Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
Z-15GW2A55-B5V
Omron
Omron Z-15GW2A55-B5V is a snap action/limit switch with SPDT function. It has an electrical life of 500K cycles, sealing rating of IP62, and can handle up to 15A@250VAC. Ideal for panel mounting applications in environments with temperatures ranging from -15°C to 80°C.
4
HINGE ROLLER LEVER
17.45 inch
39.4 mm
52.8 mm
15A@250VAC
15 A
15A@14VDC
250 V
14 V
500000 Cycle(s)
PANEL MOUNT
1.27 N
80 Cel
-15 Cel
IP62
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SCREW
Z-15GW44A55-B5V
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Voltage: 14 V; Maximum Operating Force: .88 N;
5.6
LONG HINGE LEVER
.88 N
Z-15GWA55-B5V
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Width: 17.45 inch; Switch Action: MOMENTARY;
HINGE LEVER
.98 N
Z-15H2-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; DC Maximum Rating R Load (Contact): 15A@14VDC; Actuator Travel (mm): .43;
.43
PIN PLUNGER
25.5 mm
49.2 mm
2.5 N
-25 Cel
.3 mm
IP00
Z-15H2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Termination Type: SOLDER; Sealing: IP00;
SOLDER
D2A-1110
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Body Width: 4.2 inch;
4.2 inch
6 mm
8 mm
.1 A
.1A@30VDC
30 V
50000 Cycle(s)
D2A
THROUGH HOLE-RIGHT ANGLE
-10 Cel
D2MV-01-1C1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 1000000 Cycle(s); Maximum AC Contact Voltage: 125 V;
2.5
10.3 inch
15.9 mm
31.8 mm
.1A@125VAC
125 V
1000000 Cycle(s)
D2MV
.1 N
1.2 mm
IP40
D2MV-01-1C2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .25 N; Maximum Pre Travel: 1.2 mm;
.25 N
D2MV-01L-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Sealing: IP40; Maximum AC Contact Voltage: 125 V;
5.4
.29 N
3.3 mm
D2MV-01L111-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Voltage: 30 V; Manufacturer Series: D2MV;
10
.15 N
D2MV-01L13-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Pre Travel: 3.3 mm; AC Maximum Rating R Load (Contact): .1A@125VAC;
5.2
SIMULATED ROLLER LEVER
D2MV-01L2-1C3
Omron's D2MV-01L2-1C3 is a SPDT snap action/limit switch with 1000000 cycle electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25 to 80 °C. Ideal for panel mounting applications, it offers 0.1A@125VAC AC max rating and 0.1A@30VDC DC max rating.
D2MV-01L22-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum DC Contact Current: .1 A; Body Length/Diameter: 31.8 mm;
2.7
SHORT HINGE ROLLER LEVER
.49 N
1.7 mm
D2MV-1-1C1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum DC Contact Current: 1 A; Maximum Pre Travel: 1.2 mm;
1A@125VAC
1 A
1A@30VDC
D2MV-1-1C2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Pre Travel: 1.2 mm; Manufacturer Series: D2MV;
D2MV-1-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; AC Maximum Rating R Load (Contact): 1A@125VAC; Maximum DC Contact Voltage: 30 V;
D2MV-1L11-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum Pre Travel: 1.7 mm; Sealing: IP40;
SHORT HINGE LEVER
D2MV-1L111-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum AC Contact Current: 1 A; Maximum Pre Travel: 6 mm;
D2MV-1L2-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum DC Contact Current: 1 A; Maximum AC Contact Current: 1 A;
D2MV-1L22-1C3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Sealing: IP40; Body Height: 15.9 mm;
D2RV-E
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 60 Cel; Body Height: 15.9 mm;
2.2
27.8 mm
.25 A
.25A@100VDC
100 V
3000000 Cycle(s)
D2RV
60 Cel
1.6 mm
SPST
D2RV-G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 27.8 mm; Maximum Pre Travel: 1.6 mm;
D2RV-L13
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Actuator Travel (mm): 5; Minimum Operating Temperature: -10 Cel;
5
4 mm
D2RV-L22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum Operating Temperature: 60 Cel; Electrical Life: 3000000 Cycle(s);
1.8 mm
D2RV-L2G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE ROLLER LEVER; Body Width: 10.3 inch; Maximum Pre Travel: 4 mm;
D2RV-L
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Maximum Pre Travel: 4 mm; Manufacturer Series: D2RV;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Maximum DC Contact Current: .25 A; Manufacturer Series: D2RV;
D3DC-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Width: 8.5 inch; Maximum DC Contact Voltage: 30 V; Maximum Operating Temperature: 85 Cel;
7
8.5 inch
12.1 mm
19 mm
100000 Cycle(s)
e4
D3DC
85 Cel
SILVER
QUICK CONNECT
1VAP2-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PUSH-PULL PLUNGER; Termination Type: SCREW; Sealing: IP00;
6.4
PUSH-PULL PLUNGER
13.2 inch
39.8 mm
40.6 mm
15A@125VAC
25000 Cycle(s)
17.6 N
4.4 mm
1VAP2-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PUSH-PULL PLUNGER; Termination Type: SCREW; Body Height: 46 mm;
12.7 inch
46 mm
D2QW-C073D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEAF LEVER; Body Width: 5.3 inch; Maximum DC Contact Current: .1 A;
3.5
SIMULATED ROLLER LEAF LEVER
5.3 inch
9.3 mm
13.3 mm
200000 Cycle(s)
1.5 N
-40 Cel
IP67
QUICK CONNECT/SOLDER
D2VW-5L1-1M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Actuator Travel (mm): 5.6; AC Maximum Rating R Load (Contact): 5A@250VAC;
33 mm
5A@250VAC
5 A
5A@30VDC
1.18 N
EPOXY TERMINAL SEALED; IP67
WIRE
A-20G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 49.2 mm; Maximum Operating Temperature: 80 Cel;
1.55
24.2 mm
20A@250VAC
20 A
.5 A
.5A@125VDC
6.13 N
1.3 mm
A-20G-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 500000 Cycle(s); Maximum Operating Force: 6.13 N;
A-20GD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Switch Action: MOMENTARY; Body Height: 24.2 mm;
4.3
SHORT SPRING PLUNGER
A-20GD-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT SPRING PLUNGER; Switch Action: MOMENTARY; Body Width: 17.45 inch;
A-20GQ
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Actuator Travel (mm): 6.9; Maximum DC Contact Current: .5 A;
6.9
PLUNGER
A-20GQ21
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Maximum DC Contact Voltage: 125 V; Body Height: 24.2 mm;
4.88
ROLLER PLUNGER
6.18 N
A-20GQ21-B
Omron A-20GQ21-B is a SPDT snap action/limit switch with 500000 cycles electrical life. It has a max AC contact current of 20A@250VAC and operates b/w -25 to 80 °C. Ideal for panel mounting, it features a roller plunger actuator with 4.88mm travel suitable for various industrial applications.
A-20GQ22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Maximum Pre Travel: 1.3 mm; Body Length/Diameter: 49.2 mm;
A-20GQ22-B
Omron A-20GQ22-B is a SPDT snap action/limit switch with 500000 cycles electrical life. It has a max AC contact current of 20A@250VAC and operates b/w -25°C to 80°C. Ideal for panel mounting applications, featuring roller plunger actuator with 4.88mm travel and 6.18N operating force.
A-20GQ-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum AC Contact Voltage: 250 V; Maximum Pre Travel: 1.3 mm;
A-20GV
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Width: 17.45 inch; Minimum Operating Temperature: -25 Cel;
19.9
.69 N
A-20GV2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum Pre Travel: 12 mm; Minimum Operating Temperature: -25 Cel;
14.4
12 mm
A-20GV21
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Body Width: 17.45 inch; Minimum Operating Temperature: -25 Cel;
7.7
1.57 N
6.5 mm
A-20GV21-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 125 V; DC Maximum Rating R Load (Contact): .5A@125VDC;
A-20GV22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Electrical Life: 500000 Cycle(s); Maximum AC Contact Voltage: 250 V;
7.5
6.3 mm
A-20GV22-B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Electrical Life: 500000 Cycle(s); Maximum Operating Temperature: 80 Cel;
© 2023 All rights reserved
