Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$1.041
Northwest PG Solutions
$1.146
One Stop Electronics
$9.000
Semicontronic
$8.775
$8.730
Texas Native Microelectronics
$141.791
$136.119
$131.866
$124.776
Qasali Group International
$382.836
Supply Digital
MARBEL Systems
Kenton Components
$158.239
Corphita
Corohmni
Programmable Logic Devices (PLD) EP910ALC44-15 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
JESD-30 Code:
Qualified:
EP910ALC44-15 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Diotec Semiconductor Ag
BSS138PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1554216004
WIRE AND CABLE;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATF1504ASVL-20JU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EPF10K50ETI144-2
Intel
EPF10K50ETI144-2 by Intel is a programmable logic device (PLD) with 2880 logic cells and a propagation delay of 0.6 ns. It is used in applications requiring high-speed processing, such as industrial automation and telecommunications.
M4A5-96/48-10VNC
Lattice Semiconductor
M4A5-96/48-10VNC by Lattice Semiconductor is a 96 macrocell EE PLD with 48 I/O lines, operating at up to 62.5 MHz. It features a propagation delay of 10 ns and can be in-system programmable for various applications requiring PAL-type architecture and low profile flatpack package style.
ATF1504ASL-25AU100
Microchip Technology's ATF1504ASL-25AU100 is a 64 macrocell EE PLD with 25ns propagation delay and 60MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test, and operates at temperatures ranging from -40 to 85°C.
ATF22V10C-10JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
EPM7256SQC208-15N
Altera
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
SLG46120V
Renesas Electronics
SLG46120V by Renesas Electronics is a 12-macrocell OT PLD with 10 inputs and 9 I/O lines. Operating at 1.71-1.89 V, it's ideal for applications requiring low-power consumption in a compact square chip carrier package. With a PLA-type architecture, this device offers versatile programmable logic functions for various electronic designs.
XCR3128XL-10TQG144C
Xilinx
Xilinx XCR3128XL-10TQG144C is a 128 macrocell EE PLD with 108 I/O lines, operating at max clock freq of 95 MHz. In-system programmable, it has propagation delay of 10 ns and operates within -40 to +85 °C range. Ideal for applications requiring high-speed logic processing in commercial environments.
LC4256ZC-75TN100E
LC4256ZC-75TN100E by Lattice Semiconductor is a 256 macrocell EE PLD with 7.5 ns propagation delay, 74 inputs, and 64 I/O lines. It features in-system programmability, JTAG boundary scan test support, and operates at a max clock frequency of 111 MHz. Ideal for applications requiring fast processing speeds and high I/O capabilities in compact designs.
EPM570ZM100C7N
EPM570ZM100C7N by Intel is a FLASH PLD with 440 macro cells, 76 I/O lines, and 15.1 ns propagation delay. It is ideal for applications requiring programmable logic devices with in-system programmability and JTAG boundary scan testing capabilities.
5M40ZM64C5N
Intel's 5M40ZM64C5N is a FLASH PLD with 30 I/O lines, 118.3 MHz clock frequency, and 14 ns propagation delay. Ideal for applications requiring programmable logic devices with high-speed processing capabilities in compact form factors.
ATF16V8B-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
5M1270ZF256C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
EPM570GT144C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM570ZM100C6N
The Intel EPM570ZM100C6N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 9.5 ns propagation delay. It uses CMOS technology and has a max supply voltage of 1.89 V. Ideal for applications requiring programmable logic devices with fast response times and high input/output capabilities in compact form factors.
EPM570GT144C5N
Intel's EPM570GT144C5N is a FLASH PLD with 440 macro cells, 116 inputs/outputs, and 8.7 ns propagation delay. Ideal for applications requiring in-system programmability, it operates at temperatures from 0 to 85°C with a supply voltage range of 1.71-1.89 V.
ATF22V10CZ-15PC
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
EPM3032ATC44-4N
Intel's EPM3032ATC44-4N is a 32 macrocell EE PLD with 4.5 ns propagation delay, operating at up to 227.3 MHz clock frequency. Ideal for applications requiring in-system programmability and featuring 34 I/O lines, this CMOS technology PLD has a max supply voltage of 3.6 V and operates within -40 to +85°C temperature range.
5M570ZM100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: TFBGA; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EP910DC-40
UV PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
EP910LC-35
OT PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP910LI-45
OT PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP910DC-35
EP910JC-35
UV PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP910PC-30
OT PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
EP910LC-40
EP910PC-35
EP910JC-40
EP910JI-45
UV PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP910PC-40
EP910DC-30
EP910PI-45
OT PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
EP910LC-30
EP910JC-30
EP910DI-45
UV PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
EP910ALC44-12
EP910ALC-12
Programmable Logic Devices; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP910ALC-10
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved