Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Omron D2SW-P01L3M is a snap action/limit switch with SPDT function. It has an electrical life of 200,000 cycles and sealing rating of IP67, making it suitable for harsh environments. With a max operating temperature of 70°C and actuator travel of 0.8mm, it is commonly used in panel mount applications requiring momentary switch action.
Median Price
$4.940
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$3.586
1k+ parts
$2.805
10k+ parts
-
Mouser Electronics
$3.210
$3.060
Master Electronics
$6.030
$5.710
Verical
$3.515
Component Electronics Inc.
$4.230
$3.170
$2.750
Nova Conductors
$4.457
TME
$4.700
$3.360
$3.220
TodayComponents
$8.750
$7.910
Vyrian
Electro Sonic
$7.370
$6.360
IBS Electronics
$5.101
$3.903
Continental Prestige Electronics
$2.979
$2.919
Argo Parts USA
Kepictronics
Netroflash
$4.368
$4.234
$4.145
Perfect Parts
With a high electrical life of 200000 cycles, this switch offers long-lasting performance and reliability.
The wide body width of 6.4 inches provides stability and durability to the switch.
With IP67 sealing, this switch is dust-tight and can withstand immersion in water up to 1 meter for 30 minutes, making it suitable for various industrial environments.
The SPDT switch function allows for flexibility in controlling different circuits with a single switch.
The compact body height of 11 mm makes this switch suitable for applications where space is limited.
With a maximum operating temperature of 70°C, this switch can perform reliably in a wide range of operating conditions.
The maximum AC contact current of 0.1 A allows for efficient electrical connections without risk of overload.
With a minimum operating temperature of -20°C, this switch can function in cold environments without any issues.
The actuator travel of 0.8 mm ensures precise and accurate operation of the switch.
The simulated roller lever actuator type offers smooth actuation and reliable operation in various applications.
With a maximum DC contact voltage of 30 V, this switch can safely control DC circuits without risk of damage.
The snap acting/limit switch type provides quick and reliable switching action for controlling circuits.
With an AC maximum rating load of 0.1A at 125VAC, this switch is suitable for handling moderate electrical loads.
The compact body length/diameter of 19.8 mm allows for easy installation in various equipment and machinery.
With a maximum operating force of 0.6 N, this switch can be easily actuated without exerting too much force.
With a DC maximum rating load of 0.1A at 30VDC, this switch is suitable for controlling DC circuits with low to moderate current requirements.
The maximum DC contact current of 0.1 A allows for efficient control of DC circuits without risk of overload.
The momentary switch action provides on-off control for various applications where temporary activation is required.
The wire termination type offers easy and reliable electrical connections for quick installation and maintenance.
With a maximum AC contact voltage of 125 V, this switch can handle standard AC voltage levels for reliable performance.
The panel mount feature allows for secure and stable installation of the switch on control panels and equipment.
Snap Action & Limit Switches D2SW-P01L3M attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D2SW-P01L3M Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
EU2B-YS3303C
Idec
ROTARY SWITCH;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Infineon Technologies
NXP Semiconductors
Hitachi
Zetex Plc
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
SPC TECHNOLOGY/ MULTICOMP
Tak Cheong Electronics Holdings
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SSCEB31C
Honeywell Sensing And Control
SSCEB31C by Honeywell Sensing And Control is a SPDT snap acting/limit switch with IP68 sealing. It features a roller plunger actuator, 4mm travel, and 11.9N max operating force. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -40°C to 90°C.
9007AO32
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
TMCGF5SA1540C
Itt Cannon
The ITT Cannon TMCGF5SA1540C is a SPDT snap action/limit switch with 10.2" width, 15.7mm height, and 27.7mm length/diameter. It operates b/w -55°C to 150°C, handles up to 1A@125VAC or 1A@30VDC, and has a max operating force of 0.44N. Ideal for panel mounting applications requiring high force actuation in industrial settings.
D413-R1LD-G2
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Length (Actuator): .122 inch; Minimum Operating Temperature: -40 Cel; Body Width: 10.3124 inch; Body Height: 15.9004 mm;
BZ-2R725551-A2
BZ-2R725551-A2 by Honeywell is a 17.45mm wide snap action switch with SPDT function and splash-proof sealing. It has a max AC contact current of 1A@125VAC, suitable for panel mounting applications requiring momentary switch action. The sealed plunger type actuator offers an actuator travel of 0.13mm, making it ideal for various industrial control systems.
ESE23F001
Panasonic
E79-30A
The Cherry
The Cherry E79-30A snap action/limit switch has DPDT switch function, 6000 cycles electrical life, and 10A@250VAC AC max rating. It is used for panel mounting applications requiring a momentary pushbutton actuator with 5.72mm travel distance and -40 to 85°C operating temperature range.
ZC-Q2255-L4
Omron
ZE-N22-2S
SS-5GL2-FD
Omron SS-5GL2-FD is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25°C to 85°C. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating and 5A@14VDC DC max rating.
SS-5GL111-FT
109HM1
109HM1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and hermetically sealed for corrosion protection. It operates b/w -184°C to 121°C, has a max DC contact voltage of 28V, and is ideal for panel mounting applications requiring momentary switch action.
XCMD2911L1
914CE31-3L1
The Honeywell Sensing And Control 914CE31-3L1 is a SPDT snap action/limit switch with IP66, IP67, and IP68 sealing. Featuring a TOP ROLLER PLUNGER actuator type, it has a max operating force of 17.5N and can handle up to 240V AC contact voltage. Ideal for panel mounting applications with temperatures ranging from -40°C to 70°C.
D453-B8MD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STRAIGHT LEVER; Contact Function: ON-(ON); Maximum Operating Temperature: 85 Cel;
LS3YDC1A
LS3YDC1A by Honeywell is a SPDT snap action/limit switch with EPOXY terminal sealing (IP65, IP66, IP67). It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in environments with temperature range from -12°C to 121°C.
SS-01GL2-F
Omron SS-01GL2-F is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25 to 85 °C. Ideal for panel mounting applications, it offers 0.1A@125VAC AC max rating and 0.1A@30VDC DC max rating.
D4C-1620
Omron D4C-1620 is a snap action/limit switch with SPDT function, IP67 sealing, and 200000 cycle electrical life. It features roller lever actuator type, 5A@250VAC AC max rating, and -10 to 70°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
1SX1-T2
Micro Switch
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Maximum Operating Temperature: 121 Cel; Maximum AC Contact Voltage: 250 V;
ZM10D20D01
ZM10D20D01 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 1000000 cycles electrical life. Featuring a long straight lever actuator, it has a max operating force of 1.02N and operates b/w -40°C to 120°C. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -40°C to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D2SW-3H
Snap Acting/Limit Switches;
D2SW-P2L3B
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; DC Maximum Rating R Load (Contact): 2A@30VDC; Sealing: IP67;
D2SW-3L2MS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum Operating Force: .58 N; Actuator Travel (mm): 1;
D2SW-3L1MS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; DC Maximum Rating R Load (Contact): 3A@30VDC; Electrical Life: 200000 Cycle(s);
D2SW-01L1TS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Electrical Life: 200000 Cycle(s); Body Width: 6.4 inch;
D2SW-01L1D
D2SW-01L2-3M
D2SW-01L2D
D2SW-01-3M
D2SW-01H
D2SW-01L1H
D2SW-01L1T
D2SW-01L1-3M
D2SW-01L2-2M
D2SW-01DS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Pre Travel: .6 mm; Maximum Operating Temperature: 85 Cel;
D2SW-01L1HS
Omron D2SW-01L1HS is a SPDT snap action/limit switch with 200000 cycles electrical life. It has IP67 sealing, operates b/w -40 to 85°C, and supports 0.1A@125VAC AC max rating. With HINGE LEVER actuator type, it is ideal for applications requiring momentary switch action in harsh environments.
D2SW-01HS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Switch Action: MOMENTARY; Maximum AC Contact Voltage: 125 V;
D2SW-01L1M
D2SW-01L1M-0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved