Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132141 is an RF SMA connector with gold-plated contacts, threaded coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and male contact gender. Ideal for panel mounting in applications requiring reliable signal transmission at high frequencies.
Median Price
$12.390
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$7.350
100+ parts
$5.270
1k+ parts
-
10k+ parts
DigiKey
$8.948
$7.607
Powell Electronics
$13.940
$9.420
Mouser Electronics
$13.960
$10.790
$9.210
Element14
$14.210
$11.440
$10.200
Verical
$10.365
Master Electronics
$8.140
VNN
Vyrian
Nova Conductors
Microwave Components, LLC
Speed Components Ltd
IBS Electronics
$12.104
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$5.240
Continental Prestige Electronics
$8.420
$6.310
Gateway Technologies
$10.000
$8.900
Singapore Electronics
$11.000
$10.230
$9.790
$9.349
Eastek
$129.830
Kepictronics
Argo Parts USA
Netroflash
GreenTree Electronics
Abacus Technologies
Allows for easy and secure mounting on a panel, ensuring stability during use.
Gold contact finish provides excellent conductivity and resistance to corrosion, enhancing the overall performance and longevity of the connector.
Meets military specifications for quality and reliability, making it suitable for demanding applications where durability is critical.
Threaded coupling ensures a secure and reliable connection, minimizing the risk of disconnecting accidentally during operation.
Polytetrafluoroethylene provides excellent electrical insulation and thermal stability, making the connector suitable for high-frequency applications.
RF SMA connector is a widely used standard in RF applications, ensuring compatibility with a wide range of equipment and systems.
Gold mating contact finish ensures consistent signal transmission and minimizes signal loss, making it ideal for high-frequency applications.
Matches the impedance requirement of many RF systems, ensuring optimal signal transfer and minimizing reflections.
Solder termination provides a reliable and durable connection, suitable for applications where stability and longevity are essential.
Male contact gender is commonly used in RF applications, ensuring compatibility with a wide range of connectors and equipment.
Receptacle style body or shell offers a secure and protected connection, suitable for applications where environmental protection is required.
Straight mounting style allows for easy installation and alignment, making it suitable for applications where space is limited.
SSMA Connectors 132141 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mounting Style:
Option:
Panel Mount:
Termination Type:
132141 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
4910-14-400-0665, 4910144000665, 5315-22-305-6658, 5315223056658, 5905-00-212-8667, 5905002128667, 5962-23-112-2370, 5962231122370
NIIN
144000665, 223056658, 002128667, 231122370
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Cheng-yi Electronic
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDLL4148
32K145-400L5
Rosenberger Hochfrequenztechnik & Kg
The Rosenberger SSMA Connector 32K145-400L5 features a low insertion loss of 0.17 dB and high VSWR of 1.3, suitable for RF applications up to 18 GHz. With a threaded coupling type and PTFE insulator, it is ideal for board and panel mounting in temperature ranges from -55°C to 155°C. This female jack connector has a characteristic impedance of 50 ohms, making it versatile for various RF applications.
142-0701-201
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Manufacturer Series: SMA; Panel Mount: NO;
M39012/83B3004
TE Connectivity
TE Connectivity's M39012/83B3004 SSMA Connector features 0.13 dB insertion loss, 1.23 VSWR, and 18 GHz max operating frequency. Ideal for RF applications, it has threaded coupling, PTFE insulator, and crimp termination for 50 ohm impedance. Suitable for cable and panel mounting with female contact gender.
1045497-1
TE Connectivity's 1045497-1 SSMA Connector features Insulation Resistance of 5e9 ohm, Insertion Loss of 0.04 dB, and Coupling Type: THREADED. Ideal for RF applications with a max operating frequency of 38 GHz, this connector is designed for use with cable types RG 188, RG 179, RG 187, and RG 316.
1052962-1
TE Connectivity's 1052962-1 SSMA Connector has a body length of 0.375", insertion loss of 0.07 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this threaded connector features a max operating frequency of 12.4 GHz and is designed with a characteristic impedance of 50 ohm.
73251-0930
Molex
The Molex 73251-0930 is an RF SMA connector with a characteristic impedance of 50 ohm and gold shell finish. It uses RG-316 cable types, has a body depth of 0.45 inch, and features a brass shell material. This SSMA connector is commonly used in commercial applications requiring reliable coax connections.
142-0403-011
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .21 dB; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
142-0701-841
Bel Fuse
The Bel Fuse 142-0701-841 SSMA Connector features a body length of 0.375", dielectric voltage of 1400VAC, and operating temperature range from -65 to 165°C. Ideal for RF applications, this female connector with 50 ohm impedance is designed for board mounting in commercial settings with durability up to 500 cycles.
16_SMA-50-2-112/133_NE
Huber+suhner Ag
16_SMA-50-2-112/133_NE by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 18 GHz. It features a threaded coupling type, brass shell material, and polytetrafluoroethylene insulator for durability in commercial applications. Suitable for cable mounting with crimp solder termination, this connector offers a low VSWR of 1.11 for reliable signal transmission.
73391-0320
Molex 73391-0320 is an RF SMA connector with gold/nickel termination, threaded coupling, and PTFE insulator. Ideal for board mounting in commercial applications, featuring a 50 ohm impedance and male contact gender. Suitable for right-angle installations with locking mounting option.
1050762-1
TE Connectivity 1050762-1 is an RF SMA connector with 50 ohm impedance, 0.15 dB insertion loss, and 1.18 VSWR. Ideal for RG 402 semi-rigid cables in applications requiring threaded coupling and TFE insulator material. Operating temperature range from -65 to 105 °C with gold shell finish for commercial reliability.
142-0771-831
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 26.5 GHz; DIN Conformance: NO; Mounting Style: STRAIGHT;
132289
Amphenol
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
BJ76
Trompeter Electronics
RF TRIAXIAL CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body Depth: 1.312 inch; Minimum Operating Temperature: -65 Cel;
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
R125238000
Radiall S A
R125238000 by Radiall S A is an RF SMA connector with a 50 ohm impedance and 0.21 dB insertion loss. Featuring gold termination contacts, it operates up to 12.4 GHz and is ideal for hermetic applications requiring a threaded coupling type. The connector's PTFE insulator ensures reliable performance in high-frequency environments.
R125176000
The Radiall S A R125176000 SSMA Connector features 0.25 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with a characteristic impedance of 50 ohm. Suitable for cable mounting with right angle plug style.
R125.238.000
Radiall S A's R125.238.000 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.21 dB and can operate at frequencies up to 12.4 GHz, making it suitable for high-frequency applications in the telecommunications industry.
142-0711-301
Bel Fuse's 142-0711-301 is an RF SMA connector with a body length of 0.25", width of 0.325", and depth of 0.525". It has a max operating frequency of 18 GHz and is commonly used in commercial applications.
32K101-400L5
32K101-400L5 by Rosenberger is an RF SMA connector with 0.17 dB insertion loss, 5000000000 ohm insulation resistance, and 1.3 VSWR. It is used in applications requiring a durable, threaded coupling type connector for up to 18 GHz frequency operations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132136
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
132170-12N
RF SMA CONNECTOR;
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132111
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
132117
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Color: NATURAL; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved