Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip Technology's ATF1504ASL-25AU100 is a 64 macrocell EE PLD with 25ns propagation delay and 60MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test, and operates at temperatures ranging from -40 to 85°C.
Median Price
$6.260
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Future Electronics
1+ parts
$5.420
100+ parts
$5.210
1k+ parts
$4.970
10k+ parts
-
Farnell
$5.510
$5.140
Avnet
$5.663
Arrow
$5.982
Mouser Electronics
$6.020
Newark
$6.430
$6.350
$6.100
$5.840
Microchip Technology
$6.890
$5.670
$5.230
DigiKey
$6.025
Element14
$9.850
$8.770
Master Electronics
$5.430
$5.260
Verical
$6.388
$6.200
Digiode
$5.234
NAC Semi
$7.090
$6.030
Nova Conductors
$7.099
VNN
Chip Stock
IBS Electronics
$7.237
$7.966
Vyrian
VRG Components
Electro Sonic
$6.610
$5.910
Vectronix, Inc
Connector Distribution Corp
Right Parts Inc.
Semicontronic
$3.220
$3.140
$3.123
Ampacity Inc.
Continental Prestige Electronics
$3.680
$3.610
Corphita
$4.959
Corohmni
$6.750
Advanced Electronics
$6.952
$6.605
Netroflash
$6.744
$6.602
Vigor
$10.000
Microchip USA
$19.292
Aztec Data Supply Inc.
$48.680
Andel Nordic
$69.600
$48.717
Marpe Global Electronics
QualityLine Systems
Glotronic Ltd.
XL Components Corporation
Argo Parts USA
Perfect Parts
Authorized Procurement Solutions
Supply Digital
Kepictronics
Low propagation delay ensures fast signal processing and high performance of the device.
Having 64 macro cells allows for complex programmable logic designs to be implemented and executed efficiently.
In-system programmability provides flexibility for updating the programming without the need to physically remove and replace the device.
High clock frequency capability allows for quick processing of signals and data, making it suitable for time-sensitive applications.
Programmable Logic Devices (PLD) ATF1504ASL-25AU100 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
In-System Programmable:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Macro Cells:
No. of Product Terms:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
ATF1504ASL-25AU100 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1552200168
Molex
WIRE AND CABLE;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Sensitron Semiconductor
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
AT22V10-15DM
Atmel
AT22V10-15DM by Atmel is a UV PLD with 132 product terms, 11 dedicated inputs, and 10 I/O lines. It operates at a max clock frequency of 50 MHz and has a propagation delay of 15 ns. This PAL-type programmable logic device is commonly used in military-grade applications due to its MILITARY temperature grading.
M4A5-96/48-55VNC
Lattice Semiconductor
M4A5-96/48-55VNC by Lattice Semiconductor is a 96 macrocell EE PLD with 48 I/O lines. It features a propagation delay of 5.5 ns, operates at a max clock frequency of 105 MHz, and has in-system programmability. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
LC4256V-75TN100C
LC4256V-75TN100C by Lattice Semiconductor is a 3.3V EE PLD with 256 macro cells, 74 inputs, and 64 I/O lines. It has a propagation delay of 7.5 ns and operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and high-speed data processing in compact electronic designs.
ATF22V10C-5JX
Microchip Technology's ATF22V10C-5JX is a 5.5V CMOS PLD with 5ns propagation delay, ideal for PAL-type architecture applications. Featuring 22 inputs, 10 I/O lines, and 10 dedicated inputs, this flash PLD offers a max clock frequency of 142MHz in a square chip carrier package.
EPM570M100C5N
Intel
The Intel EPM570M100C5N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. It is used in applications requiring programmable logic devices with in-system programmability and JTAG boundary scan testing capabilities.
ATF22V10CQZ-20JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
XC95144XL-10TQ100I
Xilinx
The Xilinx XC95144XL-10TQ100I is a 144 macrocell FLASH PLD with 81 I/O lines, operating at a max clock frequency of 81.3 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities.
ATF16V8CZ-15JU
ATF16V8CZ-15JU by Microchip Technology is a 5.5V PLD with 15ns propagation delay, suitable for industrial applications. Featuring 64 product terms and 8 I/O lines, it operates at up to 45MHz clock frequency in temperatures ranging from -40°C to 85°C. This flash PLD in square chip carrier package offers versatile programmable logic solutions.
EPM240T100I5N
Altera
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE; Output Function: MACROCELL;
EPM7128SQC100-15N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
EPM7128STC100-15C
The EPM7128STC100-15C by Altera is a programmable logic device with a maximum clock frequency of 76.9 MHz and a propagation delay of 15 ns. It has 80 I/O lines and can operate with either 3.3V or 5V. This PLD is commonly used in applications requiring configurable I/O operations.
EPM570T100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
5M160ZE64C4N
The 5M160ZE64C4N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 7.9 ns and a maximum clock frequency of 184.1 MHz. The device operates at a nominal supply voltage of 1.8V and has a minimum supply voltage of 1.71V. It is surface mountable, has 54 I/O lines, and uses CMOS technology. This PLD is suitable for applications requiring in-system programmability and output functions such as macrocells.
XCR3128XL-7VQG100C
Xilinx XCR3128XL-7VQG100C is a 128 macrocell EE PLD with 7.5 ns propagation delay and 119 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at temperatures from 0 to 70 °C, and has a package style of flatpack with thin profile.
ATF22V10CQZ-20SU
ATF22V10CQZ-20SU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style for efficient integration into electronic systems.
5962-8867005LA
Defense Logistics Agency
Defense Logistics Agency's 5962-8867005LA is a MIL-STD-883 compliant PLD with 15ns propagation delay, 5.5V max supply voltage, and CMOS technology. It features 11 dedicated inputs, 10 I/O lines, and operates b/w -55 to 125 °C. Ideal for military applications requiring high-speed processing in harsh environments.
XC9572XL-7VQG44I
The Xilinx XC9572XL-7VQG44I is a 72 macrocell FLASH PLD with 34 I/O lines, operating at up to 125 MHz. It features a propagation delay of 7.5 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
EP1K30TC144-2N
EP1K30TC144-2N by Intel is a PLD with 1728 logic cells, 0.4 ns propagation delay, and 102 inputs/outputs. It operates at a max clock frequency of 37.5 MHz and is ideal for applications requiring fast processing speeds in commercial temperature environments.
EPM7256SRI208-10N
EPM7256SRI208-10N by Intel is a 256 macrocell EE PLD with 164 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed data processing and versatile I/O capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF1504AS-10JU44
ATF1504AS-10JU44 by Microchip Technology is a programmable logic device (PLD) with 64 macro cells and 32 inputs/outputs. It has a max clock frequency of 125 MHz and can be used for in-system programming, making it suitable for industrial applications.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ATF1508AS-10AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
Microchip ATF1508AS-10AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 125 MHz clock frequency, has 10 ns propagation delay, and supports in-system programming. Ideal for industrial applications requiring fast processing and versatile I/O capabilities.
ATF1504AS-10AU44
Microchip Technology's ATF1504AS-10AU44 is a 5.5V PLD with 10ns propagation delay, 64 macro cells, and 32 inputs. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates at temperatures ranging from -40 to 85°C.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
Microchip's ATF1508ASV-15AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 3.3V, has a propagation delay of 15ns, and supports in-system programming. Ideal for industrial applications requiring high clock frequencies up to 100MHz.
ATF1504AS-10AU100
Microchip Technology's ATF1504AS-10AU100 is a 64 macro cell EE PLD with 64 inputs/outputs and 40 product terms. It operates at a max clock frequency of 125 MHz, with a propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF1504ASV-15AU44
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
ATF1504ASVL-20AU44
Microchip Technology's ATF1504ASVL-20AU44 is a 3.3V EE PLD with 32 I/O lines and 20ns propagation delay. Ideal for industrial applications, it features a max clock frequency of 83.3MHz and operates b/w -40 to 85°C, making it suitable for various programmable logic tasks.
ATF1508ASL-25AU100
Microchip ATF1508ASL-25AU100 is a 128 macrocell EE PLD with 25ns propagation delay, in-system programmable, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed processing up to 33.3MHz, with a wide operating temperature range from -40°C to 85°C. Package style is flatpack, thin profile, fine pitch for compact designs.
ATF1504AS-10AU44-T
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF1504AS-10JU84
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Microchip Technology's ATF1504AS-10JU84 is a 64 macrocell EE PLD with 32 inputs/outputs, 40 product terms, and 10ns propagation delay. Ideal for industrial applications, it operates b/w -40 to 85°C, supports JTAG boundary scan test, and has a max clock frequency of 125MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved