Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$0.153
$0.147
Northwest PG Solutions
$0.168
$0.148
AZTECH Wire
$18.470
Ampacity Inc.
$19.000
One Stop Electronics
$24.000
Semicontronic
$25.000
$24.375
$24.250
Modulus Dynamics
$75.803
Component Stockers USA
$99.990
Texas Native Microelectronics
$106.307
$102.055
$98.866
Kenton Components
$127.568
$112.260
Microchip USA
$285.102
Qasali Group International
$275.548
$252.585
MARBEL Systems
Supply Digital
Vigor
Corphita
Corohmni
Programmable Logic Devices (PLD) EPM7128SQC160-6F attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM7128SQC160-6F Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - MAX7000 Series EOL 30/Jun/2005
PCN Packaging - All Dev Pkg Chg 1/Aug/2018
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
XC95144XL-7TQG100C
Xilinx
The Xilinx XC95144XL-7TQG100C is a 144 macrocell CMOS PLD with 81 I/O lines. It has a propagation delay of 7.5 ns and operates at a max clock frequency of 138.88 MHz. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems.
XC2C512-10PQG208C
The Xilinx XC2C512-10PQG208C is a 512 macrocell FLASH PLD with 173 I/O lines, operating at a max clock frequency of 91 MHz. It features a propagation delay of 10 ns and can be used in applications requiring programmable logic devices with in-system programmability and JTAG boundary scan testing capabilities.
5M160ZT100I5N
Intel
5M160ZT100I5N by Intel is a PLD with 128 macro cells, 14 ns propagation delay, and 118.3 MHz max clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EPM240M100C5N
The Intel EPM240M100C5N is a FLASH PLD with 192 macro cells, 80 inputs/outputs, and 7.5 ns propagation delay. It uses CMOS technology, operates at a max temp of 85°C, and has JTAG boundary scan test capability. Ideal for applications requiring programmable logic devices with fast signal processing and high I/O count in compact form factors.
EPF10K20RC240-4
Intel's EPF10K20RC240-4 is a PLD with 1152 logic cells, 0.6 ns propagation delay, and 67.11 MHz max clock frequency. Ideal for applications requiring high-speed processing and complex logic functions in commercial temperature environments. Features include 189 I/O lines, 4 dedicated inputs, and a flatpack package style with gull wing terminals.
EPM7128SQI100-10
EPM7128SQI100-10 by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can handle a max supply voltage of 5.5 V. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
5M570ZT144C5
Altera
The Altera 5M570ZT144C5 is a programmable logic device with a propagation delay of 17.7 ns, maximum supply voltage of 1.89 V, and 144 terminals. It is a flash PLD used for applications such as macrocell output functions.
EPM240T100C4N
Intel's EPM240T100C4N is a PLD with 192 macro cells, 80 inputs/outputs, and 6.1ns propagation delay. Ideal for applications requiring fast processing speeds and high I/O capacity in compact designs. Its CMOS technology and in-system programmability make it versatile for various electronic projects.
XC2C128-7VQ100C
XC2C128-7VQ100C by Xilinx is a 128 macrocell FLASH PLD with 80 I/O lines, 7.5 ns propagation delay, and 119 MHz max clock frequency. Ideal for applications requiring in-system programmability and PLA-type architecture in commercial-grade environments.
ATF16LV8C-10JU
ATF16LV8C-10JU by Microchip Technology is a 3.3/5V CMOS FLASH PLD with 18 inputs, 8 I/O lines, and 64 product terms. It has a propagation delay of 10ns and operates at a max clock frequency of 71MHz. Ideal for industrial applications requiring fast logic processing in programmable logic devices (PLDs).
EPM3032ATC44-7
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
5M570ZT144C4
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128AETC100-5N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPF10K10ATI144-3N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
ATF16V8CZ-15JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
XC95288XL-10PQG208I
XC95288XL-10PQG208I by Xilinx is a 288 macrocell FLASH PLD with 168 I/O lines, operating at up to 100 MHz. It features a propagation delay of 10 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing in a compact square package with gull wing terminals.
M4A5-64/32-12VI48
Lattice Semiconductor
M4A5-64/32-12VI48 by Lattice Semiconductor is a 64 macrocell EE PLD with 32 I/O lines, operating at up to 52.6 MHz clock frequency. It features a propagation delay of 12 ns and can be in-system programmable for various industrial applications requiring high-speed processing and low power consumption. The device comes in a square flatpack package with Gull Wing terminals, suitable for surface mount assembly.
EP20K100EQC240-2N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
GAL22V10D-25QJN
GAL22V10D-25QJN by Lattice Semiconductor is a CMOS PLD with 25 ns propagation delay, 132 product terms, and 33.3 MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature range. Package: CHIP CARRIER, Surface Mount: YES, Outputs: 10.
ATF16V8BQL-15SU
ATF16V8BQL-15SU by Microchip is a PLD with 15ns propagation delay, 18 inputs, and 64 product terms. It is used in applications requiring a max clock frequency of 45MHz, such as industrial control systems and embedded designs. With surface mount capability and small outline packaging, it offers versatile integration options for various projects.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
Intel's EPM7128AETC100-5N is a 128 macrocell EE PLD with 5ns propagation delay and 192.3MHz clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at max temp of 70°C, and has a package style of flatpack with low profile and fine pitch.
EPM7128SQI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
EPM7064AETI100-7N
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM7256AETI144-7N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
EPM7128STI100-10N by Intel is a 128 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in industrial applications, featuring in-system programmability, JTAG boundary scan test, and 84 I/O lines for versatile connectivity.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved