Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: HFQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Sternenhof Electronics
Q Components
Bristol Electronics
Zilex Electronics Inc.
Inventory MP
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
MRC Electronics
Sogenti Electronics
North Shore Components
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
DF Sales Co.
Manoshevitz Elec. Sales
Sea View Technologies
Electronics Depot
A&K Electronics
Rotakorn
ComSIT Distribution GmbH
ComSIT USA
Speed Components Ltd
Touchstone Systems
Semtec, LLC
Resion
Corel Iberica Componentes, S.L.
Native Components
$0.670
Northwest PG Solutions
$0.737
Andel Nordic
$1.480
$1.033
Semicontronic
$8.000
$7.800
$7.760
One Stop Electronics
$12.000
MARBEL Systems
$23.734
Kenton Components
$32.736
$28.808
Corohmni
$65.919
Component Stockers USA
$99.990
Modulus Dynamics
$120.979
Advanced Electronics
$129.839
$118.153
$106.468
Texas Native Microelectronics
$153.764
$135.312
Microchip USA
$224.637
Qasali Group International
$415.163
$386.101
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Supply Digital
Corphita
Perfect Parts
Vigor
Cyclops Electronics Ltd (Excess)
Programmable Logic Devices (PLD) EPF10K20RC208-4 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Dedicated Inputs:
No. of Logic Cells:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EPF10K20RC208-4 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Excel (Suzhou) Semiconductor
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M4A5-64/32-10VNI48
Lattice Semiconductor
M4A5-64/32-10VNI48 by Lattice Semiconductor is a PLD with 64 macro cells, 34 inputs, and 32 outputs. It operates at a max clock frequency of 62.5 MHz and has a propagation delay of 10 ns. This programmable IC is ideal for applications requiring fast processing speeds in industrial environments.
EPF6024ATC144-2N
Altera
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7064AETI100-7N
Intel
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EPM3032ATC44-4
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
5M570ZT100C4
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM3064ATC44-10N
EPM3064ATC44-10N by Intel is a 64 macrocell EE PLD with 34 I/O lines, operating at up to 100 MHz. It features a propagation delay of 10 ns and can handle a max supply voltage of 3.6 V. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in commercial-grade environments.
ATF1504ASV-15AC100
Atmel
Atmel ATF1504ASV-15AC100 is a 64 macrocell EE PLD with 15ns propagation delay, operating at max 100MHz clock frequency. Ideal for applications requiring fast processing speeds and high I/O capabilities in commercial temperature environments. Features include in-system programmability, JTAG boundary scan test, and thin profile flatpack package style.
ATF22V10C-10PC
Atmel's ATF22V10C-10PC is a 5.25V CMOS PLD with 10ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, this FLASH PLD offers a clock frequency of up to 90MHz in commercial temperature grades.
EPF10K100ARI240-3N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
5M160ZT100I5N
5M160ZT100I5N by Intel is a PLD with 128 macro cells, 14 ns propagation delay, and 118.3 MHz max clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
XC2C64A-7PCG44C
Xilinx
XC2C64A-7PCG44C by Xilinx is a 64-macrocell FLASH PLD with 7.5 ns propagation delay, operating at up to 200 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing, it features 33 I/O lines and operates within a temperature range of 0-70°C.
SLG46880VTR
Renesas Electronics
SLG46880VTR by Renesas Electronics is a 32-terminal PLD with 12 macro cells and 18 inputs. Operating b/w -40 to 85 °C, it has a max supply voltage of 5.5 V and min of 2.3 V. Ideal for applications requiring programmable ICs in compact spaces like consumer electronics or industrial control systems.
TIBPAL16L8-25CN
TIBPAL16L8-25CN by Texas Instruments is a TTL technology-based PAL-type PLD with 16 inputs, 64 product terms, and 8 outputs. It operates at a max clock frequency of 30 MHz with a propagation delay of 25 ns. Ideal for applications requiring combinatorial output functions in commercial extended temperature environments.
EPM3128ATC144-10N
EPM3128ATC144-10N by Intel is a 128 macrocell EE PLD with 96 I/O lines, operating at up to 98 MHz. It features a propagation delay of 10 ns and can be in-system programmable. This PLD is ideal for applications requiring fast processing speeds and versatile input/output configurations.
XC95144XL-7TQ144I
XC95144XL-7TQ144I by Xilinx is a programmable logic device with 144 macro cells and 117 inputs/outputs. It operates at a max clock frequency of 138.88 MHz and is commonly used in industrial applications for its in-system programmability and low profile package style.
ATF22V10C-7SX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
XCR3128XL-10VQG100C
Xilinx XCR3128XL-10VQG100C is a 128 macrocell EE PLD with 84 I/O lines, operating at max 95 MHz clock frequency. It has a propagation delay of 10 ns and supports JTAG boundary scan test. Ideal for applications requiring fast processing speeds and high I/O capabilities in commercial temperature environments.
ATF1504ASL-25AU100
Microchip Technology's ATF1504ASL-25AU100 is a 64 macrocell EE PLD with 25ns propagation delay and 60MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test, and operates at temperatures ranging from -40 to 85°C.
EP20K100EQC240-2N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
5M240ZT100C5N
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPF10K10TI144-4N
The EPF10K10TI144-4N by Altera is a programmable logic device with 576 logic cells, propagation delay of 0.6 ns, and CMOS technology. It has 102 inputs and outputs, a maximum supply voltage of 5.25 V, and is surface mountable. This PLD is suitable for industrial applications.
EPF10K10TI144-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 102 inputs. It is used in industrial applications requiring fast processing speeds and high I/O capabilities. The device features a low profile flatpack package with matte tin terminals for reliable performance in harsh environments.
EPF10K50RI240-4N
EPF10K50RI240-4N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 189 inputs. Ideal for industrial applications, it operates at -40 to 85 °C with a clock frequency of 62.89 MHz. The package style includes flatpack and heat sink/slug options in a square shape with gull wing terminals.
EPF10K10QC208-4N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EPF10K10QC208-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 134 inputs. Ideal for applications requiring high-speed processing and complex logic functions in commercial-grade environments. Features include 5.25 V max supply voltage, 67.11 MHz clock frequency, and flatpack fine pitch package style.
EPF10K10ATI144-3N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPF10K50VRI240-4N
EPF10K10AQC208-3N
Intel's EPF10K10AQC208-3N is a PLD with 576 logic cells, 0.8 ns propagation delay, and 134 inputs/outputs. It operates at 80 MHz clock frequency, suitable for applications requiring high-speed processing in commercial environments. The device features a flatpack package style with gull wing terminals and matte tin finish.
EPF10K20TI144-4N
EPF10K50RC240-3N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
The EPF10K50RC240-3N by Altera is a programmable logic device with 2880 logic cells. It has a maximum supply voltage of 5.25V and operates at a maximum clock frequency of 66.67MHz. Its application includes use in loadable PLDs and registered output functions.
EPF10K50ETI144-2
EPF10K50ETI144-2 by Intel is a programmable logic device (PLD) with 2880 logic cells and a propagation delay of 0.6 ns. It is used in applications requiring high-speed processing, such as industrial automation and telecommunications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved