Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
VX-51-1C23
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; DC Maximum Rating R Load (Contact): 5A@30VDC; Body Height: 15.9 mm;
2.4
SHORT HINGE LEVER
10.3 inch
15.9 mm
27.8 mm
5A@250VAC
5 A
5A@30VDC
250 V
30 V
500000 Cycle(s)
VX
PANEL MOUNT
.49 N
80 Cel
-25 Cel
1.6 mm
IP40
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
QUICK CONNECT
VX-52-1A3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; AC Maximum Rating R Load (Contact): 5A@250VAC; Manufacturer Series: VX;
5.6
HINGE LEVER
.29 N
4 mm
SOLDER
VX-52-1C23
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum AC Contact Current: 5 A; Maximum DC Contact Voltage: 30 V;
VX-53-1A3
Omron's VX-53-1A3 snap action switch has a 500000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max operating temperature of 80°C, it is ideal for panel mounting applications requiring a 5A@250VAC AC max rating R load contact.
12.2
LONG HINGE LEVER
.19 N
9 mm
VX-53-1C23
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Voltage: 30 V; Actuator Travel (mm): 12.2;
VX-54-1A3
Omron's VX-54-1A3 is a SPDT snap action/limit switch with 500000 cycles electrical life. Featuring IP40 sealing, it operates at temperatures from -25 to 80°C. With a max AC contact current of 5A@250VAC, it is ideal for panel mounting applications requiring momentary switch action.
SIMULATED ROLLER LEVER
VX-54-1C23
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Pre Travel: 1.6 mm; Body Width: 10.3 inch;
VX-55-1A3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; DC Maximum Rating R Load (Contact): 5A@30VDC; Maximum AC Contact Current: 5 A;
SHORT HINGE ROLLER LEVER
.59 N
D2F-01FL-A1
Omron's D2F-01FL-A1 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE LEVER actuator type, it has 0.55mm travel and 0.74N max operating force. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -25°C to 65°C.
.55
6.5 inch
5.8 mm
12.8 mm
A@VAC
.1 A
.1A@30VDC
30000 Cycle(s)
THROUGH HOLE-RIGHT ANGLE
.74 N
65 Cel
D2F-01FL3-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Width: 6.5 inch; DC Maximum Rating R Load (Contact): .1A@30VDC;
.5
D2F-01L2-A1
Omron's D2F-01L2-A1 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for applications requiring momentary switch action, it offers 1.47N max operating force and supports 0.1A@30VDC DC contact current.
HINGE ROLLER LEVER
1.47 N
D2F-01L3-A1
Omron's D2F-01L3-A1 snap action switch offers 30000 cycles electrical life, SPDT switch function, and IP40 sealing. Ideal for applications requiring a momentary switch with simulated roller lever actuator, operating b/w -25°C to 65°C.
D2F-F-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Sealing: IP40; Maximum Pre Travel: .5 mm;
.75
PIN PLUNGER
1A@125VAC
1 A
.5 A
.5A@30VDC
125 V
.5 mm
D2F-FL2-A1
Omron's D2F-FL2-A1 snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 1A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65°C.
D2F-L2-A1
Omron D2F-L2-A1 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for applications requiring momentary switch action with 3A@125VAC AC max rating and 2A@30VDC DC max rating.
3A@125VAC
3 A
2 A
2A@30VDC
D2RW-01L2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE ROLLER LEVER; Maximum Pre Travel: 4 mm; Maximum DC Contact Voltage: 100 V;
5
35.9 mm
.25 A
.25A@100VDC
100 V
1000000 Cycle(s)
D2RW
.75 N
60 Cel
-10 Cel
IP67
SPST
WIRE
D2SW-01L1MS
The Omron D2SW-01L1MS snap action switch has a 200000 cycle electrical life, IP67 sealing, and SPDT switch function. With a hinge lever actuator type, it is ideal for panel mounting applications requiring momentary switch action. Operating temperature range from -40 to 85°C with max contact current of 0.1A at 125VAC or 30VDC.
1
6.4 inch
16.9 mm
21.2 mm
.1A@125VAC
200000 Cycle(s)
D2SW
85 Cel
-40 Cel
D2SW-01L3HS
Omron D2SW-01L3HS is a SPDT snap action/limit switch with IP67 sealing. It has an electrical life of 200,000 cycles and operates b/w -40°C to 85°C. Ideal for applications requiring momentary switch action, it features a simulated roller lever actuator and can handle 0.1A@125VAC or 0.1A@30VDC loads.
10.1 mm
19.8 mm
THROUGH HOLE-STRAIGHT
.58 N
SS-01GL13PB
Omron SS-01GL13PB is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it has a simulated roller lever actuator and operates b/w -25°C to 85°C. Ideal for applications requiring momentary switch action, with max AC contact voltage of 125V and DC contact current of 0.1A.
SIMULATTED ROLLER LEVER
11 mm
SS-P
.5 N
SS-01GLPB
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum AC Contact Current: .1 A; Maximum DC Contact Current: .1 A;
SS-01GLPD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Length/Diameter: 19.8 mm; Body Height: 11 mm;
SS-01GLPT
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Termination Type: QUICK CONNECT; Maximum DC Contact Voltage: 30 V;
SS-01GPB
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Sealing: IP40; DC Maximum Rating R Load (Contact): .1A@30VDC;
1.5 N
.6 mm
SS-01GPD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Pre Travel: .6 mm; Maximum Operating Force: 1.5 N;
SS-01GP
Omron SS-01GP is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it has a max operating force of 1.5N and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring momentary switch action with PIN PLUNGER actuator type.
100 mohm
1500VAC
100000000 ohm
.331 inch
.157 inch
SS-3GL13PB
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATTED ROLLER LEVER; Actuator Travel (mm): 1; Maximum AC Contact Voltage: 125 V;
3A@30VDC
70000 Cycle(s)
SS-3GL13PD
Omron SS-3GL13PD is a SPDT snap action/limit switch with 70000 cycles electrical life. Featuring IP40 sealing, it has a max operating force of 0.5N and operates at temperatures ranging from -25°C to 85°C. Ideal for applications requiring momentary switch action and a max AC contact current of 3A@125VAC.
SS-3GLPB
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; DC Maximum Rating R Load (Contact): 3A@30VDC; Maximum AC Contact Voltage: 125 V;
VX-56-1A3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum Pre Travel: 4 mm; Body Width: 10.3 inch;
D2SW-P01B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 19.8 mm; Actuator Travel (mm): 1;
D2SW-P
1.8 N
70 Cel
-20 Cel
D2SW-P01D
The Omron D2SW-P01D snap action switch has an electrical life of 200K cycles, IP67 sealing, and SPDT switch function. With a body width of 6.4in and pin plunger actuator type, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -20°C to 70°C.
D2SW-P01L1B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Actuator Travel (mm): .8; Body Length/Diameter: 19.8 mm;
.8
.6 N
D2SW-P01L1D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum AC Contact Voltage: 125 V; Electrical Life: 200000 Cycle(s);
D2SW-P01L1M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum AC Contact Current: .1 A; Switch Action: MOMENTARY;
D2SW-P01L1T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Length/Diameter: 19.8 mm; Maximum AC Contact Current: .1 A;
D2SW-P01L2B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Actuator Travel (mm): .8; Maximum DC Contact Voltage: 30 V;
D2SW-P01L2D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum Operating Force: .6 N; Actuator Travel (mm): .8;
D2SW-P01L2H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Body Height: 11 mm; AC Maximum Rating R Load (Contact): .1A@125VAC;
D2SW-P01L3B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Termination Type: SOLDER; Maximum DC Contact Current: .1 A;
D2SW-P01L3D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; AC Maximum Rating R Load (Contact): .1A@125VAC; Electrical Life: 200000 Cycle(s);
D2SW-P01L3H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Height: 11 mm; Manufacturer Series: D2SW-P;
D2SW-P01L3M
The Omron D2SW-P01L3M is a snap action/limit switch with SPDT function. It has an electrical life of 200,000 cycles and sealing rating of IP67, making it suitable for harsh environments. With a max operating temperature of 70°C and actuator travel of 0.8mm, it is commonly used in panel mount applications requiring momentary switch action.
D2SW-P01M
Omron D2SW-P01M is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP67 sealing, it has a max operating force of 1.8N and operates b/w -20 to 70°C. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
D2SW-P01T
The Omron D2SW-P01T snap action switch has an electrical life of 200,000 cycles and sealing rating of IP67. With SPDT switch function and PIN PLUNGER actuator type, it is ideal for applications requiring momentary switch action in harsh environments. It operates b/w -20°C to 70°C with max AC contact voltage of 125VAC.
D2SW-P2B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 19.8 mm; Electrical Life: 50000 Cycle(s);
2A@250VAC
50000 Cycle(s)
D2SW-P2D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 70 Cel; Maximum AC Contact Voltage: 250 V;
D2SW-P2H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Voltage: 250 V; Sealing: IP67;
D2SW-P2L1B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Sealing: IP67; Maximum DC Contact Current: 2 A;
© 2023 All rights reserved
