Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
X-10GM-B
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum DC Contact Voltage: 125 V; Sealing: IP00;
5.5
HINGE LEVER
17.45 inch
24.2 mm
49.2 mm
10 A
10A@125VDC
125 V
100000 Cycle(s)
PANEL MOUNT
2.16 N
80 Cel
-25 Cel
6.5 mm
IP00
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SCREW
X-10GM2-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Actuator Travel (mm): 4; Electrical Life: 100000 Cycle(s);
4
HINGE ROLLER LEVER
3.14 N
6 mm
X-10GM22-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum Operating Force: 6.86 N; Maximum Operating Temperature: 80 Cel;
2
SHORT HINGE ROLLER LEVER
6.86 N
4.7 mm
X-10GM22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Body Width: 17.45 inch; Sealing: IP00;
SOLDER
X-10GM2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Body Height: 24.2 mm; Maximum DC Contact Current: 10 A;
X-10GM
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Electrical Life: 100000 Cycle(s); DC Maximum Rating R Load (Contact): 10A@125VDC;
X-10GQ21-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSSROLLER PLUNGER; Body Length/Diameter: 49.2 mm; Maximum Pre Travel: .9 mm;
4.5
CROSSROLLER PLUNGER
5 N
.9 mm
X-10GQ21
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSSROLLER PLUNGER; Maximum Operating Temperature: 80 Cel; Termination Type: SOLDER;
X-10GQ22-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; DC Maximum Rating R Load (Contact): 10A@125VDC; Body Width: 17.45 inch;
ROLLER PLUNGER
X-10GQ22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Maximum DC Contact Voltage: 125 V; DC Maximum Rating R Load (Contact): 10A@125VDC;
X-10GQ
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum Operating Temperature: 80 Cel; Maximum DC Contact Voltage: 125 V;
PLUNGER
X-10GS-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SLIM SPRING PLUNGER; Switch Action: MOMENTARY; Electrical Life: 100000 Cycle(s);
2.5
SLIM SPRING PLUNGER
X-10GS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SLIM SPRING PLUNGER; Maximum DC Contact Current: 10 A; Minimum Operating Temperature: -25 Cel;
X-10GW2-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum DC Contact Voltage: 125 V; Maximum Operating Force: 1.42 N;
1.42 N
9.1 mm
X-10GW21-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 125 V; Maximum DC Contact Current: 10 A;
2.1
SHORT HINGE LEVER
2.45 N
5.6 mm
X-10GW21
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Current: 10 A; Minimum Operating Temperature: -25 Cel;
X-10GW22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Sealing: IP00; Maximum DC Contact Current: 10 A;
X-10GW2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; DC Maximum Rating R Load (Contact): 10A@125VDC; Maximum Operating Temperature: 80 Cel;
X-10GW4-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LOW FORCE HINGE LEVER; Maximum Operating Temperature: 80 Cel; Maximum DC Contact Voltage: 125 V;
19.1
LOW FORCE HINGE LEVER
.25 N
14.3 mm
X-10GW4
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LOW FORCE HINGE LEVER; Body Height: 24.2 mm; Maximum DC Contact Voltage: 125 V;
X-10GW
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum DC Contact Current: 10 A; Maximum Operating Temperature: 80 Cel;
XE-N-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Width: 25.4 inch; Maximum DC Contact Current: 10 A;
7
25.4 inch
44.5 mm
86 mm
XE
10.2 N
-10 Cel
3 mm
IP65
XE-NA2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER ARM LEVER; Body Length/Diameter: 86 mm; Maximum DC Contact Current: 10 A;
11.5
ROLLER ARM LEVER
7.26 N
XE-NA277-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ONE WAY ACTION ROLLER ARM LEVER; Maximum DC Contact Voltage: 125 V; Switch Action: MOMENTARY;
ONE WAY ACTION ROLLER ARM LEVER
XE-Q-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Height: 44.5 mm; Body Width: 25.4 inch;
6.4
IP60
XE-Q22-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Minimum Operating Temperature: -10 Cel; Maximum DC Contact Voltage: 125 V;
XE-QA2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER ARM LEVER; Maximum Operating Force: 6.47 N; Switch Action: MOMENTARY;
6.47 N
XV-NA2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER ARM LEVER; Maximum Operating Temperature: 80 Cel; Electrical Life: 100000 Cycle(s);
XV
XV-QA2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER ARM LEVER; Actuator Travel (mm): 11.5; Body Width: 25.4 inch;
XV2-Q22-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Body Length/Diameter: 86 mm; Body Width: 25.4 inch;
XV2
Z-01H-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; AC Maximum Rating R Load (Contact): .1A@125VAC; Switch Action: MOMENTARY;
.63
PIN PLUNGER
25.5 mm
.1A@125VAC
.1 A
.1A@30VDC
30 V
500000 Cycle(s)
.5 mm
Z-01H55-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; AC Maximum Rating R Load (Contact): .1A@125VAC; Maximum DC Contact Current: .1 A;
2.33
3.43 N
-15 Cel
2.2 mm
IP62
Z-01H55
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum DC Contact Current: .1 A; Body Width: 17.45 inch;
Z-01HD-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Maximum Operating Temperature: 80 Cel; DC Maximum Rating R Load (Contact): .1A@30VDC;
SHORT SPRING PLUNGER
Z-01HD55-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Actuator Travel (mm): 3.5; Maximum DC Contact Voltage: 30 V;
3.5
3.62 N
1.9 mm
Z-01HS-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SLIM SPRING PLUNGER; Maximum Pre Travel: .3 mm; Body Width: 17.45 inch;
1.9
2.79 N
.3 mm
Z-01HW22-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Termination Type: SCREW; Maximum AC Contact Current: .1 A;
2.4
1.59 N
Z-01HW2255-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum Operating Force: 1.96 N; Switch Action: MOMENTARY;
1.96 N
Z-01HW2255
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Switch Action: MOMENTARY; Maximum Operating Temperature: 80 Cel;
Z-01HW22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum DC Contact Current: .1 A; Switch Action: MOMENTARY;
Z-01H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Sealing: IP00; Body Length/Diameter: 49.2 mm;
Z-15G-B
Omron Z-15G-B is a SPDT snap action/limit switch with 500000 cycles electrical life. It has IP00 sealing, 15A@250VAC AC max rating, and 0.53mm actuator travel. Ideal for panel mounting applications in environments with temperatures ranging from -25 to 80°C.
.53
15A@250VAC
15 A
15A@14VDC
250 V
14 V
.4 mm
Z-15G55-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Actuator Travel (mm): 2.33; Maximum AC Contact Voltage: 250 V;
4.21 N
Z-15G55
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Voltage: 250 V; AC Maximum Rating R Load (Contact): 15A@250VAC;
Z-15GD-B
Omron Z-15GD-B snap action switch has 500000 cycles electrical life, SPDT switch function, and 15A@250VAC AC max rating. With a short spring plunger actuator type, it is ideal for panel mounting applications requiring momentary switch action.
Z-15GD55-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Actuator Travel (mm): 3.4; Maximum Operating Force: 5.29 N;
3.4
5.29 N
1.8 mm
Z-15GD55
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Body Length/Diameter: 49.2 mm; Maximum DC Contact Voltage: 14 V;
Z-15GD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Maximum DC Contact Current: 15 A; Body Width: 17.45 inch;
© 2023 All rights reserved
