Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$25.690
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$18.564
1k+ parts
$16.573
10k+ parts
-
Mouser Electronics
$17.720
$15.890
VNN
Vyrian
Nova Conductors
Corohmni
$2.713
Gateway Technologies
$6.000
$5.339
Aztec Data Supply Inc.
$6.306
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
AZTECH Wire
$11.300
$10.850
$10.640
$10.420
Ampacity Inc.
$18.300
Semicontronic
$17.842
$17.751
Argo Parts USA
Bastille Electronics
Electrical Wires & Cables 245107-02-06.00 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1554216004
Molex
WIRE AND CABLE;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
FFSD-13-D-08.00-01-N
Samtec
Samtec's FFSD-13-D-08.00-01-N is a UL-approved stranded cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a temperature range of -40 to 105°C and features 26 conductors in a flat cable design.
IDSD-20-D-06.00-P37-G
Samtec IDSD-20-D-06.00-P37-G is a UL approved stranded flat cable with 39 conductors, rated for 425V and 3.4A. Featuring tin-finished copper alloy conductors and PVC insulation, it operates b/w -20°C to 105°C. Ideal for applications requiring reliable electrical connections in various industries.
35110BK199
Alpha Wire
Alpha Wire 35110BK199 is a CE-approved electrical wire with stranded construction and polyethylene jacket. Featuring 300V rating, it has tin-finished copper alloy conductors suitable for flexible cord and fixture wire applications. With a temperature range of -30 to 80°C, this wire offers shielding and resistance of 0.054 ohm.
CAU3AB-1M
L-com
107-3
Standard Wire & Cable
Standard Wire & Cable 107-3 is a MIL-approved electrical wire with stranded construction, nylon jacket, and tin finish. It has a rated voltage of 600V, insulator made of PVC, and operates up to 105°C. Ideal for flexible cord and fixture wire applications due to its copper conductor material and resistance of 0.02 ohm.
M22759/44-22-9
TE Connectivity
TE Connectivity's M22759/44-22-9 cable is MIL-approved with a 600V rating, featuring stranded construction and silver conductor finish. With ETFE insulator material, it operates b/w -65 to 200°C, making it ideal for flexible cord and fixture wire applications.
M22759/11-22-0
Belden
Belden's M22759/11-22-0 wire is MIL-W-22759 approved with 600V rating, suitable for internal wiring in electronics. Features silver-coated copper alloy conductor, PTFE insulation, and can operate up to 200°C. Stranded construction with 19X34 stranding and 0.326 mm2 cross-section area make it a flexible cord and fixture wire choice.
M22759/11-22-9125
Carlisle Interconnect Technologies
Carlisle Interconnect Technologies' M22759/11-22-9125 wire is MIL-approved, stranded with silver finish, and PTFE-insulated. It operates b/w -55 to 200 °C, with a resistance of 0.0495 ohm. Ideal for smoke emission, overload stability, and flammability applications.
FFSD-05-D-02.00-01-N
FFSD-05-D-02.00-01-N by Samtec is a UL approved stranded flat cable with tin conductor finish and PVC insulation. It operates b/w -40 to 105°C, has 10 conductors, each with a cross-section area of 0.0509 mm2. Ideal for high reliability applications requiring a rated current of 2.3A.
1552200168
M22759/11-24-9
Allied Wire & Cable
WIRE AND CABLE; Shielding: NO; Conductor Finish: SILVER; Approvals (V): MIL; SAE; Wire Gauge (AWG): 24; Diameter: 1.143 mm;
82915
Delock
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: USB 2.0 B MALE; Rated Current: .5 A; Shielding: YES; Wire Gauge (AWG): 22;
M17/176-00002
Tri-star Electronics International
WIRE AND CABLE; Shielding: YES; MIL Conformity: YES; DIN Conformity: NO; No. of Conductors: 1; Insulator Material: PTFE;
45134
Helukabel
Helukabel 45134 is a CE-approved stranded flat cable with PVC jacket and tin finish. It has 20 conductors, each made of copper alloy with 0.09 mm2 cross-section area. Ideal for quick IDC connections, it operates b/w -20 to 80 °C, making it versatile for various electrical applications.
3051PK005
3051PK005 by Alpha Wire is a CSA/UL approved stranded wire with 300V rating. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to tinned copper conductor and 7X30 stranding.
XS6W-6LSZH8SS150CM-B
Omron
13230
Helukabel 13230 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE it's ideal for fixed installations. Featuring bare copper conductor and operating temperatures from -40 to 80°C, it's suitable for various electrical applications.
982670431
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;
3365/15100
3m Electronic Products Division
M22759/11-26-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire Gauge (AWG): 26; Approvals (V): MIL; SAE; No. of Conductors: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2451320410
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Additional Features: MICRO-FIT 3.0;
2451320610
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Diameter: 5.5 mm;
245106-02-06.00
Amphenol
2451320210
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20;
245106-02-18.00
2451320630
Molex 2451320630 wire is UL approved with 300V rating, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for secure connections in electrical setups.
245110-08-03.00
2451300430
2451300210
2451300205
2451300420
2451321010
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Application: POWER;
2451321020
Molex 2451321020 wire is rated for 300V, AWG 20 gauge, with a diameter of 5.5mm. It features MICRO-FIT 3.0 connectors on both sides and is commonly used in power applications.
245108-01-06.00
2451301020
2451351005
2451320230
2451320430
2451320405
245107-02-24.00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved