Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
Median Price
$65.440
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$54.830
1k+ parts
$47.020
10k+ parts
$44.670
Verical
Digiode
$62.168
-
DF Sales Co.
$112.000
Nova Conductors
$116.010
Vyrian
Chip Stock
Touchstone Systems
North Shore Components
SPM Sales
Andel Nordic
$8.037
$7.715
Modulus Dynamics
$10.424
Advanced Electronics
$35.217
$32.047
$28.878
MARBEL Systems
$35.305
Kenton Components
$48.696
$42.852
Ampacity Inc.
$55.620
One Stop Electronics
Semicontronic
$54.230
$53.951
Corphita
$58.896
Texas Native Microelectronics
$96.744
$92.874
$89.972
Corohmni
Continental Prestige Electronics
$113.690
Netroflash
$110.210
$107.889
Microchip USA
$152.845
A-Z Elektronik GmbH
Authorized Procurement Solutions
Qasali Group International
$250.760
$229.864
Alle Elektronik GmbH
Glotronic Ltd.
Argo Parts USA
Supply Digital
Kepictronics
Vigor
Perfect Parts
Futuretech Components
GreenTree Electronics
Programmable Logic Devices (PLD) EPM7192SQC160-10N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM7192SQC160-10N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 01/Dec/2016 EOL 21/Nov/2016
PCN Design/Specification - Mult Series Software Chgs 26/Mar/2020
PCN Packaging - All Dev Pkg Chg 1/Aug/2018 Mult Dev Dessicant Chg 19/Jul/2019
PCN Other - Software Disc 06/Nov/2020
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Silicon Standard
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Rugao Dachang Electronic
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ATF1508AS-10AU100
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
5M80ZE64C4N
Intel
Intel's 5M80ZE64C4N is a FLASH PLD with 64 macro cells, 7.9 ns propagation delay, and 184.1 MHz max clock frequency. Ideal for applications requiring in-system programmability, such as high-speed digital designs or embedded systems development.
EPF10K20RI208-4N
Altera
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: HFQFP; Package Shape: SQUARE;
XC95288XL-10PQ208I
Xilinx
XC95288XL-10PQ208I by Xilinx is a programmable logic device (PLD) with 288 macro cells and 168 inputs/outputs. It operates at a max clock frequency of 100 MHz and can be used for in-system programming, making it suitable for industrial applications.
XC2C32A-6QFG32C
The Xilinx XC2C32A-6QFG32C is a 32 macrocell FLASH PLD with 6 ns propagation delay and 300 MHz max clock frequency. Ideal for applications requiring in-system programmability, it operates at temperatures ranging from 0 to 70°C and supports JTAG boundary scan testing.
5M1270ZF256C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
LC4384V-75TN176C
Lattice Semiconductor
LC4384V-75TN176C by Lattice Semiconductor is a 384 macrocell EE PLD with 132 inputs and 128 I/O lines. Featuring a propagation delay of 7.5 ns, it operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact square package.
EPM240T100A5N
EPM240T100A5N by Intel is a PLD with 192 macro cells, 80 inputs/outputs, and 7.5ns propagation delay. It uses CMOS technology, has a max supply voltage of 2.625V, and is in-system programmable. Ideal for automotive applications due to its high operating temperature range of -40 to 125°C and JTAG boundary scan test capability.
EPM7128SQC100-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
XC95288XL-10TQG144I
XC95288XL-10TQG144I by Xilinx is a PLD with 288 macro cells, 117 inputs/outputs, and 100 MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test support, and operates b/w -40 to 85°C.
5M240ZT100C4N
Intel's 5M240ZT100C4N is a FLASH PLD with 192 macro cells, 79 I/O lines, and 184.1 MHz clock frequency. Ideal for applications requiring in-system programmability and fast propagation delay of 7.9 ns in a compact square package with GULL WING terminals.
PEEL18CV8P-15L
Anachip
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
LC4128ZE-7TN100C
LC4128ZE-7TN100C by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay, 111 MHz max clock frequency, and 64 I/O lines. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
PEEL18CV8P-15
Ami Semiconductor
ATF22LV10C-10JU
Microchip Technology
ATF22LV10C-10JU by Microchip Technology is a 3.3/5V CMOS PLD with 10ns propagation delay, 132 product terms, and 71.4MHz max clock frequency. Ideal for PAL-type applications requiring FLASH PLDs in a square chip carrier package with 10 dedicated inputs and outputs.
ATF16V8CZ-15XU
ATF16V8CZ-15XU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 64 product terms and 8 I/O lines, it operates b/w -40 to 85°C with a clock frequency of up to 45MHz. This flash PLD in a small outline package is surface mountable and has industrial-grade temperature grading.
XC2C32A-6QFG32I
Xilinx XC2C32A-6QFG32I is a 32 macrocell FLASH PLD with 6 ns propagation delay and 300 MHz max clock frequency. Ideal for industrial applications, it operates at -40 to 85 °C, has 21 I/O lines, and supports JTAG boundary scan testing.
5M240ZM100C5N
Intel's 5M240ZM100C5N is a PLD with 192 macro cells, 79 I/O lines, and 118.3 MHz clock frequency. It uses CMOS technology, has in-system programmability, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high input/output capabilities.
EPM7128SLC84-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
XC2C256-7VQ100I
XC2C256-7VQ100I by Xilinx is a 256 macrocell PLA-type FLASH PLD with 80 I/O lines, operating at max 108 MHz clock frequency. It features 7.5 ns propagation delay and can be in-system programmed. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
EPM7128AETC100-5N
Intel's EPM7128AETC100-5N is a 128 macrocell EE PLD with 5ns propagation delay and 192.3MHz clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at max temp of 70°C, and has a package style of flatpack with low profile and fine pitch.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128SQI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
EPM7064AETI100-7N
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM7256AETI144-7N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
EPM7128STI100-10N by Intel is a 128 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in industrial applications, featuring in-system programmability, JTAG boundary scan test, and 84 I/O lines for versatile connectivity.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved