Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$29.420
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$19.960
1k+ parts
$19.030
10k+ parts
-
Nova Conductors
$15.056
VNN
Vyrian
Aztec Data Supply Inc.
$3.630
Advanced Electronics
$6.694
$6.359
Corohmni
$7.616
Ampacity Inc.
$12.180
Semicontronic
$11.876
$11.815
Netroflash
Gateway Technologies
$13.399
Singapore Electronics
$16.561
$15.401
$14.739
$14.076
AZTECH Wire
$16.687
Continental Prestige Electronics
Argo Parts USA
Electrical Wires & Cables 245110-08-03.00 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Itt Semiconductor
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
DCPLUG-P1J-R7B
Mean Well Enterprises
U2A00007-36I
Infinite Electronics International
M22759/11-22-9
Specialty Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: COPPER; Conductor Finish: SILVER; Wire Gauge (AWG): 22;
36212
Lindy International
The Lindy International 36212 cable features UL approval, PVC jacket, and copper conductor. With DVI-D male to female connectors, it is ideal for electrical connections requiring shielding. Operating temperatures range from -20°C to 80°C with a wire gauge of 28 AWG and diameter of 8.6 mm.
55PC1121-22-8/98-9
TE Connectivity's 55PC1121-22-8/98-9 is a 600V rated wire with TIN finish, suitable for -65 to 150°C. Featuring copper alloy conductor and 22 AWG gauge, it is ideal for FLEXIBLE CORD AND FIXTURE WIRE applications under SPEC 55 category.
L-com
3600B/26SF
3m Electronic Products Division
3m Electronic Products Division's 3600B/26SF wire is a POWER-LIMITED cable with 26 conductors, shielded and approved by CUL & UL for 150V. Featuring STRANDED construction, TIN finish, and PVC jacket, it is ideal for electrical applications requiring flexibility and durability.
UT232R-500
FTDI
UT232R-500 by FTDI is a 5mm long communication cable with USB A and RS232 connectors. It operates b/w -20°C to 80°C, making it suitable for various electrical applications.
30028
Helukabel
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; DIN Conformity: NO; Cross Section Area: 25 mm2; MIL Conformity: NO;
F9TSPXNXNSNF040
Panduit
5010/30CBK199
Alpha Wire
Alpha Wire 5010/30CBK199 is a 300V stranded wire with PVC jacket, suitable for flexible cord and fixture applications. Featuring 7x30 stranding, tin finish copper alloy conductor, and -35 to 105°C operating temperature range, it offers 0.326 mm2 cross section area and 0.054 ohm resistance.
444031A10M010
Molex
P502-050
Tripp Lite
HFBR-RUS100Z
Broadcom
WIRE AND CABLE; Shielding: NO; Maximum Operating Temperature: 85 Cel; Approvals (V): UL; Length: 100 mm; Application: TELECOMMUNICATION SWITCHING SYSTEM, MEDICAL INSTRUMENTS;
5010/25CBK199
Alpha Wire 5010/25CBK199 is a flexible cord with 25 conductors, rated at 300V. Constructed with PVC jacket and tin finish copper alloy conductor, it operates b/w -35 to 105°C. Ideal for applications requiring UL, CSA, CE approvals in electrical wiring setups.
45135
Helukabel 45135 is a CE-approved stranded flat cable with PVC jacket and tin finish. With 24 conductors, it's ideal for quick IDC connections at 300V. Operating from -20 to 80°C, this cable has a cross-section area of 0.09mm2 and resistance of 0.23 ohm, making it suitable for various electrical applications.
U025-001-PM
59275
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: YES; Application: MARINE/OFFSHORE APPLICATION; Diameter: 14 mm; DIN Conformity: NO;
45134
Helukabel 45134 is a CE-approved stranded flat cable with PVC jacket and tin finish. It has 20 conductors, each made of copper alloy with 0.09 mm2 cross-section area. Ideal for quick IDC connections, it operates b/w -20 to 80 °C, making it versatile for various electrical applications.
FFSD-05-D-04.00-01-N
Samtec
Samtec's FFSD-05-D-04.00-01-N is a UL-approved stranded cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a temperature range of -40 to 105°C, 7X38 stranding, and rated current of 2.3A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2451320410
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Additional Features: MICRO-FIT 3.0;
2451320610
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Diameter: 5.5 mm;
245106-02-06.00
Amphenol
2451320210
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20;
245106-02-18.00
2451320630
Molex 2451320630 wire is UL approved with 300V rating, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for secure connections in electrical setups.
2451300430
2451300210
2451300205
2451300420
2451321010
CABLE ASSEMBLY; Connector Side-1: MICRO-FIT 3.0; Connector Side-2: MICRO-FIT 3.0; Rated Voltage: 300 V; Shielding: NO; Application: POWER;
2451321020
Molex 2451321020 wire is rated for 300V, AWG 20 gauge, with a diameter of 5.5mm. It features MICRO-FIT 3.0 connectors on both sides and is commonly used in power applications.
245108-01-06.00
245107-02-06.00
2451301020
2451351005
2451320230
2451320430
2451320405
245110-08-06.00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved