Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 142191-75 is a RF SMB connector with 75 ohm impedance, gold shell finish, and PTFE insulator. Ideal for panel mounting in commercial applications, it uses RG-179/U cable type and features a male contact gender with jack body style.
Median Price
$6.833
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$8.290
100+ parts
$5.980
1k+ parts
$5.090
10k+ parts
-
DigiKey
$5.988
Powell Electronics
$4.680
$3.660
Master Electronics
$5.376
$4.263
$4.221
Verical
Nova Conductors
$4.400
Vyrian
VNN
American Connector Supply Corp
Electro Sonic
$5.600
$4.290
$4.230
IBS Electronics
$6.213
$4.600
$4.516
Ampacity Inc.
$3.480
Netroflash
$4.312
Gateway Technologies
$3.916
Singapore Electronics
$4.840
$4.501
$4.307
$4.113
Advanced Electronics
$10.233
$10.131
$9.722
AZTECH Wire
$19.326
Kepictronics
Perfect Parts
The panel mount feature allows for easy installation and secure connection to a panel or chassis, making it convenient for use in various applications.
The compact body depth of 0.438 inch allows for space-efficient installation, ideal for applications where space is limited.
The use of POLYTETRAFLUOROETHYLENE as insulator material provides excellent electrical insulation properties and ensures reliable performance in different environmental conditions.
The GOLD shell finish not only adds a premium look but also offers high conductivity for efficient signal transmission.
Being an RF SMB connector, this product is suitable for high-frequency applications with reliable signal transmission capabilities.
The natural insulator color helps in easy identification and maintenance of the connector, ensuring smooth operations.
With a characteristic impedance of 75 ohm, this connector is optimized for matching the impedance of the connected devices, reducing signal reflections.
The use of BRASS as shell material provides durability and corrosion resistance, making the connector suitable for various industrial environments.
Compatible with RG-179/U cable types, offering flexibility in cable selection while maintaining reliable electrical connections.
The MALE contact gender ensures compatibility with FEMALE connectors, allowing for easy mating and secure connections.
The JACK body or shell style is commonly used in RF connectors, providing a standard interface for easy integration into existing systems.
The STRAIGHT mounting style offers a straightforward and simple installation process, suitable for applications where a straight connection is required.
The COAX contact style ensures proper coaxial connections, maintaining the integrity of the signal path and reducing interference.
The LOCKING mounting option provides a secure and stable connection, preventing accidental disconnection and ensuring reliable performance.
Designed for commercial use, this connector offers reliable performance and durability, making it a dependable choice for various commercial applications.
SSMB Connectors 142191-75 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
No. of Ports:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Total No. of Contacts:
142191-75 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0520LT1
Motorola
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
131-3701-411
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Mounting Style: STRAIGHT;
413985-3
TE Connectivity
TE Connectivity 413985-3 is a RF SMB Connector with 0.3 dB Insertion Loss, SNAP Coupling Type, and PTFE Insulator. It operates b/w -65 to 165 °C, suitable for RG 188/316/174 cables in applications up to 4 GHz frequency. The connector features a nickel finish brass shell, crimp termination, and female contact gender.
414002-3
TE Connectivity's 414002-3 SSMB Connector features 0.25" body diameter, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications with a max operating frequency of 4 GHz, this connector is designed for durability with a shell material of brass and termination type of crimp.
1-1337482-0
TE Connectivity 1-1337482-0 is a RF SMB CONNECTOR with characteristic impedance of 50 ohm. It has PTFE insulator, gold shell finish, and operates b/w -65 to 165 °C. Ideal for applications requiring high frequency up to 4 GHz, such as in board mounting configurations.
R115427000
Radiall S A
Radiall S A's R115427000 RF SMB Connector has a characteristic impedance of 50 ohm, gold termination finish, and operates up to 4 GHz. Ideal for board mounting applications in industries requiring MIL and IEC conformity with female contact gender.
1060464-1
TE Connectivity's 1060464-1 SSMB Connector features a body size of 0.25" x 0.25" x 0.525", PTFE insulation, and gold shell finish. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 4 GHz. Suitable for commercial use with durability of 500 cycles in board mounting configurations.
R114205000
The Radiall S A R114205000 RF SMB Connector has low insertion loss of 0.05 dB and high VSWR of 1.35, suitable for up to 4 GHz frequency applications. With gold termination finish and MIL/IEC conformity, it is ideal for 50 ohm cable connections requiring snap coupling in RF systems.
131-3711-201
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE; Insertion Loss: .3 dB;
413990-1
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
R114.665.000W
R114.665.000W by Radiall S A is a RF SMB connector with gold over nickel termination, PTFE insulator, and 50 ohm impedance. It is panel mountable and suitable for applications requiring high durability, such as in commercial settings up to 4 GHz frequency range. Withstanding voltage of 1000VAC and operating temperatures from -65 to 165 °C make it versatile for various environments.
82_SMB-50-0-17/111_NH
Huber+suhner Ag
82_SMB-50-0-17/111_NH by Huber+suhner Ag is an RF SMB CONNECTOR with characteristic impedance of 50 ohm, suitable for applications up to 4 GHz. It features GOLD OVER NICKEL finish, SNAP coupling type, and PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, making it MIL and IEC conformant. Ideal for board mounting in various electronic systems requiring reliable signal transmission.
73100-0097
Molex
Molex 73100-0097 SSMB Connector features 0.6 dB insertion loss, 1.43 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
73100-0103
73100-0103 by Molex is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1.3 VSWR. Ideal for board mounting in applications up to 4 GHz requiring reliable commercial-grade connectors with gold/nickel finish and PTFE insulator.
Bel Fuse
Bel Fuse 131-3711-201 is a RF SMB connector with 50 ohm impedance, 1400VAC dielectric voltage, and -65 to 165 °C operating range. Ideal for commercial applications requiring durable, male contact right angle mounting on boards at up to 4 GHz frequency.
5414337-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Filter Feature: NO; Manufacturer Series: 5414337;
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
SMB7H-J-P-H-RA-TH1
Samtec
Samtec's SMB7H-J-P-H-RA-TH1 is a RF SMB connector with gold over nickel finish, snap coupling type, and PTFE insulator. Ideal for applications requiring 75 ohm impedance, it operates b/w -65 to 165 °C with VSWR of 1.3 up to 4 GHz frequency on board mounting in right angle configuration.
SMB7H-J-P-H-ST-EM1
Samtec's SMB7H-J-P-H-ST-EM1 is a RF SMB connector with 75 ohm impedance, 1.3 VSWR, and 4 GHz frequency range. Ideal for board mounting applications requiring surface mount termination with gold over nickel finish for high-quality signal transmission.
SMB7H-J-P-HN-RA-TH1
Samtec's SMB7H-J-P-HN-RA-TH1 is a RF SMB connector with 75 ohm impedance and 4 GHz frequency. Featuring gold over nickel termination, it has a voltage standing wave ratio of 1.3. Ideal for board mounting applications requiring right angle coupling in SSMB connectors.
142186-75
Amphenol 142186-75 is a RF SMB connector with 75 ohm impedance, gold shell finish, and PTFE insulator. It is used for RG-179/U cable termination in commercial applications requiring reliable coax connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142194-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Mounting Type: CABLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
142138-75
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .276 inch; Filter Feature: NO;
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Characteristic Impedance: 75 ohm; Manufacturer Series: 142186-75;
142194
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: SNAP; Termination Contact Finish: GOLD;
142186
Amphenol's 142186 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this female connector with crimp solder termination is designed for cable mounting in straight orientation.
142176-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Termination Type: CRIMP; No. of Ports: 1; Mounting Style: RIGHT ANGLE; Mounting Option-1: LOCKING;
142134
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Panel Mount: NO; Coupling Type: SNAP;
142146
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Termination Contact Finish: GOLD;
142187
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: PLUG; Filter Feature: NO;
142191
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Panel Mount: YES; Coupling Type: SNAP;
142134-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Mounting Option-1: LOCKING; Insulator Material: POLYTETRAFLUOROETHYLENE; Body Width: .276 inch; Shell Finish: GOLD;
142154
RF SMB CONNECTOR; Reliability: COMMERCIAL; Manufacturer Series: 142154; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL; Contact Style: COAX;
142158-10
RF SMB CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Body Depth: .035 inch; Contact Style: COAX; Panel Mount: YES;
142179-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Cable Types: RG-179/U; Insulator Color: NATURAL;
142181-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Total No. of Contacts: 1;
142184-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Terminal Length: .155 inch; Mounting Option-1: LOCKING; Characteristic Impedance: 75 ohm; Termination Contact Finish: NOT APPLICABLE;
142190-75
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Cable Types: RG-179; Shell Finish: GOLD;
142162
RF SMB CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Mounting Option-1: LOCKING; Shell Finish: GOLD; Shell Material: BRASS;
142146-11
RF SMB CONNECTOR; Reliability: COMMERCIAL; Mounting Style: RIGHT ANGLE; Shell Material: BRASS; Body Width: .276 inch; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved