Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
ACDS - Activité Composants Distribution Service
One Stop Electronics
$5.000
Semicontronic
$19.000
$18.525
$18.430
MARBEL Systems
$29.081
Kenton Components
$40.111
$35.298
Native Components
$92.740
$89.030
Northwest PG Solutions
$102.014
Modulus Dynamics
$112.221
Microchip USA
$158.277
Texas Native Microelectronics
$169.319
$149.001
Qasali Group International
$457.161
$425.160
Glotronic Ltd.
Supply Digital
Corphita
Vigor
Perfect Parts
Corohmni
Cyclops Electronics Ltd (Excess)
Programmable Logic Devices (PLD) EPF10K40RC240-4N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Dedicated Inputs:
No. of Logic Cells:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EPF10K40RC240-4N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Eic Semiconductor
Secos
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M4A5-32/32-10VNI48
Lattice Semiconductor
M4A5-32/32-10VNI48 by Lattice Semiconductor is a 32 macrocell EE PLD with 34 inputs and 32 outputs. It operates at a max clock frequency of 62.5 MHz, making it suitable for industrial applications requiring fast processing speeds. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
XC2C384-10FTG256I
Xilinx
Xilinx XC2C384-10FTG256I is a 384 macrocell FLASH PLD with 212 I/O lines. It operates at max clock freq of 83MHz, has propagation delay of 10ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring in-system programmable logic devices with low profile grid array package style.
ATF22V10CQZ-20SI
Microchip Technology
ATF22V10CQZ-20SI by Microchip Technology is a 24-terminal PLD with 20ns propagation delay and 5.5V max supply voltage. It features CMOS technology, flash PLD type, and macrocell output function. Ideal for industrial applications requiring high clock frequency up to 38.5MHz in compact small outline package style.
EPF10K10ATI144-3N
Altera
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
LC4128ZC-75TN100C
LC4128ZC-75TN100C by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay, 74 inputs, and 64 I/O lines. It features in-system programmability, JTAG boundary scan test support, and operates at a max clock frequency of 111 MHz. Ideal for applications requiring fast processing speeds and high I/O capabilities in compact designs.
ATF22V10CQZ-20PU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
5M1270ZF256C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
XC95144XL-10TQG100I
The Xilinx XC95144XL-10TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines. It operates at a max clock frequency of 138.88 MHz, has propagation delay of 10 ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
EPM240T100I3
The EPM240T100I3 by Altera is a programmable logic device with 192 macro cells. It has a propagation delay of 4.7 ns and uses CMOS technology. This surface mount device comes in a QFP package with 100 terminals and is in-system programmable. Its features include JTAG boundary scan test and a peak reflow temperature of 220°C.
LC4064V-25TN44C
LC4064V-25TN44C by Lattice Semiconductor is a 64 macrocell EE PLD with 2.5 ns propagation delay, operating at up to 250 MHz. Ideal for applications requiring fast processing speeds and high I/O capabilities in programmable logic devices. With in-system programmability and JTAG boundary scan test support, it offers flexibility for various design requirements.
5M80ZT100C5N
Intel
Intel's 5M80ZT100C5N is a PLD with 64 macro cells, 118.3 MHz clock frequency, and 14 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
EPM240GF100I5N
FLASH PLD; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE; Peak Reflow Temperature (C): 260;
EPM7064AETI100-7N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EP1K50TC144-2N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XCR3064XL-10VQG100C
Xilinx XCR3064XL-10VQG100C is a 64 macrocell EE PLD with 68 I/O lines, operating at max 95 MHz. It features in-system programmability, JTAG boundary scan test, and propagation delay of 10 ns. Ideal for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
5M570ZT144C4
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
5M1270ZT144C4
Intel's 5M1270ZT144C4 is a FLASH PLD with 114 I/O lines, operating at up to 247.5 MHz clock frequency. Featuring GULL WING terminals and low profile FLATPACK package, it offers fast 8.1 ns propagation delay for applications requiring high-speed data processing in compact designs.
ATF1504ASVL-20JU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
LC4256ZE-5TN144C
LC4256ZE-5TN144C by Lattice Semiconductor is a 256 macrocell EE PLD with 5.8 ns propagation delay, 1.9 V max supply voltage, and 149 MHz clock frequency. Ideal for applications requiring in-system programmability, it features 14 dedicated inputs and 96 I/O lines in a compact square package with gull wing terminals.
ATF1504AS-10AU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPF10K10TI144-4N
The EPF10K10TI144-4N by Altera is a programmable logic device with 576 logic cells, propagation delay of 0.6 ns, and CMOS technology. It has 102 inputs and outputs, a maximum supply voltage of 5.25 V, and is surface mountable. This PLD is suitable for industrial applications.
EPF10K10TI144-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 102 inputs. It is used in industrial applications requiring fast processing speeds and high I/O capabilities. The device features a low profile flatpack package with matte tin terminals for reliable performance in harsh environments.
EPF10K50RI240-4N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
EPF10K50RI240-4N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 189 inputs. Ideal for industrial applications, it operates at -40 to 85 °C with a clock frequency of 62.89 MHz. The package style includes flatpack and heat sink/slug options in a square shape with gull wing terminals.
EPF10K10QC208-4N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EPF10K10QC208-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 134 inputs. Ideal for applications requiring high-speed processing and complex logic functions in commercial-grade environments. Features include 5.25 V max supply voltage, 67.11 MHz clock frequency, and flatpack fine pitch package style.
EPF10K50VRI240-4N
EPF10K100ARI240-3N
EPF10K10AQC208-3N
Intel's EPF10K10AQC208-3N is a PLD with 576 logic cells, 0.8 ns propagation delay, and 134 inputs/outputs. It operates at 80 MHz clock frequency, suitable for applications requiring high-speed processing in commercial environments. The device features a flatpack package style with gull wing terminals and matte tin finish.
EPF10K20TI144-4N
EPF10K50RC240-3N
The EPF10K50RC240-3N by Altera is a programmable logic device with 2880 logic cells. It has a maximum supply voltage of 5.25V and operates at a maximum clock frequency of 66.67MHz. Its application includes use in loadable PLDs and registered output functions.
EPF10K50ETI144-2
EPF10K50ETI144-2 by Intel is a programmable logic device (PLD) with 2880 logic cells and a propagation delay of 0.6 ns. It is used in applications requiring high-speed processing, such as industrial automation and telecommunications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved