Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$14.236
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$2.443
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$3.190
Verical
$14.692
Mouser Electronics
$27.500
$20.790
$19.530
DigiKey
$27.530
$19.888
$17.756
Powell Electronics
$13.780
Nova Conductors
$14.906
VNN
Vyrian
Ampacity Inc.
$2.600
Semicontronic
$2.535
$2.522
AZTECH Wire
$6.804
Aztec Data Supply Inc.
$7.042
Corohmni
$7.202
Continental Prestige Electronics
$14.470
$14.181
Gateway Technologies
$13.266
Singapore Electronics
$16.396
$15.248
$14.592
$13.936
Advanced Electronics
$17.291
$15.908
Argo Parts USA
Netroflash
$14.608
$14.161
$13.862
Electrical Wires & Cables 245106-02-18.00 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Synsemi
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
Microsemi
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Diotec Semiconductor Ag
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
Vishay Telefunken
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
82A1813-1-3-3-F871
TE Connectivity
TE Connectivity's 82A1813-1-3-3-F871 is a flexible cord with copper alloy conductor, nickel finish, and rated voltage of 600V. With operating temperatures from -65°C to 200°C, it is ideal for applications requiring high flexibility and durability in electrical wiring systems.
23323
Lapp Group Pvt
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Jacket Material: POLYURETHANE; DIN Conformity: NO; Approvals (V): CE; EAC;
M22759/11-26-9
Harbour Industries
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Stranding: 19X38; Conductor Finish: SILVER;
FFSD-20-D-12.00-01-N
Samtec
Samtec's FFSD-20-D-12.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 7X38 stranding. It operates b/w -40 to 105°C, has 40 conductors of AWG 30 wire gauge, and a cross-section area of 0.0509 mm2. Ideal for high-reliability applications requiring a rated current of 2.3A.
88732-8902
Molex
Molex 88732-8902 cable features shielding, rated voltage of 30V, and insulator material polyester. It is a USB A 2.0 MALE to USB MINI-B MALE cable with 5 conductors, suitable for applications requiring a current rating of 1A.
797580014
CABLE ASSEMBLY; Connector Side-1: TERMINAL; Connector Side-2: TERMINAL; Shielding: NO; MIL Conformity: NO; DIN Conformity: NO;
55A0111-22-96
TE Connectivity's 55A0111-22-96 is a stranded electrical wire with a rated voltage of 600V and conductor finish of TIN. It is used for general purpose applications, lightweight, and has a max operating temperature of 150°C.
U050-010
Tripp Lite
TCSD-25-D-06.00-01-N
Samtec's TCSD-25-D-06.00-01-N is a UL-approved stranded cable with 300V rating, TIN finish, and PVC insulation. Ideal for applications requiring a flat cable design, it features 50 conductors of copper alloy with a cross-section area of 0.081mm2. Operating temperatures range from -40 to 105°C.
5201
Quabbin Wire & Cable
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO; No. of Conductors: 4; Length: 100 mm;
115101-01-M0.25
Amphenol
97946061000
Belden
WIRE AND CABLE;
M22759/11-24-9
Defense Logistics Agency
M22759/11-24-9 by Defense Logistics Agency is a MIL-approved electrical wire with stranded construction, silver finish, and extruded TFE insulator. Rated for 600V, it has a max temp of 200°C. Ideal for flexible cord and fixture wire applications.
M81044/12-26-9
TE Connectivity's M81044/12-26-9 is a MIL-DTL-81044 compliant wire with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65 to 150°C, has 26 AWG size, 0.15 mm2 area, and 19X38 stranding. Ideal for flexible cord and fixture wire applications.
135101-01-M0.75
3365/12
3m Electronic Products Division
The 3m Electronic Products Division's 3365/12 is a UL-approved FLAT FLEXIBLE CABLE with 12 TINNED COPPER conductors. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20°C to 105°C. Ideal for applications requiring flexibility and durability in electrical wiring setups.
2273107-4
TE Connectivity's 2273107-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for straight mounting with M12 screw option. Ideal for electrical wiring applications requiring reliable performance in various environments.
M22759/11-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with silver finish, rated for 600V. Constructed with copper conductor, extruded PTFE insulator, and operating temperature up to 200°C. Ideal for flexible cord and fixture wire applications.
31897
Wentronic
CABLE ASSEMBLY; Connector Side-1: HDMI A PLUG; Connector Side-2: HDMI A PLUG; Shielding: YES; Cross Section Area: .051 mm2; Length: 15 mm;
115101-20-120
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2451320410
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Additional Features: MICRO-FIT 3.0;
2451320610
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Diameter: 5.5 mm;
245106-02-06.00
2451320210
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20;
2451320630
Molex 2451320630 wire is UL approved with 300V rating, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for secure connections in electrical setups.
245110-08-03.00
2451300430
2451300210
2451300205
2451300420
2451321010
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Application: POWER;
2451321020
Molex 2451321020 wire is rated for 300V, AWG 20 gauge, with a diameter of 5.5mm. It features MICRO-FIT 3.0 connectors on both sides and is commonly used in power applications.
245108-01-06.00
245107-02-06.00
2451301020
2451351005
2451320230
2451320430
2451320405
245106-02-12.00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved