Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Median Price
$51.300
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$45.600
1k+ parts
$40.800
10k+ parts
$38.400
DigiKey
Verical
$57.000
$54.000
Digiode
$48.250
DigiKey Marketplace
$52.820
Vyrian
Bristol Electronics
Chip Stock
Touchstone Systems
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
PC Components Company LLC
Sogenti Electronics
ACDS - Activité Composants Distribution Service
Native Components
$0.338
$0.324
Northwest PG Solutions
$0.371
$0.327
One Stop Electronics
$43.170
Semicontronic
$42.091
$41.875
Corphita
$45.711
Vigor
$48.760
Corohmni
$50.790
Modulus Dynamics
$61.366
Texas Native Microelectronics
$98.935
$94.978
$92.010
AZTECH Wire
$100.600
$96.620
$94.680
$92.790
Microchip USA
$112.148
Kenton Components
$118.722
$104.475
Alle Elektronik GmbH
MARBEL Systems
Supply Digital
Qasali Group International
$256.440
$235.070
Perfect Parts
A-Z Elektronik GmbH
Programmable Logic Devices (PLD) EPM7128ATC144-6 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM7128ATC144-6 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SPC TECHNOLOGY/ MULTICOMP
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDLL4148
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Bkc Semiconductors
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
XC95288XL-10PQ208I
Xilinx
XC95288XL-10PQ208I by Xilinx is a programmable logic device (PLD) with 288 macro cells and 168 inputs/outputs. It operates at a max clock frequency of 100 MHz and can be used for in-system programming, making it suitable for industrial applications.
5M1270ZF256C4N
Altera
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
EPM3032ATC44-4
Intel
EPM3032ATC44-4 by Intel is a 32 macrocell EE PLD with 4.5 ns propagation delay and 227.3 MHz max clock frequency. Ideal for applications requiring in-system programmability, it operates at a max temp of 70°C with a supply voltage range of 3-3.6 V, featuring JTAG boundary scan test capability.
EPF6024AQC240-2N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
GAL16V8D-25LPI
Lattice Semiconductor
GAL16V8D-25LPI by Lattice Semiconductor is a 5.5V CMOS PLD with 25ns propagation delay, featuring 18 inputs and 8 I/O lines. Ideal for industrial applications, it offers a max clock frequency of 37MHz and operates b/w -40 to 85°C.
M4A5-64/32-12VI48
Vantis
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
5M570ZT100I5
The Intel 5M570ZT100I5 is a FLASH PLD with 74 I/O lines, offering a max clock frequency of 118.3 MHz and propagation delay of 17.7 ns. Ideal for industrial applications requiring high-speed data processing in compact spaces due to its thin profile, fine pitch package style, and low supply voltage range from 1.71V to 1.89V.
PEEL18CV8P-15L
Diodes Inc. PEEL18CV8P-15L is a PLD with 15ns propagation delay, 5.25V max supply voltage, and CMOS technology. Ideal for PAL-type applications, it offers 74 product terms, 41.6MHz clock frequency, and operates b/w 0-70°C.
EPM570T100I5N
The EPM570T100I5N by Altera is a programmable logic device with 440 macro cells and a propagation delay of 8.7 ns. It uses CMOS technology and has a maximum supply voltage of 2.625V. The package is a square TFQFP with 100 terminals and a pitch of 0.5 mm. This device is in-system programmable and its output function is macrocell. It is suitable for applications requiring flash PLD technology and can operate at 3.3V.
5M1270ZT144I5
Intel's 5M1270ZT144I5 is a FLASH PLD with 114 I/O lines, 201.1 MHz clock frequency, and 10 ns propagation delay. Ideal for industrial applications requiring high-speed data processing in compact spaces due to its low profile, fine pitch package style and macrocell output function.
5M160ZT100I5N
5M160ZT100I5N by Intel is a PLD with 128 macro cells, 14 ns propagation delay, and 118.3 MHz max clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
XC2C64A-5VQ44C
XC2C64A-5VQ44C by Xilinx is a 64 macrocell FLASH PLD with 33 I/O lines, operating at up to 333 MHz. It features a propagation delay of 5 ns and can be in-system programmable. Ideal for applications requiring high-speed processing and versatile I/O capabilities in commercial-grade environments.
5M40ZM64C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 64; Package Code: TFBGA; Package Shape: SQUARE;
ATF22V10C-15JU
Microchip Technology
ATF22V10C-15JU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, suitable for industrial applications. Featuring 22 inputs, 10 dedicated inputs, and 10 I/O lines, it offers a clock frequency of up to 55.5MHz in a square chip carrier package style.
EPM1270T144C5N
EPM1270T144C5N by Intel is a Flash PLD with 980 macro cells, 116 inputs/outputs, and a propagation delay of 10 ns. It is ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its low profile package style and CMOS technology.
XC2C64A-5VQG100C
XC2C64A-5VQG100C by Xilinx is a 64 macrocell FLASH PLD with 5 ns propagation delay, operating at up to 333 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing, it features a max supply voltage of 1.9 V and operates within a temperature range of 0-70°C.
5M1270ZF324C5N
The Intel 5M1270ZF324C5N is a programmable logic device (PLD) with 980 macro cells and a max clock frequency of 201.1 MHz. It is used for applications requiring in-system programmability and features a package style of grid array, low profile.
XC9572XL-5TQG100C
The Xilinx XC9572XL-5TQG100C is a 72 macrocell CMOS PLD with 5 ns propagation delay. It operates at 3.3V and supports in-system programmability, making it ideal for applications requiring high clock frequencies up to 178.6 MHz such as digital signal processing and telecommunications systems.
5M160ZE64C5N
Intel's 5M160ZE64C5N is a FLASH PLD with 128 macro cells, 54 I/O lines, and 118.3 MHz clock frequency. It operates at a max supply voltage of 1.89V and has a propagation delay of 14ns. Ideal for applications requiring programmable logic devices with high-speed performance and in-system programmability.
SLG46855VTR
Dialog Semiconductor
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 14; Package Code: VQCCN; Package Shape: RECTANGULAR; Width: 1.6 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
EPM7128AETC100-5N
Intel's EPM7128AETC100-5N is a 128 macrocell EE PLD with 5ns propagation delay and 192.3MHz clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at max temp of 70°C, and has a package style of flatpack with low profile and fine pitch.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128SQI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
EPM7064AETI100-7N
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM7256AETI144-7N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
EPM7128STI100-10N by Intel is a 128 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in industrial applications, featuring in-system programmability, JTAG boundary scan test, and 84 I/O lines for versatile connectivity.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved