts
Eastek
$4.860
EMSNET (Excess)
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$6.320
Netroflash
$4.258
$4.127
$4.041
The compact size of this product makes it suitable for installations where space is limited.
The narrow width of this connector allows for efficient use of space on panels or in tight locations.
The slim depth of this connector helps in installations where depth is a constraint.
Polyethylene is a durable and reliable insulator material that provides good electrical insulation properties.
The high maximum operating temperature ensures reliable performance in various temperature conditions.
The low minimum operating temperature allows this connector to function in extremely cold environments.
Having 2 rows loaded provides flexibility in connecting multiple circuits or signals.
The high rated current allows for efficient transmission of signals without risk of overheating.
With 6 contacts, this connector can handle multiple signal connections.
The versatile mounting type allows for easy installation on both cables and panels.
Compatibility information ensures proper mating and connectivity with corresponding connectors.
The male contact gender is commonly used for providing connections in electronic devices.
The receptacle style allows for easy insertion and removal of the connector.
The round pin socket contact style offers reliable and secure connections between components.
Combination Line Connectors AT04-6P-PM05 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Total No. of Contacts:
AT04-6P-PM05 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Onsemi
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Digitron Semiconductors
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Daco Semiconductor
Eic Semiconductor
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
DT04-2P-E005
TE Connectivity
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DTM13-12PA-R008
TE Connectivity's DTM13-12PA-R008 is a 2-row combination line connector with 12 contacts, rated at 7.5A signal current and 250V voltage. Featuring a polarized design, it uses POLYETHYLENE insulator material and TIN contact finish for reliable performance in temperatures ranging from -55 to 125°C. Ideal for panel mounting applications, this UL-certified connector offers a secure solder termination option.
DTM06-6S-EE03
TE Connectivity's DTM06-6S-EE03 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
1-1564559-1
TE Connectivity 1-1564559-1 is a Combination Line Connector with dimensions of 0.953"x1.732"x.642". Rated for 14V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125°C. With 4 contacts, it's ideal for cable mounting applications requiring a polarized male connector at 25A signal current.
DTP04-2P-C015
TE Connectivity's DTP04-2P-C015 is a combination line connector with dimensions of 1.861" x 0.872" x 0.848". It has a rated voltage of 200V and can operate b/w -55°C to 125°C. With UL certification, it offers 25A signal current capacity and features a male gender contact style for cable mounting applications.
30700-1187
Molex
The Molex 30700-1187 is a Combination Line Connector with dimensions of 1.108" x 0.928" x 1.243". It has 18 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
DT04-12PA
TE Connectivity's DT04-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
DT06-8S
TE Connectivity's DT06-8S is a 8-contact combination line connector with nickel finish. It features polyethylene insulator, crimp termination, and female contact gender. Ideal for cable mounting applications, specifically designed as a plug connector.
1-1418479-1
TE Connectivity 1-1418479-1 is a Combination Line Connector with dimensions 1.732"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With 8 contacts, it's ideal for applications requiring a polarized, female receptacle connector at 20A signal current.
12015798
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Insulator Material: POLYAMIDE6; Total No. of Contacts: 4;
DTM04-4P-E005
TE Connectivity's DTM04-4P-E005 is a 1.77" x 0.756" x 0.772" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. It operates b/w -55°C to 125°C, UL certified with polarized design for one connector application in cable mounting setups.
AT04-2P-RD01
The Amphenol AT04-2P-RD01 is a male receptacle combination line connector with 2 contacts, rated for 13A signal current. It has a compact body size of 0.673" x 0.669" x 1.717" and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications requiring reliable signal transmission.
DT06-3S-CE13
TE Connectivity's DT06-3S-CE13 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. With a rated current of 13A, it is ideal for cable mounting applications requiring crimp termination and polarization key for secure connections.
282762-1
TE Connectivity's 282762-1 is a Combination Line Connector with dimensions of 0.921" x 0.866" x 1.476". Rated for 24V and 20A, it has POLYAMIDE insulator material and operates b/w -30°C to 125°C. Ideal for cable mounting applications, it features a polarized housing and female contact gender.
ATP04-4P-KIT01
The Amphenol ATP04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 25A. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring male contact gender and crimp termination.
DTP04-4P-P052
TE Connectivity's DTP04-4P-P052 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for panel mounting applications requiring a polarized male connector with UL certification.
350777-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Total No. of Contacts: 2; Insulator Material: POLYAMIDE;
1-1318120-3
TE Connectivity 1-1318120-3 is a Combination Line Connector with 0.098" Mating Contact Pitch, 5A Signal Current Rating, and -55 to 105°C Operating Temperature Range. Ideal for commercial applications requiring a polarized housing, crimp termination, and locking mounting on cables.
MX23A34NF1
Japan Aviation Electronics Industry
MX23A34NF1 by Japan Aviation Electronics is a Combination Line Connector with dimensions 2.283" x 0.72" x 1.507". It features 34 contacts made of brass with TIN finish, suitable for board mounting and waterproof applications. The insulator material is glass filled polybutylene terephthalate, making it durable and reliable for various electronic connections.
ATM06-2S-SR01GY
Amphenol's ATM06-2S-SR01GY is a female combination line connector with 2 contacts, rated at 7.5A for signal current. Made of polyethylene, it operates b/w -55 to 125°C and has a compact body size of 0.567" x 0.638" x 1.469". Ideal for cable mounting applications in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT04-4P-KIT01
The Amphenol AT04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 13A signal current. It features a body size of 0.827" x 0.772" x 1.811", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
AT04-3P-RY01
AT04-3P-RY01 by Amphenol is a combination line connector with a body length of 1.933" and depth of 1.91". It has a max operating temperature of 125°C and min operating temperature of -55°C. This male receptacle connector has 9 contacts and can handle a rated current of 13A, making it suitable for various applications requiring reliable signal transmission.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Body Width: .669 inch; No. of Rows Loaded: 1;
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
AT04-2P-SR01BLK
The Amphenol AT04-2P-SR01BLK is a male combination line connector with 2 contacts, rated for 13A signal current. Its polyethylene insulator allows operation b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact dimensions of 0.673" x 0.669" x 2.193".
AT04-2P-SR02BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Body Length: .673 inch; Body Depth: 2.193 inch;
AT04-12PA-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Maximum Operating Temperature (Cel): 125;
AT04-2P-KIT01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 2; Body Length: .673 inch;
AT04-3P-PM12
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Mounting Type: CABLE AND PANEL;
AT04-4P-RD01
Amphenol's AT04-4P-RD01 is a male combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 0.826" x 0.771" x 1.811", it features a polyethylene body and shell, suitable for cable mounting applications in various industries.
AT04-2P-BLK
AT04-2P-BLK by Amphenol is a combination line connector with dimensions of 0.673" x 0.669" x 1.717". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector has 2 contacts, rated for a signal current of 13A, and is designed for cable mounting with crimp termination. Its insulator material is made of polyethylene.
AT04-3P
The Amphenol AT04-3P is a combination line connector with 3 contacts, rated at 13A. It has a body size of 0.961" x 0.827" x 1.7", made of polyethylene for -55 to 125°C applications. This male receptacle connector uses square pin/socket contact style and crimp termination for cable mounting with mating part AT04-3S.
AT04-12PA
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
AT04-3P-L012
The Amphenol AT04-3P-L012 is a male combination line connector with 3 contacts, rated for 13A signal current. Its polyethylene insulator can withstand temperatures from -55°C to 125°C. With a body size of 1.594" x 1.252" x 1.701", it is suitable for cable and panel mounting applications.
AT04-4P-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Body Width: 1.46 inch; Total No. of Contacts: 4;
AT04-4P-MM01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
AT04-12PA-SRGRY
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; No. of Rows Loaded: 2; Insulator Material: POLYETHYLENE;
AT04-3P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .961 inch; Rated Current - Signal: 13 A; Contact Material: NOT SPECIFIED;
AT04-3P-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: WIRE; Insulator Material: POLYETHYLENE; Mounting Type: CABLE;
AT04-4P
The Amphenol AT04-4P is a combination line connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 1.811", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic systems requiring reliable female contact connections.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved