Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol AT06-3S-BLK is a combination line connector with 3 contacts, rated for 13A signal current. It has a compact body size of 0.894" x 0.724" x 1.138", suitable for cable mounting with crimp termination. Ideal for applications requiring a female contact gender and operating temperatures from -55°C to 125°C.
Median Price
$0.838
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Avnet
1+ parts
$0.356
100+ parts
-
1k+ parts
10k+ parts
TLC Electronics
$0.550
$0.510
$0.484
$0.451
PEI Genesis
$0.570
Powell Electronics
$0.588
RS Americas
$0.910
$0.690
Element14
$0.960
$0.766
Waytek Inc.
$1.000
$0.812
$0.756
Mouser Electronics
$1.040
$0.781
$0.623
$0.561
Newark
$1.070
$0.804
$0.642
DigiKey
$1.150
$0.827
$0.738
$0.646
Master Electronics
$0.497
$0.466
Future Electronics
$0.530
$0.500
$0.480
Verical
$0.955
TTI
$0.549
$0.536
TTI Europe
$0.706
$0.547
Arrow
$0.291
Farnell
$2.180
$1.190
Chip1Stop
$1.270
Nova Conductors
$0.711
Chief Enterprises
$1.700
$1.360
Sensible Micro Corp
$0.405
$0.377
IBS Electronics
$0.729
$0.687
$0.659
NAC Semi
$0.964
Vyrian
Electro Sonic
$0.833
$0.518
$0.463
VNN
Rapid Electronics
$1.316
Ampacity Inc.
$0.433
Semicontronic
$0.422
$0.420
Argo Parts USA
$0.667
$0.647
Gateway Technologies
$0.670
$0.596
Netroflash
$0.696
Singapore Electronics
$0.737
$0.685
$0.655
$0.626
Allen Electronics Distributors
$0.980
$0.770
Continental Prestige Electronics
$0.984
$0.679
Corohmni
$1.279
Aztec Data Supply Inc.
$6.600
Advanced Electronics
$7.232
$6.581
$5.930
Eastek
$0.830
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
The compact body length makes this connector suitable for applications where space is limited.
The slim body width allows for easy installation in tight spaces or crowded PCB layouts.
The moderate body depth provides enough room for secure connections while keeping the overall size of the connector manageable.
Polyethylene is a durable and reliable insulator material that can withstand a wide range of temperatures, ensuring the connector's longevity and performance.
Having 2 rows loaded allows for a higher number of contacts in a compact design, making it a versatile connector for various applications.
The high maximum operating temperature makes this connector suitable for applications where heat resistance is crucial.
The low minimum operating temperature ensures that the connector can perform reliably even in extreme cold conditions.
As a combination line connector, this product offers versatility by accommodating different types of connections in a single unit.
The high rated current allows for the transmission of signals with minimal loss, making the connector suitable for high-performance applications.
With 3 contacts, this connector can support multiple connections within a single unit, reducing the need for additional components.
The cable mounting type offers flexibility in installation, allowing the connector to be easily integrated into different systems.
Crimp termination provides a secure and reliable connection, ensuring optimal signal transmission and minimizing the risk of disconnection.
The female contact gender allows for easy mating with male connectors, providing a reliable and stable connection for signal transmission.
The plug body style offers a user-friendly design for easy insertion and removal of the connector, simplifying maintenance and troubleshooting.
The round pin and socket contact style ensures a secure and stable connection, minimizing signal loss and ensuring reliable data transmission.
Combination Line Connectors AT06-3S-BLK attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
AT06-3S-BLK Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
General Transistor
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Tak Cheong Electronics Holdings
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
DT04-12PA-P026
TE Connectivity
TE Connectivity's DT04-12PA-P026 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and UL flammability rating of 94V-0.
DT06-6S-E005
TE Connectivity's DT06-6S-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with female contacts.
DTM04-6P-E003
TE Connectivity's DTM04-6P-E003 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DTM04-08PA
TE Connectivity's DTM04-08PA is a 2-row, 8-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, male receptacle with strain relief.
08T-JWPF-VSLE-D
J S T Mfg
08T-JWPF-VSLE-D by J S T Mfg is a waterproof combination line connector with 8 contacts. Made of POLYBUTYLENE TEREPHTHALATE, it has a UL Flammability Code of 94V-0. Ideal for cable mounting, this male crimp connector is suitable for various applications requiring secure and reliable connections.
1-207119-0
TE Connectivity 1-207119-0 is a Combination Line Connector with 0.196" Mating Contact Pitch, rated for 600V and 7.5A signal current. Ideal for board mounting applications, it features POLYAMIDE66 insulator material and tin finish contacts for durability in commercial settings.
12191914
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Manufacturer Series: 121919;
DT04-12PA-P075
TE Connectivity's DT04-12PA-P075 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
1-1703498-1
TE Connectivity 1-1703498-1 is a Combination Line Connector with dimensions of 0.583" x 1.732" x 0.589". It has a rated voltage of 14V and can operate b/w -40°C to 130°C. With UL certification, it features male SQ PIN-SKT contacts for signal currents up to 25A in cable mounting applications.
ATM06-3S
Amphenol
The Amphenol ATM06-3S is a combination line connector with 3 contacts, rated at 7.5A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has a body size of 0.642" x 0.638" x 1.087".
1600280013
Molex
Molex 1600280013 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has dimensions of 1.293" x 0.775" x 1.079", suitable for cable mounting applications. Operating temperature range from -40°C to 85°C, making it ideal for various industrial uses.
770680-1
TE Connectivity's 770680-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 23 contacts, rated at 17A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications with solder termination and polarized key design.
DT04-3P-EE01
TE Connectivity's DT04-3P-EE01 is a 2-row, 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
1-640524-0
TE Connectivity 1-640524-0 is a Combination Line Connector with 20 contacts, rated at 250V and 9A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.165" and operates b/w -55 to 85°C. Ideal for commercial applications requiring durable, polarized connectors with crimp termination.
DT06-4S
The TE Connectivity DT06-4S is a 4-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55°C to 125°C. It is used for cable mounting applications in commercial settings due to its durability, UL certification, and nickel termination contact finish.
DTP06-4S-E003
TE Connectivity's DTP06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring UL standards compliance.
54201412
Aptiv
Aptiv's 54201412 is a Combination Line Connector with dimensions of 1.311" x 0.882" x 0.945". It features POLYAMIDE insulator material, 3 rows loaded, and 14 FEMALE contacts. Ideal for automotive applications requiring reliable electrical connections in tight spaces.
DT06-12SA-EP06
TE Connectivity's DT06-12SA-EP06 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
1-480706-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Insulator Material: POLYAMIDE; Manufacturer Series: 480706;
180941
TE Connectivity 180941 is a Combination Line Connector with POLYAMIDE insulator. It has 3 contacts, operates b/w -40 to 105°C, and UL flammability rating of 94V-2. Used for cable mounting applications at 115/230VAC mains connector rating, featuring female contact gender in a receptacle shell style with latching option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT06-2S-LED1201
Amphenol's AT06-2S-LED1201 is a female combination line connector with 2 contacts, rated at 13A. It has a compact body measuring 0.768" x 0.692" x 1.693", ideal for cable mounting applications. Mates with AT06-2P-LED1201 plug connectors, suitable for various signal transmission needs.
AT06-2S-RD01
The Amphenol AT06-2S-RD01 is a combination line connector with 2 contacts, rated at 13A. Featuring a POLYETHYLENE insulator, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-2P-RD01 connectors for crimp termination in female plug configurations.
AT06-4S-MM01
The Amphenol AT06-4S-MM01 is a combination line connector with 4 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. With a compact body size of 0.902" x 0.815" x 1.05", it is ideal for cable mounting applications requiring female contact gender and round socket style connections.
AT06-2S
The Amphenol AT06-2S is a combination line connector with 2 contacts, rated for 13A signal current. Featuring a POLYETHYLENE insulator, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector uses crimp termination and round pin/socket contact style.
AT06-4S-SR02BLK
The Amphenol AT06-4S-SR02BLK is a 2-row combination line connector with 4 contacts, rated for 13A signal current. It has a compact body size of 0.906" x 0.815" x 1.728", suitable for cable mounting applications. Operating temperature range is -55°C to 125°C, making it ideal for various industrial and automotive uses.
AT06-4S-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Body Width: .717 inch; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
AT06-6S-RD01
The Amphenol AT06-6S-RD01 is a 2-row combination line connector with dimensions of 0.98" x 0.717" x 1.236". It has 6 contacts, rated for 13A signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-6P-RD01 connectors, featuring female gender and round pin-socket contact style.
AT06-2S-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Contact Style: RND PIN-SKT; Mixed Contacts: NO;
AT06-2S-SR02BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 2; Mixed Contacts: NO;
AT06-2S-LED2401
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; Total No. of Contacts: 2;
AT06-2S-KIT01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 125; Termination Type: CRIMP; Mixed Contacts: NO;
AT06-4S
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Body Length: .862 inch; Body Width: .717 inch;
AT06-2S-EC01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 13 A; Maximum Operating Temperature (Cel): 125; Body Length: .591 inch;
AT06-3S-RJ120
The Amphenol AT06-3S-RJ120 is a combination line connector with 3 contacts, suitable for cable mounting. Featuring polyethylene insulator material, it operates b/w -55°C to 125°C. With a compact body size of 0.744" x 0.665" x 1.248", it is ideal for applications requiring reliable female contact connections.
AT06-6S-SR01BLK
Amphenol's AT06-6S-SR01BLK is a 2-row combination line connector with 6 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact body size of 1.028" x 0.815" x 1.724".
AT06-6S
The Amphenol AT06-6S is a female combination line connector with 6 contacts, rated for 13A signal current. With a compact body size of 0.98" x 0.717" x 1.237", it operates b/w -55°C to 125°C, making it ideal for cable mounting applications.
AT06-6S-BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 125; Body Length: .98 inch; Minimum Operating Temperature: -55 Cel;
AT06-12SA-RD01
The Amphenol AT06-12SA-RD01 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Its polyethylene insulator ensures reliability in temperatures from -55°C to 125°C. Ideal for cable mounting applications, this female plug connector features round pin and socket contact style.
AT06-4S-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel; Contact Style: RND PIN-SKT; Mounting Type: CABLE;
AT06-12SA-MM01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Type: CABLE; Mixed Contacts: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved